Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series bar pull 3 inch gives cabinets and furniture a straight, simple handle in a familiar bar style, so doors and drawers can be opened with a full grip. The pull uses a 3 inch (76 mm) center to center hole spacing, which lines up with many standard drilling patterns in cabinet work. Its steel construction provides a solid feel under hand, helping doors and drawer fronts move smoothly when pulled. The satin nickel finish adds a muted metallic look, which helps hardware blend with many contemporary and transitional projects. A 4-9/16 inch overall length leaves finger space beyond the 3 inch mounting points, so hands clear the cabinet face during use. The 1-1/4 inch projection sets the bar out from the surface, creating room for fingers to wrap around. A 1/2 inch width keeps the profile narrow across the front, so the pull sits visually light while still offering enough surface for a stable grip.
The 3 inch center to center measurement defines the drilling distance for this bar pull, guiding where to bore the two mounting holes on a door or drawer front. With a 4-9/16 inch overall length, the pull extends beyond those points, offering extra leverage as users grasp the ends. The 1-1/4 inch projection sets the standoff from the surface, which influences finger room and clearance around door frames or adjacent fronts. A 1/2 inch width controls how much visual space the pull occupies across the face, which can matter when lining up multiple pulls in a row. These dimensions work together so installers can plan hole locations, spacing between fronts, and visual alignment before drilling and mounting during cabinet or furniture projects.
This 4-9/16 inch long bar pull spans a useful section of a door or drawer, so users can grip near the center or closer to an edge depending on reach and layout. With 3 inch center to center mounting, the pull anchors through two points in the front, balancing the load as drawers or doors are opened. The 1-1/4 inch projection sets the bar outward, which helps fingers wrap fully around the steel without rubbing against the surface, useful on frequently used kitchen or shop cabinets. A 1/2 inch width keeps the bar visually streamlined, which can help rows of handles look aligned without appearing bulky on narrower fronts. The satin nickel finish provides a softened metallic tone, which fits projects where a brushed look is preferred over a bright, highly reflective metal appearance. In everyday cabinet use, this combination of size, spacing, and finish offers a straightforward, functional grip for doors and drawers.
The steel construction of this bar pull offers a firm feel when pulling heavier drawers or solid cabinet doors, which supports repeatable opening and closing over time. Using a standard 3 inch center to center hole spacing can streamline layout on jigs or templates, since many shop setups reference this common dimension. The 4-9/16 inch overall length provides extra bar at each end beyond the mounting points, giving installers some flexibility in visual placement on different door and drawer sizes. With a 1-1/4 inch projection, planners can account for clearance around adjacent fronts and walls, helping doors open without the handle contacting nearby surfaces. The 1/2 inch width keeps the hardware footprint modest across the face, which can be useful where multiple pulls are aligned closely on stacked drawers. Together, these details help support consistent alignment and handling across a full run of cabinetry using the same SZBAR3-SN bar pull.
The bar pull has a 3 inch center to center spacing, 4-9/16 inch overall length, 1-1/4 inch projection, and 1/2 inch width, which together define drilling locations, clearance, and visual scale on the front.
The 3 inch center to center spacing matches a widely used drilling distance, allowing this pull to work with many layout jigs and common cabinet hole patterns during installation or changeouts.
The Pro Value Series bar pull uses steel construction, giving the handle a rigid structure that supports repeated pulling on cabinet doors and drawers in regular use.
The SZBAR3-SN bar pull has a satin nickel finish, which provides a soft metallic look suitable for many contemporary cabinet and furniture projects.
The bar pull projects 1-1/4 inch from the mounting surface, setting the bar out enough to give finger clearance between the hand and the cabinet face when pulling.
This handle is part of the Pro Value Series Bar Pull collection and carries manufacturer part number SZBAR3-SN, which identifies this specific satin nickel, 3 inch center to center model.
The Pro Value Series bar pull 3 inch center to center design lines up with a common cabinet drilling standard, supporting straightforward layouts on doors and drawers. Its steel construction, satin nickel finish, and defined dimensions give installers clear parameters for planning hole locations and clearances. For projects built around 3 inch spacing using satin nickel metalwork, this SZBAR3-SN bar pull provides a consistent handle option across a full run of cabinets and furniture fronts.
Sold In: 1 Each