Schwinn 6K136 corner bracket is a light gray corner bracket designed to work with L and C channels, giving you a simple way to secure channel-based hardware at corners. The bracket features a 5/8 in (16 mm) center to center spacing, so it lines up with hardware layouts that follow this standard distance. The innovative twist-lock design lets the corner bracket slide into the back of the L or C channel and then twist to lock into place, creating a positive connection between the channel and the bracket. Once locked, the bracket can be screwed into a side panel or underside of a counter with #6 wood screws, tying the channel assembly firmly into your cabinet or counter structure.
The twist-lock corner bracket design allows you to slide the bracket into the back of the L or C channel before fastening, so you can position the channel and bracket as a single unit at the corner. After sliding it into place, twisting the Schwinn 6K136 corner bracket locks it into the channel, which holds the bracket steady while you mark or drive #6 wood screws. Screwing into a side panel or underside of a counter keeps the load path right in the cabinet structure, which helps keep channel-mounted hardware tracking true along the corner.
This light gray corner bracket is built for use with L and C channels, so it fits projects that run channel-based hardware around inside or outside corners. The 5/8 in (16 mm) center to center spacing on the Schwinn 6K136 corner bracket suits layouts that repeat that spacing from run to run, helping your corners carry the same rhythm as straight sections. Because the bracket can screw into a side panel or underside of a counter with #6 wood screws, it fits cabinet interiors, counter supports, and similar wood-based structures where those substrates are available. The light gray color works well anywhere a neutral tone helps the bracket visually recede behind the primary decorative hardware.
The innovative twist-lock feature on this corner bracket lets it slide into the back of the L or C channel before twisting, so the bracket and channel stay mechanically linked during layout. That link reduces the chance of relative movement between the channel and Schwinn 6K136 corner bracket while you position the assembly at a corner, which supports cleaner alignment from one installation to the next. Locking the bracket into the channel also helps transfer forces directly through the bracket into the side panel or underside of the counter once you drive the #6 wood screws, keeping the corner tie-in solid over time. Working with a defined 5/8 in (16 mm) center to center spacing means your measurements stay predictable as you repeat the same setup across multiple units or jobs.
The Schwinn 6K136 corner bracket is described for use with L and C channels, so it is intended to secure channel-based hardware runs at corners using those channel profiles.
The corner bracket slides into the back of the L or C channel and then twists to lock into place, so the bracket and channel stay connected during positioning and fastening.
The 5/8 in (16 mm) center to center spacing defines the hole or fastening distance on the corner bracket, so it aligns with layouts based on that standard spacing.
The light gray corner bracket is designed to be screwed into a side panel or underside of a counter, tying the L or C channel directly into those structural surfaces.
The Schwinn Hardware corner bracket is described for use with #6 wood screws, which lets you mount it into wood side panels or wood counter undersides.
The light gray finish keeps the Schwinn 6K136 corner bracket visually neutral, so it can blend with light-toned channels and surrounding hardware in finished cabinetry.
The Schwinn 6K136 corner bracket gives you a twist-lock way to secure L and C channels at corners using #6 wood screws into side panels or counter undersides. The 5/8 in (16 mm) center to center spacing and light gray finish support consistent, clean-looking channel installations across cabinets and counters.