FormWood White Oak wood veneer sheet is a rotary cut wood veneer panel designed to bring a white oak face to flat surfaces on woodworking jobs. The sheet measures 48 inches wide by 96 inches long, so it spans typical cabinet sides, door panels, and casework fields without seams in many layouts. The veneer is backed with 10 mil paper, giving the wood face support during handling and bonding while still remaining flexible enough for layup on suitable flat substrates. This sheet is classified as a wood veneer sheet, so it serves as the visible surface layer over a separate core rather than acting as a structural panel by itself. The manufacturer designation WHOPN28RB4A identifies this exact white oak rotary cut veneer configuration, which helps keep repeat orders and panel matching consistent across multiple projects.
This 48 by 96 inch rotary cut white oak wood veneer sheet is sized for panel work, so it lays out efficiently on common cabinet and furniture case dimensions. The 10 mil paper backed construction supports the veneer during trimming around panel edges, which helps when working close to finished dimensions. Because the sheet is classified as a wood veneer sheet, it is intended as the surfacing layer over another substrate, keeping the white oak appearance on the exterior while a separate core carries structural load. The manufacturer part number WHOPN28RB4A clearly identifies this configuration, which assists when aligning multiple sheets on the same project so the same veneer type is used from piece to piece.
This FormWood White Oak wood veneer sheet fits well wherever a white oak face is needed over a flat core panel. The 48 inch width works for many cabinet sides, door fronts, and shelving panels, helping cover visible surfaces with a single continuous sheet. The 96 inch length reaches full-height casework and tall end panels on many installations, so longer parts can be cut from one rotary cut white oak field. As a wood veneer sheet, it suits applications where the appearance layer is critical, such as matching white oak faces across adjacent doors or panels. The rotary cut construction offers a continuous grain pattern across the sheet, which supports visual continuity when ripping multiple parts from the same piece. The 10 mil paper backing supports the veneer face while the sheet is being staged, aligned, and bonded during typical panel processing sequences.
The 10 mil paper backed build on this rotary cut white oak wood veneer sheet provides a stable support layer during cutting, which assists in keeping the face veneer flat as parts are sized. That same paper backing supports the white oak face during press time, helping maintain alignment across the 48 by 96 inch field. Because the sheet is a defined FormWood product, the WHOPN28RB4A identifier can be used to repeat the same veneer selection on future runs, which supports visual consistency across replacement or expansion work. The full sheet dimensions allow multiple doors, drawer fronts, and panel segments to be laid out from a single veneer field, aiding grain sequencing within a project. Using a rotary cut white oak face across the entire sheet helps create a continuous look when parts are kept in order after cutting.
The FormWood WHOPN28RB4A sheet is a rotary cut white oak wood veneer sheet with a 10 mil paper backed construction, so it provides a white oak face over a supporting backing layer.
This white oak wood veneer sheet measures 48 inches wide by 96 inches long, which covers many cabinet, furniture, and panel applications with a single sheet.
The 10 mil paper backing supports the rotary cut white oak face during handling, trimming, and bonding, which helps keep the veneer manageable across the full sheet size.
This FormWood veneer sheet uses white oak as the wood species on the face, providing a white oak appearance wherever the veneer is applied to a panel core.
The 48x96 size allows multiple cabinet sides, doors, or panel parts to be laid out on one sheet, supporting efficient cutting and consistent grain appearance across related pieces.
The FormWood brand and WHOPN28RB4A part number define this specific white oak rotary cut veneer, helping repeat the same appearance across current and future projects.
This FormWood White Oak wood veneer sheet delivers a rotary cut white oak face over a 10 mil paper backed support in a 48 by 96 inch format. Those dimensions suit many cabinet and panel layouts, so one sheet can cover multiple visible parts on a project. The defined WHOPN28RB4A configuration identifies exactly which white oak veneer you are using, supporting consistent results from sheet to sheet. For projects calling for a white oak surfacing layer over a separate core, this wood veneer sheet from Wurth Baer Supply provides a clearly specified option ready to integrate into shop workflows.
Sold In: 1 Each