Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Schwinn 6K376 silver L cap right is a plastic end cap designed to terminate an L-channel, so the open profile ends cleanly against the inside of a cabinet or wall. The SAP description "L-CAP RIGHT FOR L-CHANNEL, SILVER FINISH" identifies it as a right-side piece shaped for L-channel profiles, which supports accurate orientation when laying out channel runs. The 2-1/4 in (57 mm) length gives a defined termination point along the channel, helping align the finished edge with adjacent cabinet parts. The silver finish is specified to match clear anodized channel, keeping the visual line consistent when you run aluminum channel into a cabinet side. As part of the Schwinn 6K376 series from Schwinn Hardware, this cap fits into decorative hardware and moldings workflows where a finished channel edge is required.
The SAP Description and Web Description both state that this Schwinn 59260 component is an L-cap for L-channel, so it is intended to interface directly with that channel profile, which helps create a defined end where the channel meets cabinet sides or walls. Because it is the right version, the geometry is oriented for the right-hand termination, which matters when you mirror left and right ends across a cabinet layout. The 2-1/4 in (57 mm) length gives a known dimension to work with when locating the end of the channel run, helping align the cap to adjacent fronts or interior panels. The plastic construction works with the metal clear anodized channel it visually matches, which supports a clean junction between materials along the installation line.
The Web Description explains that these plastic end caps give the channel a finished termination when butting up against the inside of a cabinet or wall, so this Schwinn 6K376 silver L cap right is suited to locations where an L-channel stops at a cabinet side, partition, or building wall. Because the description ties the silver finish to clear anodized channel, it integrates into channel runs that use clear anodized aluminum, keeping the appearance consistent as the run ends. The 2-1/4 in (57 mm) length creates a defined segment at the channel termination, which helps coordinate with cabinet reveals or interior clearances around doors, panels, or shelves. As a right-hand L-cap, it fits the right side of a run, so it works as part of a pair when the opposite end of the same L-channel requires a corresponding termination. Within decorative hardware and moldings workflows, it functions as the detail that closes out the exposed channel line inside casework.
The Web Description states that the silver version matches clear anodized channel, so the color and finish are chosen to sit next to clear anodized L-channel without a visible mismatch, which keeps the channel run looking continuous where it meets the interior of a cabinet or a wall. The specified 2-1/4 in (57 mm) length provides a predictable dimension at the end of the channel, which lets installers coordinate the termination with cabinet joinery, end panels, or wall lines. Identifying the part as an L-cap right for L-channel signals that its shape is tailored to that specific profile and orientation, which supports repeatable fit when multiple cabinets or channels are laid out using the same Schwinn 6K376 series. The plastic material described for the end cap closes the open end of the channel, which helps keep the channel edge smooth at the termination point and supports a finished look in decorative handle and pull applications.
The Schwinn 59260 cap is described as an L-cap for L-channel, so it is intended to terminate L-channel profiles, creating a defined end where the channel meets cabinet sides or walls.
The SAP Description labels the part as L-CAP RIGHT FOR L-CHANNEL, so this 59260 model is the right-hand version, used on the right end of an L-channel run.
The product name lists the Schwinn 6K376 silver L cap right as 2-1/4 in (57 mm) long, giving a fixed termination length for planning channel layout and visual alignment.
The Web Description specifies a silver finish that matches clear anodized channel, so the cap aligns visually with clear anodized L-channel in decorative hardware runs.
The Web Description identifies it as a plastic end cap, so the part uses plastic to close the channel end and present a smooth termination surface.
The Web Description notes that installation drawings are available at the provided Schwinn URL, supporting layout and orientation details for this L-cap within the channel system.
This Schwinn Hardware 6K376 series 2-1/4 in (57 mm) long silver L cap right is defined as an L-cap right for L-channel, so it is built to finish the right end of compatible L-channel runs. The plastic end cap construction and silver finish matched to clear anodized channel give the termination a smooth, coordinated appearance at the point where the channel meets the inside of a cabinet or a wall. With a known length and orientation, this Schwinn 59260 component helps plan consistent terminations across multiple cabinet or wall-mounted channel applications.