Choose a Rev-A-Shelf tray organizer

Rev-A-Shelf tray organizer gives you a simple way to separate baking sheets, platters, and similar items inside a cabinet. The Rev-A-Shelf 597 Series tray divider is a metal tray divider made in a chrome finish and offered here in a 12 inch height. This cabinet tray divider is a single-piece divider that mounts with four screw-on clips per divider, and the screws and clips are included. Buyers searching for RS597-12CR-52, a tray divider with clips, or a base cabinet organizer often want a divider that is direct to mount and easy to plan into a cabinet interior. This rev a shelf divider is intended for cabinet organization where vertical separation matters and where a chrome look fits the rest of the hardware inside the cabinet.

See how this cabinet tray divider helps

• Rev-A-Shelf 597 Series design - Helps buyers match this divider to other verified 597 Series tray divider layouts and reorder with confidence.
• Chrome finish - Gives the metal tray divider a clean appearance that suits cabinet interiors where visible hardware finish matters.
• 12 inch height - Helps you plan divider spacing for trays and similar items when a shorter divider height fits the cabinet interior.
• Single-piece divider - Simplifies handling during layout and installation because each divider is one complete unit.
• Four screw-on clips per divider - Supports direct mounting and gives installers a clear hardware count for each divider location.
• Screws and clips included - Reduces guesswork at install time because the mounting hardware noted in the product data comes with the divider.
• Metal tray divider construction - Provides a rigid divider format for organizing upright trays, platters, and boards inside cabinetry.
• Single units sold in any quantity - Helps buyers order the exact number of dividers needed instead of planning around a full bulk carton.

Confirm cabinet tray divider fit and contents

Key specs to confirm: This chrome tray divider is a Rev-A-Shelf 597 Series metal tray divider with a 12 inch height. Before ordering, confirm the cabinet interior height, the spacing you want between dividers, and the mounting surface where the four screw-on clips will attach. Because this product data identifies the divider as a single-piece unit with clip mounting, buyers should also confirm whether the cabinet layout allows the divider to be placed where trays can slide in and out cleanly. Load limits, compliance details, and any unlisted dimensions should be confirmed with the manufacturer or technical documentation.

What's included: One Rev-A-Shelf 597 Series tray divider, four screw-on clips per divider, and screws and clips as included mounting hardware.

What to verify before ordering: Confirm cabinet opening and interior height, desired divider count, spacing between each cabinet tray divider, mounting surface suitability for screw-on clips, and whether a 12 inch divider height is the right choice for the trays, platters, or boards you plan to store.

Compare metal tray divider use and install

Use a metal tray divider for trays

A metal tray divider is often chosen when a cabinet becomes cluttered with baking sheets, serving platters, cutting boards, or flat pans that do not stack neatly. In many kitchens, these items end up leaning against one another, which makes access slower and can create a messy cabinet interior. The Rev-A-Shelf 597 Series tray divider addresses that problem by creating individual vertical slots inside the cabinet. Because this product is a single-piece divider, the layout is straightforward to visualize before you mount it. Because it uses four screw-on clips per divider, the installer can place each divider according to the storage pattern needed for the cabinet.

This specific Rev-A-Shelf tray organizer is the chrome 12 inch version, identified as RS597-12CR-52. That makes it useful when you want a shorter divider height than an 18 inch option in the same series. A buyer comparing RS597-12 and RS597-18 family references should confirm which height works with the cabinet interior and with the items being stored. If your trays are tall or the cabinet has unusual proportions, confirm the divider height and spacing before drilling. If your cabinet is being used as a base cabinet organizer, also check that the divider placement will not interfere with adjacent hardware, shelves, or pull-out components.

Installers and serious DIY buyers usually value products that state the mounting method clearly. Here, the verified product data confirms a tray divider with clips and included screws. That helps reduce uncertainty during planning. The divider is also sold as a single unit in any quantity, which is useful for custom cabinet layouts where you may need only a few dividers rather than a full box. For revashelf or rev a shelf buyers who already know the 597 line, that makes this product practical for both new cabinet organization and matching an existing setup.

Compare cabinet tray divider install options

When buyers compare cabinet tray divider products in general, the main differences usually come down to finish, height, mounting approach, and whether hardware is included. This Rev-A-Shelf 597 Series tray divider gives you several verified details up front: it is metal, it has a chrome finish, it is 12 inches high, and it mounts using four screw-on clips per divider. Those facts matter because they help you evaluate fit without guessing at the basic installation method.

Another point buyers often compare is whether a divider arrives as separate parts or as one formed piece. This Rev-A-Shelf 597 Series tray divider is a single-piece divider. That can make planning easier because you are positioning a complete divider rather than assembling multiple divider parts first. Included screws and clips also help installers confirm what comes with the product before the cabinet work begins.

For buyers reviewing similar product types, a generic alternative may require extra verification on finish, included hardware, or mounting style. By contrast, the verified data for this cabinet tray divider clearly identifies the finish, height, and clip-based mounting method. That clarity supports consistent ordering, especially when matching an existing cabinet layout or replacing a divider in a current Rev-A-Shelf setup. If your project depends on exact width, spacing, or load details, those items are not listed here and should be confirmed through manufacturer documentation before final purchase.

Check cabinet tray divider ordering questions

Order a chrome tray divider with confidence

chrome tray divider selection is easier when the core facts are clear. This Rev-A-Shelf tray organizer is a 12 inch high, single-piece metal divider in chrome, and it mounts with four screw-on clips per divider. Screws and clips are included, but you should still confirm cabinet interior height, divider spacing, and mounting surface suitability before purchase. If you are matching an existing rev a shelf layout or ordering by RS597-12CR-52, verify the quantity needed for your cabinet plan.