Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Schwinn component is a right-hand rectangular end cap for the 6K377 L-channel handleless profile system, finished in Anodized Nickel. It closes the cut right-hand end of a profile run so the open channel section is not left exposed in the finished installation.
A handleless L-channel profile is cut to length on site, and every cut leaves the channel's cross-section open at the end. In a kitchen or built-in finished in lighter, cooler hardware tones, that open end draws the eye in exactly the wrong way. This rectangular cap seats over the right-hand end of the 6K377 run and closes it cleanly, so the profile reads as a finished element from corner to corner rather than as cut extrusion. The Anodized Nickel finish suits installations where the surrounding pulls, hinges, or appliance hardware are already in a silver or nickel tone, letting the profile system read as part of a coordinated scheme rather than a contrasting element.
The cap is plastic, measuring 2-1/4 inches long and 1-1/16 inches wide, with a minimal 1/16 inch projection beyond the profile face. It is made specifically for the 6K377 rectangular L-channel family. L-channel and C-channel components are not interchangeable, and components across Schwinn's series families are dimensioned to their own profiles, so the 6K377 cap will not seat correctly in a 6K378 or any other series. Anodized Nickel is Schwinn's finish name for this component; it does not carry a stated match to any specific profile finish, so confirm the finish pairing against the profile you are ordering.
This cap suits a cabinetmaker, installer, or kitchen designer completing a run of Schwinn 6K377 L-channel profiles in Anodized Nickel. It is the right-hand piece, so a run that is open at both ends requires this cap and the matching left-hand cap, which is sold separately. Shops running profiles across multiple kitchens in a silver-tone finish program will want to stock both hands together to avoid a stall at finishing.
No. It is dimensioned for the 6K377 rectangular profile family. Other Schwinn series carry their own caps, and components are not interchangeable between series.
The left-hand rectangular cap for the 6K377 is a separate item. A run open at both ends requires both hands.
No. L-channel and C-channel components are different shapes and are not interchangeable.
The listing does not state included fasteners or clips. Confirm what your installation requires before ordering.
This is the detail piece that completes a 6K377 L-channel installation in Anodized Nickel — order the left-hand cap alongside it if both ends of the run are open.