Schwinn 6K378 Series dark bronze C cap defines this set of rectangular plastic end caps designed for the Schwinn C-channel, so the channel terminates with a clean, intentional stop instead of an exposed profile at the end run. The 2-7/8 in (73 mm) long size gives each end cap enough length to cover the channel edge where it butts against the inside of a cabinet or a wall, hiding the raw cut of the channel along that final segment. The dark bronze finish lets the visible end of the C-channel blend with dark-toned hardware layouts, avoiding a bright or mismatched edge at the termination point. The rectangular shape of this Schwinn Hardware C cap rectangular set aligns with the channel geometry, so the finished termination follows the existing lines of the channel installation. The Schwinn Hardware brand identity and specific 59274 part number give installers a consistent reference when matching other Schwinn C-channel components on repeat projects.
The Schwinn 6K378 C channel end cap set is described as plastic end caps for C-channel, which means each piece is formed to work with the Schwinn C-channel profile rather than a generic trim shape during cabinet or wall terminations. The left and right orientation in the rectangular C cap left and right description translates into a distinct cap for each side of the channel run, helping the installer match each end cap to the direction in which the channel butts against cabinet sides or a vertical wall surface. The 2-7/8 in (73 mm) length works along the end portion of the channel, so when the channel is cut for a cabinet interior, that full length of cap can sit at the termination, reducing visual impact from cut ends. The dark bronze color aligns with the dark bronze channel finish option referenced in Schwinn material, which keeps the transition from channel to end cap visually aligned along that end joint.
The Schwinn 6K378 Series dark bronze C cap is identified for use with a C-channel when the channel is butting up against the inside of a cabinet or a wall, so it naturally fits projects where channels terminate against interior cabinet sides or structural wall panels. Because the web description specifies that these plastic end caps give the channel a finished termination in those situations, they align well with cabinet interiors that use C-channel profiles as functional or decorative hardware elements and then stop the profile cleanly at the panel. The rectangular form is matched to the C-channel cross-section described in Schwinn 6K378 documentation, which lets the end cap visually extend the channel lines right to the inside surface where the run stops. When that termination occurs inside a cabinet carcass or at a wall edge, the installer can rely on the 2-7/8 in (73 mm) length to visually cover the end of the channel span, creating a defined end point along the finished surface.
The Schwinn 6K378 C channel end cap set relies on its plastic construction to mirror the C-channel form while remaining easy to work with during installation at cabinet or wall terminations, so each cap can align with the channel edges along that last segment. The configuration as a rectangular set (R & L) means there is a purpose-made left and right cap, which helps the installer align each piece with the direction of the channel run and keep the outer visible face properly oriented when the channel meets an inside cabinet side or adjacent wall. The dark bronze designation matches one of the finish options described for the C-channel family, so when a dark bronze channel is used, the end cap does not visually break the line at the termination point. The precise 2-7/8 in (73 mm) length gives a predictable coverage distance, which is particularly useful when installers cut the metal C-channel to size and want the end cap to span over the cut area while presenting a consistent, finished look along the edge. The part linkage to Schwinn Hardware 59274 provides a single reference across estimating, ordering, and field work, which supports repeatable results on jobs that standardize on Schwinn 6K378 channels.
The Schwinn 6K378 C cap set gives the C-channel a finished termination where it butts against the inside of a cabinet or wall, covering the cut end so the run stops with a defined edge.
The Schwinn dark bronze C channel end caps are 2-7/8 in (73 mm) long, which provides enough coverage to span the cut end of the channel and present a consistent termination along the cabinet surface.
These plastic end caps are used where the C-channel butts against the inside of a cabinet or wall, so they serve at the termination point of the channel inside that cabinet or along that wall edge.
The left and right rectangular configuration provides a specific cap for each channel end, which helps keep the visible faces oriented and aligned to the direction of the C-channel run.
The dark bronze color lets these caps blend with dark bronze C-channel and matching hardware, so the termination at the cabinet or wall looks continuous with the rest of the installation.
Part number 59274 ties the set directly to Schwinn Hardware documentation, so future projects can reference the same C cap when matching earlier C-channel terminations.
The Schwinn Hardware C cap rectangular set in dark bronze with part number 59274 is built as plastic end caps for C-channel, so each piece is purpose-shaped for terminating a Schwinn channel run against a cabinet interior or wall. The defined 2-7/8 in (73 mm) length and left/right orientation support consistent results every time a C-channel stops at a panel, while the dark bronze color aligns with dark channel and hardware schemes. For projects using Schwinn 6K378 channels that must finish neatly at cabinet sides or walls, this dark bronze C channel end caps set provides a matched, part-numbered solution ready to slot into your standard hardware list.