Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Schwinn Z078 recessed pull sits set into the door or drawer front rather than projecting from it, keeping the hardware plane-flush with the cabinetry for a clean, handle-free look that reads as contemporary millwork rather than applied hardware.
Unlike a surface-mounted bar pull that fastens through two drilled holes, a recessed pull requires a machined pocket routed into the door or drawer front. The pull drops into that opening, and two mounting screws secure it from the back. The result is a grip that sits within the face of the front rather than standing away from it. On this pull the routed pocket needs to accommodate the 4-3/16 inch overall length and allow the 11/16 inch depth of the pull body to seat fully. The two mounting holes land on 3-3/4 inch centers, the same standard spacing found across a wide range of cabinet programs, which simplifies integration into an existing layout when the pocket is cut to match.
The pull is cast in zamak, a zinc-aluminum alloy common in quality hardware for its dimensional consistency and ability to hold a crisp edge on a rectangular form. The Matte Black finish is a low-sheen surface that diffuses light evenly across the flat face of the pull rather than picking up a reflection. In a routed pocket where the pull is partly shadowed by the surrounding front, a matte surface reads more evenly than a polished one, which is a practical match for this mounting method as much as a style choice.
This pull is suited to contemporary kitchens, baths, and built-ins where the design intent is a flat, uninterrupted cabinet face. It is the hardware of choice on full-overlay slab doors and flat-panel fronts where a projecting pull would break the surface geometry the rest of the design is built on. It also works in tight clearance situations, such as a drawer stack where a projecting pull on a lower drawer would interfere with the front above it. Because the Z078 series carries a straightforward rectangular form, it integrates into both high-gloss lacquered cabinetry and matte-finish painted fronts without competing with the surface.
The pull body is 4-3/16 inches long, and the pocket depth needs to accommodate the 11/16 inch projection of the pull within the front's thickness. Confirm the pocket width and depth against the pull's full dimensions before routing.
Yes. The 3-3/4 inch spacing is a single standard and appears in catalog data as both 95 mm and 96 mm depending on how the manufacturer rounded the conversion. Both refer to the same hole pattern.
Yes. A recessed pull works on both doors and drawers as long as the front is thick enough to accept the routed pocket without breaking through the back face.
A matte surface diffuses light and is generally more forgiving of fingerprints and smudges than a polished finish of the same color.
Choose this pull when the cabinetry design calls for a grip that integrates into the front rather than one that stands away from it, and when a matte black finish is the right match for the room's existing hardware palette.