Schwinn 6K379 C cap set is a pair of plastic end caps designed to terminate a C-channel at the inside of a cabinet or wall, so an exposed profile turns into a clean finished edge. The 2-7/8 in (73 mm) length gives the termination a defined, consistent look from project to project, which keeps multiple cabinet runs visually aligned. The anodized nickel color creates a nickel-toned finish on the channel end, which ties into other nickel decorative hardware without adding another material. With distinct left and right pieces in one set, each channel end can be treated specifically, so both sides of the run finish in the correct orientation. As part of the Schwinn 6K379 Series from Schwinn Hardware, the set fits into a decorative hardware workflow where channels and caps work together for controlled terminations.
The 2-7/8 in (73 mm) long anodized nickel C cap set works at the point where a C-channel meets the inside of a cabinet or wall, so the visual stop is controlled instead of abrupt. Because the pieces are plastic, the cap-to-surface contact is more forgiving where the channel meets finished cabinet interiors or painted walls. The nickel color aligns with other nickel decorative hardware in the run, which keeps the termination visually tied to pulls and channels rather than looking like a separate component. Left and right parts in one Schwinn 6K379 Series set keep each end of the C-channel identified, so orientation can be matched to the cabinet layout without guesswork.
These plastic end caps from Schwinn Hardware are used wherever a C-channel must finish at the inside of a cabinet or wall, so the exposed channel profile is replaced with a deliberate termination. In cabinet runs, the 2-7/8 in (73 mm) long anodized nickel C cap set can be positioned at the end of horizontal or vertical channels that align with interior cabinet panels, allowing the channel to visually stop against casework. When channels continue into corner conditions, the left and right caps help each side terminate toward its adjacent panel, so both ends respect the cabinet geometry. Because the caps are part of the decorative hardware and moldings category, they sit naturally alongside handles and pulls to keep the overall hardware story consistent from channel start to channel end.
The defined 2-7/8 in (73 mm) length on the Schwinn 6K379 C cap set gives installers a fixed dimension to work with, which helps repeat the same reveal and termination size on multiple cabinets in a job. The anodized nickel color means the channel termination reads as a nickel-toned element, aligning with nickel pulls and channels so the end of the run does not visually break from the rest of the hardware. Because the caps are plastic, the interface where the channel meets an inside cabinet surface or wall is less harsh, which supports consistent contact along varying surface finishes. Having distinct left and right pieces under manufacturer part 59277 keeps orientation organized, so channel ends on mirrored cabinet runs can be terminated in a predictable, repeatable way using the same Schwinn hardware reference across projects.
The Schwinn 6K379 C cap set provides plastic end caps that give a C-channel a finished termination when it butts against the inside of a cabinet or wall, so exposed channel ends present a clean edge.
The anodized nickel C cap set is 2-7/8 in (73 mm) long, which offers a defined termination length that can be repeated across multiple cabinet or wall intersections for consistent results.
These plastic end caps are used where a C-channel run finishes at the inside of a cabinet or wall, turning the open end of the channel into a deliberate, finished termination within the casework.
The anodized nickel color aligns the C-channel termination with nickel-toned decorative hardware, so the channel ends visually match other handles and pulls in the installation.
The presence of left and right pieces lets each end of the C-channel match its side, which supports mirrored cabinet layouts and consistent terminations on opposing runs.
These channel end caps are produced by Schwinn Hardware under manufacturer part number 59277 as part of the Schwinn 6K379 Series.
The Schwinn 6K379 Series 2-7/8 in (73 mm) long anodized nickel C cap set from Schwinn Hardware ties C-channel terminations into a controlled, finished detail at the inside of cabinets or walls. Plastic construction supports a contact-friendly interface where the channel meets casework, while the nickel tone works alongside other decorative hardware and moldings. With distinct left and right pieces under part 59277, the set supports organized, repeatable terminations on single and mirrored cabinet runs. For cabinet projects that use C-channels and call for clean, nickel-colored ends at interior panels, this C cap set aligns the visual stop of each channel with the rest of the hardware story.