Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf K-Cup drawer insert is a solid wood drawer insert made to hold 30 K-Cups in a kitchen cabinet drawer. This Rev-A-Shelf drawer insert is part of the 4SDI Series and is listed at 16 inches wide, 19-3/4 inches deep, and 2-3/8 inches high. The product name identifies maple construction, and the web description confirms solid wood construction for a durable coffee storage layout. Buyers looking for a 16 inch K-Cup drawer insert or a trim-to-fit drawer insert for an 18 inch cabinet should note that this model is packaged and sold as shown and that the minimum cabinet opening height is 4-1/2 inches. This drawer insert for K-Cups helps keep single-serve coffee pods organized inside a drawer instead of loose on a countertop.
Key specs to confirm: This wood K-Cup drawer insert is listed at 16 inches wide, 19-3/4 inches deep, and 2-3/8 inches high, with a minimum cabinet opening height of 4-1/2 inches. Buyers should confirm the actual inside drawer dimensions, drawer opening clearance, and cabinet size before ordering. The web description states trim-to-fit is available for 18 inch and 24 inch cabinets, so verify how that applies to your specific drawer and whether trimming is needed for your installation. If you need load, compliance, or other technical details, those are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified information shows the product is packaged and sold as shown below, and the item is a Rev-A-Shelf maple K-Cup drawer insert. If you need hardware or additional components, confirm included items before purchase.
What to verify before ordering: Check drawer interior width and depth, opening height, cabinet size, trim-to-fit needs, and whether your drawer layout will accommodate 30 K-Cups without interfering with drawer operation. Follow manufacturer installation guidance and local building requirements where applicable.
A drawer insert for K-Cups is usually chosen by buyers who want coffee pods organized inside a drawer instead of spread across a counter or mixed loosely with utensils. In a busy kitchen, that matters because single-serve pods can shift around, take up prep space, and make it harder to see what blends are in stock. This Rev-A-Shelf K-Cup drawer insert addresses that use case with a dedicated layout that holds 30 K-Cups and fits within a drawer-based storage plan.
The product data identifies this item as a maple K-Cup drawer insert in the Rev-A-Shelf 4SDI Series. That matters for buyers who prefer a wood insert over plastic trays or open bins. The listed size of 16 inches wide by 19-3/4 inches deep by 2-3/8 inches high gives a starting point for checking drawer fit, while the minimum cabinet opening height of 4-1/2 inches gives another important clearance point before ordering. If you are shopping for a 16 inch K-Cup drawer insert, those dimensions help narrow the fit question quickly.
This product can also suit remodel work or cabinet upgrades where the goal is to add organized coffee storage without changing the room layout. The web description notes trim-to-fit availability for 18 inch and 24 inch cabinets, which can be useful when the drawer opening does not match a stock insert exactly. Because trim-to-fit details are not fully described in the verified data, buyers should confirm how much adjustment is allowed and whether any site modification is expected. That extra check helps avoid ordering a K-Cup organizer insert that needs more clearance than the drawer can provide.
For installers and serious DIY buyers, the main pain point is usually not the idea of pod storage but the fit inside the actual drawer box. Measure the usable inside dimensions, not just the cabinet face size. Also confirm that the drawer opens fully and that nearby hardware or internal obstructions will not interfere with access to the pods. When those basics line up, a wood K-Cup drawer insert can create a cleaner and more repeatable coffee storage setup.
When buyers compare this product type to basic coffee pod organizers, the main differences are material, intended placement, and fit planning. This Rev-A-Shelf drawer insert is described as solid wood and identified as a maple insert, so it is aimed at built-in drawer organization rather than countertop storage. That makes it a better match for buyers who want pods stored inside cabinetry and who are already planning around drawer dimensions.
Another difference is that this product gives verified dimensional information. The 16 inch width, 19-3/4 inch depth, and 2-3/8 inch height help buyers evaluate the insert against the drawer interior before purchase. The minimum cabinet opening height of 4-1/2 inches is also a useful filter. Generic organizers often require the buyer to work backward from a loose description, while this product provides a clearer fit starting point. Still, because cabinet construction varies, the final fit should always be confirmed on site.
The Rev-A-Shelf brand and 4SDI Series identification also help with consistency in product lookup, reorder planning, and matching related cabinet organization items. For trade buyers, that can simplify specification and purchasing records. For homeowners, it helps ensure the item being compared is a cabinet drawer insert for K-Cups rather than a countertop rack or a general tray. If your goal is concealed coffee pod storage in a drawer, this product type is designed for that purpose. If you need exact trim details, installation method, or included hardware, confirm those points before ordering because they are not fully detailed in the verified product data.
Rev-A-Shelf K-Cup drawer insert holds 30 K-Cups in a drawer-based storage layout.
This drawer insert is listed at 16 inches wide, 19-3/4 inches deep, and 2-3/8 inches high.
This K-Cup drawer insert requires a minimum cabinet opening height of 4-1/2 inches according to the product description.
This Rev-A-Shelf drawer insert is described as solid wood construction, and the product name identifies maple.
The product description states trim-to-fit is available for 18 inch and 24 inch cabinets, but exact trim details should be confirmed before purchase.
This drawer insert should be matched to the usable inside drawer space and opening clearance, not just the cabinet face size.
The verified listing says the product is packaged and sold as shown, so buyers should confirm included components before ordering.
Installation hardware is not specified in the verified data, so hardware details should be confirmed with the seller or manufacturer documentation.
This drawer insert should be checked for drawer width, depth, opening height, and any trim-to-fit requirement before installation. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf drawer insert is a practical choice for buyers who want 30 K-Cups stored inside a cabinet drawer instead of on the counter. Before ordering, confirm the listed 16 inch by 19-3/4 inch by 2-3/8 inch size, the 4-1/2 inch minimum cabinet opening height, and whether trim-to-fit details match your cabinet plan. Included components are only verified as packaged and sold as shown, so check that point if your project depends on hardware or added parts. A quick fit review helps ensure this maple K-Cup drawer insert matches your drawer and cabinet layout.
Sold In: 1 Each
