Pro Value Series bar pull 3 inch center to center gives cabinets a straight, modern grip that aligns with a standard 3 inch drilling pattern, so handles can be laid out consistently across doors and drawers in the same run. The polished chrome finish on this pull reflects light cleanly, which helps new or remodeled casework present a crisp, finished look on the job. Its steel construction creates a solid feel under hand during opening and closing, which supports repeat use in busy cabinet areas. The 4-9/16 inch overall length spans slightly wider than the 3 inch mounting holes, so the bar visually balances on most cabinet faces without crowding surrounding edges. A 1-1/4 inch projection stands the handle off the face of the cabinet, giving fingers space to get behind the pull while keeping the grip close enough to the door to avoid catching on clothing. The 1/2 inch width provides a defined bar profile that is easy to grasp.
The 3 inch center to center measurement on this Pro Value Series bar pull fixes the mounting holes at a standard spacing, which speeds drilling when using common cabinet hardware templates. Its 4-9/16 inch overall length gives a visible reference when aligning the pull along rail profiles, so installers can position handles consistently from edge details. The 1-1/4 inch projection creates a set standoff from the door or drawer front, so the installed hardware clears typical edge profiles and light reveals. With a 1/2 inch width, the bar presents a clear, straight gripping edge that aligns square to the fasteners, which supports accurate alignment during final tightening. The steel construction ties the mounting points together rigidly, so the handle seats flush as fasteners are tightened into the cabinet front.
This Pro Value Series bar pull from the Bar Pull collection fits projects calling for a 3 inch center to center handle in a polished chrome finish, so it suits cabinets designed around that specific drilling pattern and look. The 4-9/16 inch length makes it a practical choice for many base and wall cabinet doors, as well as smaller drawer fronts, where a straight bar profile matches modern or transitional styles. Its polished chrome surface ties in visually with other polished chrome decorative hardware and moldings in the same room, which helps create a coordinated run of handles and fittings. The steel material supports use on frequently accessed cabinet sections because the rigid bar carries hand force directly into the door or drawer front during everyday opening and closing.
The 3 inch (76 mm) center to center spacing on this bar pull gives installers a fixed dimension that works with standard drilling guides, which helps maintain straight, level rows of handles across multiple cabinet fronts. The 1-1/4 inch projection sets the grip at a consistent distance from the face, helping doors and drawers open without fingers rubbing against the surface. With its 1/2 inch bar width, the pull offers enough surface for a secure grasp while still leaving room on narrow stile or rail areas. The overall 4-9/16 inch length visually balances most cabinet front widths drilled on a 3 inch spread, reducing the chance of hardware looking undersized on the panel. The polished chrome finish coordinates with other polished chrome pulls and knobs, so replacements or additions match the existing decorative hardware appearance on the same job.
This bar pull uses a 3 inch (76 mm) center to center drilling pattern, which sets the hole spacing for doors and drawers that are laid out to accept this handle.
The Pro Value Series bar pull measures 4-9/16 inches in overall length, giving extra bar length beyond the mounting holes for a full hand grip.
This polished chrome bar pull projects 1-1/4 inches from the cabinet surface, creating finger clearance between the door or drawer front and the grip.
The SZBAR3-PC bar pull is made from steel, providing a rigid handle body that feels solid during cabinet door and drawer operation.
This 3 inch cabinet handle has a polished chrome finish, which gives the hardware a bright, reflective appearance on cabinet fronts.
This bar pull is part of the Pro Value Series brand in the Bar Pull collection, aligning with other decorative hardware pieces in that line.
This polished chrome Pro Value Series bar pull with 3 inch center to center spacing and 4-9/16 inch overall length fits work that is laid out for that drilling pattern and look. Its steel construction, 1-1/4 inch projection, and 1/2 inch width provide a defined, comfortable grip on cabinet doors and drawers. For projects using polished chrome decorative hardware and moldings, this SZBAR3-PC bar pull creates a coordinated handle choice that matches both the specified finish and the standard 3 inch layout.
Sold In: 1 Each