Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Schwinn 6K400 dark bronze C-channel outer corner is a plastic corner piece designed for Schwinn Hardware aluminum C-channels on handles and pulls. The 1-1/8 in (29 mm) wide design works with matching channels so you can create a clean finished outer corner on decorative hardware runs. Because the piece is shaped for channel ends, you cut the aluminum profile straight and slide the ends into the corner instead of cutting complex angles. That layout keeps cuts simple on site while delivering a neat, continuous look at the corner. The dark bronze color coordinates with dark bronze channels in the Schwinn Hardware system, so corner transitions blend visually with the rest of the decorative hardware.
This outer corner for ALU C-channels is shaped so two aluminum channel lengths seat into the plastic body, forming the outer turn in a handle or pull layout. Because the system expects straight-cut channel ends, installers can work with simple crosscuts instead of miter setups when building corner details. The 1-1/8 in (29 mm) width ties the corner directly to the Schwinn 6K400 Series channel size, helping the C-channel walls line up with the corner piece. That match supports a smooth-feeling transition for hands moving around the outer corner on a handle or pull. The downloadable installation drawings provide dimensional and layout guidance, which supports consistent corner execution across multiple pieces in a project.
This dark bronze C-channel outer corner is part of the Schwinn Hardware 6K400 Series used in decorative hardware and moldings for handles and pulls. The corner piece connects two aluminum C-channels at an outer corner, so it suits cabinet, furniture, or fixture runs that turn outward at 90 degrees. Because the piece is sized at 1-1/8 in (29 mm) wide, it fits layouts built around the matching Schwinn 6K400 profile. The dark bronze color supports projects using dark bronze channels from the same system, allowing handle or pull lines to wrap around an outside corner without a visible break in finish. In multi-cabinet installations, these corners help carry the same C-channel detail around exposed ends or projecting sections.
The Schwinn 6K400 C-channel corner relies on straight channel cuts, which keeps fabrication repeatable when many outer corners are needed on a job. Installers cut each aluminum C-channel piece square, then seat the ends into the plastic corner piece to form the turn. That approach reduces layout steps compared with mitering both the inner and outer walls of the channel, which can be sensitive to small measurement errors. The matched 1-1/8 in (29 mm) width ties directly to the 6K400 Series, helping the corner and channel share the same proportions so alignment is visual rather than trial-and-error. Because the system is supported by downloadable installation drawings, project teams can reference consistent dimensions and corner geometry from the Schwinn source when planning cuts and positions.
The Schwinn 59290 piece is a plastic outer corner for aluminum C-channels in the 6K400 Series, creating a finished outer turn in decorative handle and pull channel runs.
The C-channel outer corner is designed for straight-cut channel ends, so installers cut profiles square and insert them into the corner instead of setting up and cutting precise miters.
The Schwinn 6K400 corner matches 1-1/8 in (29 mm) wide C-channels, helping the corner profile align with the aluminum channel for a uniform appearance.
The dark bronze version coordinates with dark bronze Schwinn C-channels, helping the outer corner visually blend into dark bronze handle or pull runs on cabinets or furniture.
This corner piece is part of the Schwinn Hardware 6K400 Series C-channel system, so it supports consistent decorative hardware details within that product family.
Installation drawings for this corner are available at the Schwinn website link provided, giving layout and dimensional information for planning cuts and placements.
The Schwinn 6K400 dark bronze C-channel outer corner provides a straight-cut solution for turning aluminum C-channels around an outer corner while maintaining a unified appearance. The 1-1/8 in (29 mm) width aligns with the 6K400 Series profile, keeping transitions tight and visually consistent. Plastic construction pairs with aluminum C-channels to complete the corner without changing hardware families mid-run. For projects built around dark bronze Schwinn C-channels on handles and pulls, this corner lets you carry that same line through every exposed outer corner for a continuous decorative hardware detail.