Schwinn 6K379 C cap set is a black plastic left and right end cap pair designed for the Schwinn C-channel, so the open channel terminates cleanly when it meets the inside of a cabinet or a wall. The C-cap shape matches the C-channel profile, which closes off the exposed end and creates a defined stop point at the cabinet side. Because the set is molded in black, it visually ties in with black channel setups and other dark decorative hardware on the project. The matched left and right pieces are formed as a pair, so each side of the channel end is finished consistently. As a Schwinn Hardware component, this cap set is part of the 6K379 series system, helping keep the overall decorative hardware run visually uniform from end to end.
This C-cap left and right set is made for the Schwinn C-channel profile, so the parts align with the channel geometry where the run stops at an inside cabinet panel or a wall. When the C-channel is cut to length and positioned, the caps provide the end termination that interfaces with the vertical surface. The fact that these end caps are used when butting up against the inside of a cabinet or wall means they are intended for interior furniture and cabinet environments. The black finish ties into black channels and matching dark handles and pulls, helping the termination read as part of the same decorative hardware layout.
These plastic end caps are used specifically on Schwinn C-channel runs at the point where the profile meets the inside of a cabinet or a wall, so they provide a visual and functional end stop in that location. In decorative hardware and moldings work, this termination is important because the C-channel sits alongside handles and pulls, and the open end otherwise exposes the channel interior. By matching the C-channel shape, the Schwinn 6K379 C cap set closes that opening and defines the edge where the hardware system meets cabinetry or adjacent structures. Because the caps are part of Schwinn Hardware decorative hardware and moldings, they fit into cabinet, furniture, or interior millwork projects that already use Schwinn C-channel solutions.
The black C cap set is molded to work with the Schwinn C-channel, so once the channel length is established, installers can rely on the caps to finish each end against cabinet sides or walls in a repeatable way. Having a matched right and left piece in the Schwinn 6K379 series means each side of the termination uses a dedicated shape, which keeps the visual line of the channel and adjacent handles and pulls consistent from one project to the next. The plastic material is stable in typical interior cabinet conditions, so it maintains the defined termination where the channel meets the cabinet interior or wall surface. The ability to download installation drawings and templates from the Schwinn site supports consistent planning of the C-channel and cap interface within a decorative hardware layout.
The Schwinn 6K379 C cap set is used to give a Schwinn C-channel a finished termination when the channel butts against the inside of a cabinet or a wall.
The black C cap set closes the open end of the C-channel, creating a clean edge where the profile meets cabinet interiors or walls in decorative hardware runs.
These plastic end caps are typically installed on Schwinn C-channel runs at the point where the channel meets the inside of a cabinet or a wall.
The C cap set has left and right pieces so each side of the C-channel termination is shaped to match its position, giving the finished end a balanced appearance.
The black color lets the C cap blend with dark C-channel runs and other black decorative hardware, helping the channel termination look integrated in the cabinet design.
Installation drawings and templates for this C cap set are available from Schwinn through their online installation drawings and templates resource.
The Schwinn 6K379 C cap set in black gives the Schwinn C-channel a clear termination where it meets an inside cabinet panel or wall, which helps finish decorative hardware runs cleanly. Using the matched left and right plastic caps on the channel ends keeps the edge where the channel profile stops aligned with the rest of the Schwinn Hardware layout. For projects that rely on C-channel hardware in black, this set supports a consistent end detail that fits the look of the surrounding handles and pulls.