6K350 90 Degree Connector from Schwinn Hardware is a light gray plastic connector that holds two miter cut sections of channel together at an inner or outer corner, giving a clean, fixed 90 degree transition where channels change direction.
The 90 degree design sets the angle between the two channel sections, so the mitered pieces align into a true right angle rather than drifting, which helps keep channel runs straight and consistent through inside or outside corners.
The connector works specifically with channel that is miter cut, so the joint relies on both the cut geometry and the connector body to support the corner, helping the two channel pieces act as one continuous length visually and structurally at the turn.
The light gray plastic construction sets an unobtrusive tone in installations that use gray-toned components, so the connector visually blends into the overall channel layout rather than drawing attention at each mitered corner.
The SAP Description 90 DEG CONNECTOR USE W/C/L-CHANNELS,GRAY confirms that this connector is intended for use with channels, so installers can plan it as the element that ties those channel pieces together where they meet at a right angle.
The Web Description specifying miter cut sections means each channel length is cut on a matching angle for the corner, and the connector then supports those cuts, turning a potentially fragile joint into a more unified corner that better resists separation in day-to-day use.
Because the connector handles inner or outer corners, a single approach to cutting and joining channels can carry through various cabinet or wall conditions, reducing the variation in techniques needed on an installation with several different corner types.
The Category listing as Decorative Hardware & Moldings and Handles and Pulls places this 6K350 90 Degree Connector in the decorative hardware realm, so it serves projects where visible channel details contribute to the finished look as much as function.
The Web Description that it holds two miter cut sections of channel together at an inner or outer corner points directly to layouts where channels wrap cabinet banks, shelving runs, or wall panels and need a controlled 90 degree change in direction.
In such runs, the connector helps the mitered ends of the channels meet accurately, so the corner presents as a crisp, continuous line instead of a misaligned joint, which matters when channels frame high-visibility areas on finished woodworking.
The light gray plastic noted in the Product Name supports designs using gray-toned channels or surrounding materials, so the connector can sit at eye level in installations without breaking the color rhythm along those corners.
Branding as Schwinn Hardware means the connector aligns with Schwinn decorative hardware and moldings, helping designers and installers maintain a consistent hardware brand across handles, pulls, and related channel components within the same project.
The fixed 90 degree angle built into this connector governs how the two channel segments meet, so every inner and outer corner can repeat the same geometry, which simplifies laying out multiple cabinets or wall segments in a straight line.
Since the connector is designed specifically to hold miter cut channel sections, it gives the mitered edges a defined meeting point, which reduces the tendency of the cuts to separate over time and helps preserve a tight visual line at the joint.
The ability to work on both inner and outer corners means the same connector behavior applies whether the channel turns around an outside edge or recedes into an inside corner, allowing installers to rely on one part pattern across different corner conditions.
The light gray plastic construction keeps the connector visually modest against many gray or neutral surfaces, so the focus remains on the channel layout rather than on the joint itself, which benefits projects aiming for uninterrupted lines around corners.
Identification by Manufacturer Part # 59297 ties this connector to a specific Schwinn Hardware part, helping projects that repeat the same channel detail across multiple phases to specify the same connector each time and hold the same corner appearance.
The 6K350 90 Degree Connector holds two miter cut sections of channel together at a 90 degree inner or outer corner, so the channel changes direction cleanly.
The 90 Degree Connector is described for inner or outer corners, so the same part maintains a right angle and alignment where channels wrap inside or outside edges.
The Product Name states light gray plastic, so the connector visually supports gray color schemes and uses a non-metallic material in decorative hardware layouts.
The Web Description specifies miter cut sections of channel, so the connector is intended to join channels that are cut on matching angles for a 90 degree corner.
The connector is from Schwinn Hardware and carries Manufacturer Part # 59297, so projects can reference this exact item when repeating channel corner details.
The Category lists Decorative Hardware & Moldings and Handles and Pulls, so the connector fits into visible decorative hardware planning around channels.
The 6K350 90 Degree Connector, described as a light gray plastic Schwinn Hardware part, offers a defined way to hold two miter cut channel sections together at inner or outer corners whenever a right angle change in direction is required.
Using a connector identified specifically as a 90 degree solution for miter cut channel sections lets installers and fabricators plan repeatable corner details across cabinet, panel, or wall layouts that rely on decorative channels running through multiple corners.