Schwinn 6K379 Series C cap set is a plastic left and right end cap pair designed to give a C-channel a finished termination where it meets the inside of a cabinet or a wall. The 2-7/8 in (73 mm) length provides a defined edge along the channel, which helps create a consistent visual stop instead of leaving an exposed channel profile. The silver finish is described as matching clear anodized, so it visually aligns with clear anodized C-channel runs in cabinet and wall applications. Because this set is manufactured by Schwinn Hardware as part of the 6K379 Series, it matches the design intent of that channel system, which supports a coordinated look across decorative hardware and moldings. The product is classified under handles and pulls, tying it to cabinet and furniture hardware layouts where C-channels are used as part of the pull design.
This C cap left right for C channel is intended for use where a C-channel ends at an inside cabinet surface or wall, so the geometry is tailored to that termination point. The 2-7/8 in (73 mm) long cap body works along the channel edge, helping the installer visually square the channel end to the cabinet or wall face. Because the caps are plastic, they can cooperate with the metal C-channel while keeping the finished termination distinct from the main channel body. The silver finish, described as matching clear anodized, aligns with commonly used clear anodized C-channels in cabinet handle applications, supporting a consistent look from the channel run through to the capped end.
This Schwinn Hardware C channel cap set is described for use on a C-channel that butts against the inside of a cabinet or a wall, so it is suited to cabinet interiors and wall-adjacent terminations. When a C-channel pull or profile reaches the inside of a cabinet gable or a fixed wall, these plastic end caps provide the finished termination at that junction. The 2-7/8 in (73 mm) length works along the channel rather than just at a point, which helps visually connect the end of the channel to the cabinet or wall surface. Because the silver cap is matched to clear anodized, it coordinates with clear anodized channels commonly specified for modern cabinet handle designs in woodworking projects.
The fact that this is a left and right end cap set means each cap is shaped for its respective side of the C-channel termination, which supports repeatable orientation from cabinet to cabinet. Using matched left and right caps on both ends of a C-channel run lets an installer maintain a mirrored appearance at opposing terminations. The plastic material works with the metal C-channel while keeping the termination piece distinct, which can simplify handling during fitting and alignment. The stated silver finish matching clear anodized helps avoid a color break between channel and cap, supporting consistent visual results along the entire handle or pull run. With the manufacturer part number 59276 tied to the Schwinn 6K379 Series, the caps are aligned with that specific series of decorative hardware, supporting predictable results whenever that system is specified.
The Schwinn 6K379 Series C cap set provides plastic left and right end caps that give a C-channel a finished termination when it meets the inside of a cabinet or a wall.
The Schwinn plastic end caps are 2-7/8 in (73 mm) long, so they run along a section of the C-channel and create a defined, finished edge at the termination point.
These Schwinn C channel caps are silver and are described as matching clear anodized, which aligns them visually with clear anodized C-channel hardware runs.
These C caps are intended for terminations where a C-channel butts against the inside of a cabinet or a wall, finishing that junction in cabinet and wall applications.
The manufacturer part number for this Schwinn 6K379 Series left and right C-channel cap set is 59276, which identifies this specific silver termination pair.
The Schwinn 6K379 C channel caps are described as plastic end caps, providing a non-metal termination piece that works with the metal C-channel profile.
The Schwinn 6K379 Series C cap set in silver offers plastic left and right terminations matched to clear anodized C-channel runs, so cabinet and wall junctions look deliberate rather than abrupt. With a 2-7/8 in (73 mm) length and a design focused on channel ends that butt to cabinet interiors or walls, this set supports consistent results anywhere that channel profile stops against fixed casework. For projects built around the Schwinn 6K379 Series, selecting this 59276 C-channel end cap pair keeps the decorative hardware system visually aligned from run to termination.