Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Steel Series bar pull is a steel cabinet handle designed with a 96 mm center to center mounting span, which spaces the two screw holes precisely for consistent layouts on drawers and doors. The satin nickel finish covers the pull with a uniform metallic look that visually matches common satin nickel hinges and latches on built-ins. Overall length of 5-3/8 inches gives this pull enough hand clearance across wider drawer fronts without crowding the panel edges. A projection of 1-1/4 inches sets the grip away from the surface, creating reliable finger space while keeping the handle close enough for tight walkways. The 1/2 inch width provides a slim bar profile that looks clean on modern cabinets and keeps drilling centered along a narrow footprint for straightforward installation work.
The 96 mm center to center measurement defines where the mounting holes align, so drill points can be laid out with metric precision across a run of cabinets. The 8-32 x 1 inch screw size sets the thread and length used with this pull, which matches a common cabinet hardware standard for fastening into typical door and drawer thicknesses. With a 5-3/8 inch overall length and 1/2 inch width, hole placement and edge clearances can be planned to keep the pull centered while leaving consistent margins to stiles and rails. The 1-1/4 inch projection defines how far the bar stands off the surface, which is useful when coordinating with adjacent doors or obstacles so the handle clears neighboring components.
This bar pull, identified by manufacturer part number SZBAR96-SN, belongs to the Bar Pull collection, which positions it for use wherever a straight, modern handle is preferred on cabinets. Its 96 mm center to center spacing aligns with a common metric standard, so layouts for kitchen, bath, or shop cabinetry can repeat the same drilling pattern from one opening to the next. Being part of the Pro Value Series and categorized under decorative handles and pulls, it fits projects that call for functional cabinet hardware with a straightforward bar form. The satin nickel finish allows it to sit well alongside other satin nickel components in a room, so door and drawer fronts can share a unified hardware appearance. The steel material makes this handle suited to doors and drawers that see regular opening and closing in day-to-day use.
The 5-3/8 inch overall length gives this pull a predictable footprint, so installers can center it reliably on typical residential drawers without guessing overhang or balance. With a projection of 1-1/4 inches, the handle stands off enough to grasp even when mounted above thicker drawer fronts, which can reduce fumbling when opening loaded drawers. The 1/2 inch width keeps the bar slim, which helps align multiple pulls in straight visual lines when used on stacked drawer banks. The 96 mm center to center distance lets jigs or templates be built around a single measurement, speeding layout across a large run of cabinets. Using the 8-32 x 1 inch screw interface ties this pull to a widely used fastener size in cabinet construction, so fastening depth and thread engagement are predictable across standard doors and drawers.
The bar pull has a 5-3/8 inch overall length, 96 mm center to center spacing, 1-1/4 inch projection, and 1/2 inch width, which together define its footprint and grip clearance on cabinet fronts.
The Pro Value Steel Series bar pull is made from steel, which gives the handle a solid metal feel during regular cabinet door and drawer operation.
The satin nickel finish provides a muted metallic look, which helps this pull visually coordinate with other satin nickel decorative hardware on the same installation.
This bar pull uses a 96 mm center to center mounting measurement, which sets the distance between the two screw holes for consistent drilling.
The pull is specified for use with 8-32 x 1 inch screws, which aligns with a common cabinet hardware thread and length for securing into standard doors and drawers.
Manufacturer part number SZBAR96-SN identifies this specific 96 mm center to center satin nickel steel bar pull within the Bar Pull collection and Pro Value Series line.
The Pro Value Steel Series bar pull pairs a steel body with a satin nickel finish, 96 mm center to center spacing, and 5-3/8 inch overall length, giving you defined dimensions to plan hole locations and visual alignment. With 1-1/4 inch projection and 1/2 inch width, the handle provides consistent clearance and a slim profile across doors and drawers. Using the specified 8-32 x 1 inch screw interface, this pull fits into common cabinet construction practices. For projects built around satin nickel hardware and metric-centered layouts, this SZBAR96-SN bar pull offers a straightforward fit for repeatable cabinet work.
Sold In: 1 Each