Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series bar pull in satin nickel is a steel handle designed to give cabinets a straight, modern grip that suits many decorative hardware layouts. The 5-1/16 inch (128 mm) center to center mounting spreads the load across the door or drawer front, which helps keep alignment consistent across a run of cabinets. The bar pull length of 7-3/8 inches provides a generous handhold, useful on wider drawers where users grab from different spots. A projection of 1-1/4 inches stands the handle off the front enough for comfortable fingers to clear the surface, supporting everyday use without knuckle contact. The 1/2 inch width gives the pull a solid feel while staying visually streamlined. The satin nickel finish tones down reflection compared with polished metal, which suits work areas where glare control matters. This pull sits in the Decorative Hardware & Moldings category, so it supports visible, finished cabinet work.
The 128 mm center to center dimension defines the hole spacing for this Pro Value Series bar pull, which lets installers align it with common metric drilling jigs on cabinet jobs. Using the 5-1/16 inch reference also fits imperial tape layout, which helps when cabinets are measured in inches on site. The 7-3/8 inch overall length means the bar extends past the mounting posts, which affects how close it can sit to adjacent hardware or wall surfaces. With a projection of 1-1/4 inches, the handle stands out far enough that door edge profiles or applied trims typically clear the users hand while pulling. The 1/2 inch width concentrates the users grip on a defined edge, which aids consistent feel across a bank of doors. The satin nickel finish over steel gives a uniform surface, which supports a clean visual line when several pulls are installed in a row.
This Pro Value Series bar pull sits in the Decorative Hardware & Moldings Handles and Pulls category, so it suits visible cabinet fronts in kitchens, baths, and shop storage where a straight bar design is preferred. The satin nickel finish coordinates with many hinges and other satin nickel decorative parts, which simplifies matching across a project that already uses that finish family. The 7-3/8 inch bar length works well on medium to large cabinet doors and drawers where a small knob would feel undersized. The 5-1/16 inch (128 mm) center to center spacing aligns with a common metric standard, which helps when replacing other 128 mm cabinet pulls without altering the drilling pattern. The steel construction supports use on heavier drawers or tall pantry doors, where a rigid handle is valuable during repeated pulls.
The 128 mm center to center measurement allows installers to rely on fixed drilling jigs, which speeds up repetitive boring on multi-cabinet runs and helps keep hardware lines straight. Using the 5-1/16 inch imperial equivalent on layout drawings ties the pull directly into inch-based cabinet plans, which reduces conversion steps during field work. The 1-1/4 inch projection creates a consistent stand-off from the door face, which helps installers predict clearance around neighboring doors or adjacent walls when planning handle placement. The 1/2 inch width keeps the grip compact, which is useful when aligning several pulls on narrow rails or near glass inserts. Because the pull length is 7-3/8 inches, installers can visually balance it on wider fronts, which supports more even sight lines across drawer stacks and tall door pairs.
This Pro Value Series bar pull has a 128 mm center to center mounting distance, which sets the hole spacing installers use when drilling cabinet doors or drawers.
The SZBAR128-SN bar pull measures 7-3/8 inches in overall length, which gives a wider gripping area than the mounting distance alone suggests.
This satin nickel bar pull has a 1-1/4 inch projection, which sets the handle away from the cabinet surface for finger clearance during use.
The Pro Value Series bar pull is made of steel, which provides a rigid handle body for frequently used cabinet doors and drawers.
This cabinet bar pull has a satin nickel finish, which offers a subdued metallic appearance suitable for many decorative hardware schemes.
This steel cabinet pull has a 1/2 inch width, which creates a defined gripping edge while retaining a streamlined bar profile.
The Pro Value Series bar pull SZBAR128-SN combines a 128 mm center to center layout with steel construction and a satin nickel finish, which suits many cabinet runs using metric drilling patterns. The 7-3/8 inch length, 1-1/4 inch projection, and 1/2 inch width create a practical, repeatable grip profile across doors and drawers. For projects using decorative handles and pulls in satin nickel, this bar pull provides a consistent, straight-bar look that aligns with modern cabinet designs.
Sold In: 1 Each