Milton Air Leader Hose, 3/8" x 6' Rubber Hose - 1/4" NPT Brass Ends 300 Max PSI

Milton Air Leader Hose For Pneumatic Connections

Milton air leader hose 3/8 inch x 6 foot is an EPDM rubber air hose assembly that connects pneumatic hose reels or compressors to rigid air piping. This gives you a flexible transition point that handles movement without stressing metal lines. The hose uses nylon-reinforced EPDM rubber rated to 300 PSI, so it supports typical shop air pressures while maintaining structural integrity. A 3/8 inch inner diameter balances airflow with manageable hose size, which helps keep pressure loss low between supply and downstream tools. Brass 1/4 inch NPT male and 1/4 inch NPT female fittings match common pneumatic connection points, so the hose ties into standard air system components. The EPDM compound stays flexible from -5 to 150 degrees F, which helps the hose bend cleanly during cold starts or warm operation without kinking or cracking.

Key Leader Hose Details For Shop Use

• The 6 foot length bridges between rigid air piping and components, giving room for reels or compressors to move slightly without stressing hard pipe joints.
• A 3/8 inch inner diameter provides a clear air path from supply to downstream hose, helping support consistent airflow to spray guns and other pneumatic tools.
• EPDM rubber construction with nylon reinforcement allows the hose to handle up to 300 PSI, supporting typical compressed air system pressures in workshop settings.
• Brass 1/4 inch NPT male and 1/4 inch NPT female fittings match standard air connections, simplifying hook-up to supply lines, hose reels, compressors, and other pneumatic components.
• Flexibility from -5 to 150 degrees F helps the hose stay workable during colder mornings and warmer operating conditions, which supports reliable routing and reduced strain at connection points.

Leader Hose Mounting And Connection Details

This air hose assembly uses a 1/4 inch NPT male fitting on one end and a 1/4 inch NPT female fitting on the other, which lets you thread directly onto rigid air piping or mating pneumatic components. With a 6 foot overall length, the hose spans from fixed piping to hose reels, compressors, or other devices while allowing slight movement without stressing threaded joints. The 3/8 inch inner diameter maintains a solid flow path from the supply side into your main hose runs, which is useful for spray equipment and other air-hungry tools. The EPDM rubber body stays flexible at temperatures as low as -5 degrees F, so the hose can be routed around equipment or reels even when the shop is cold.

Using This Air Hose Assembly In Your System

Where This Milton Hose Fits Into Air Lines

This Milton Industries air leader hose is designed to connect rigid air piping to components such as supply lines, hose reels, compressors, and other pneumatic system parts. By placing this 6 foot EPDM rubber hose between fixed pipe and a hose reel, the flexible section absorbs movement as the reel pays out or retracts hose, which reduces installation difficulty compared with running hard pipe to the reel. When used between rigid piping and a compressor, the hose allows minor vibration and motion without transferring as much stress to threaded joints. The 3/8 inch inner diameter and 300 PSI rating suit many spray equipment and shop air applications, allowing the hose to serve as a transition from the main supply line to downstream hoses or tools.

Details That Support Lower Noise And Vibration

The nylon-reinforced EPDM rubber construction provides a flexible link that helps lower overall vibration and noise compared with hard metal connections. When mounted between rigid air piping and a compressor or hose reel, the hose flexes as equipment runs or moves, which reduces direct vibration transfer into the piping. The 6 foot length gives enough run to form gentle bends, improving durability by avoiding tight kinks that could stress the hose wall. Operating flexibility from -5 to 150 degrees F means the hose can flex consistently in typical shop environments, supporting repeatable performance across seasons. Brass 1/4 inch NPT male and female fittings maintain solid threaded engagement and a stable seal point at each end, helping the assembly perform as a reliable link in the air system.

Common Questions About This Milton Leader Hose

Selecting This Hose For Your Pneumatic Layout

This Milton Industries 2760-6LH leader hose combines a 3/8 inch inner diameter, 6 foot length, and 300 PSI nylon-reinforced EPDM rubber construction to form a practical link between rigid air piping and components. Brass 1/4 inch NPT male and female ends thread directly into common spray equipment and compressed air layouts, so it fits naturally into many shop systems. When a flexible transition is needed between fixed pipe and hose reels, compressors, or supply lines, this air hose assembly offers a straightforward way to support airflow while reducing vibration transfer. Add it anywhere a short, flexible air connection improves how your pneumatic system runs.