Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1/4 FNPT female V style steel coupler gives you a high flow connection point for air line setups where you want strong steel construction and a 1/4 inch female national pipe thread for threading into existing air manifolds, hoses, or tools. The Milton Industries V style coupler design provides a 1/4 inch basic flow size, so the internal passage is sized to support higher volume air movement than many smaller-body fittings, helping tools stay supplied under load. This female coupler is built to accept A, M, and V style plugs, so one connection point can work with multiple plug types already in use around the shop, reducing changeovers between different air fittings. It is described as perfect for high volume, low pressure applications, which matches common shop air uses where strong flow at moderate pressure keeps pneumatic tools running consistently on longer cycles.
The sleeve release on this Milton Industries 1/4 inch FNPT V style coupler is a push type, which means engagement and removal rely on simple push and pull motions that speed up hose or tool changes at the fitting. To engage, the plug is pushed into the coupler, so connection can be made with one straightforward movement during setup on ladders, in tight bays, or along bench manifolds. To disconnect, the sleeve is pulled back to remove the plug, so releasing a hose or tool is a predictable, repeatable motion that fits into normal changeover routines. This push type sleeve arrangement reduces hand motions at the coupling point, which helps keep air line changes quick and consistent when several tools share the same high flow connection in busy work areas.
The 1/4 inch female national pipe thread on the Milton Industries 764ST V style coupler fits air line components tapped with matching 1/4 FNPT threads, so it can be positioned on manifolds, drops, or hose ends built around that standard. The coupler body is an air line fitting in the air line components and accessories class, so it is suited to installations that route compressed air toward tools in woodworking shops and similar environments that rely on air distribution. With a 1/4 inch basic flow size and high flow V style format, it suits runs that are configured to deliver more air volume, supporting tools that draw steadily in high volume, low pressure service. The ability to accept A, M, and V style plugs expands where this single threaded outlet can be used across different branches of the system that may be equipped with those plug standards.
The air flow rating of 74 standard cubic feet per minute means this V style high flow coupler is built to pass a substantial volume of air, which helps maintain consistent delivery when air-hungry tools operate for extended periods. The maximum inlet pressure rating of 300 pounds per square inch allows the coupler to function within commonly used compressed air system pressures up to that limit, so it can be installed in main or branch lines that operate at those pressures. A maximum temperature rating of 250 degrees Fahrenheit indicates the coupler is configured to handle typical compressed air temperature ranges, supporting stable performance in normal shop environments. Because it is ideal for high volume, low pressure applications, the fitting aligns well with air circuits that prioritize flow over extreme pressure, helping sanding, blowing, or other continuous-duty tools hold performance. The push type sleeve release keeps plug changes at this high flow point straightforward, so hoses and tools that use A, M, or V style plugs can be swapped without complex motions at the fitting.
The Milton Industries 764ST V style coupler has a 1/4 inch female national pipe thread, so it threads onto air line components tapped to accept 1/4 FNPT fittings in compressed air systems.
This V style high flow coupler will accept A, M, and V style plugs, so hoses or tools set up with any of those plug patterns can connect at the same coupler point.
The 1/4 FNPT female V style steel coupler uses a push type sleeve release: push the plug into the coupler to engage, then pull the sleeve back to remove the plug when disconnecting.
The Milton Industries 764ST V style coupler has an air flow of 74 standard cubic feet per minute, supporting higher volume delivery for demanding air tools and circuits.
The Milton 764ST 1/4 inch FNPT high flow air coupler has a maximum inlet pressure of 300 pounds per square inch, so it matches many shop compressed air systems.
The 1/4 FNPT female V style air line coupler is described as perfect for high volume, low pressure applications, aligning with setups that emphasize airflow over very high pressure.
The 1/4 FNPT female V style steel coupler from Milton Industries brings a 1/4 inch basic flow size, 74 standard cubic feet per minute airflow, and a 300 PSI maximum inlet pressure to air line builds where higher volume delivery is important. Its ability to accept A, M, and V style plugs lets one threaded point serve multiple tools and hoses, while the push type sleeve release keeps changeovers efficient at the fitting. When the air system is geared toward high volume, low pressure work, this V style high flow coupler offers a threaded female 1/4 FNPT connection that aligns with that role along the line.
Sold In: 1 Each