Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Freud 10 inch general purpose saw blade describes a 10 inch diameter circular saw blade built as a combination blade, so it handles ripping and crosscutting tasks in one setup for shop work where frequent blade changes slow the job. The Freud Tool LU84M011 design uses one flat tooth for ripping followed by four alternate top bevel teeth for crosscutting, giving a balanced cut pattern that supports smooth cuts in both directions of grain. A large gullet in front of each flat top raker clears chips quickly, which helps maintain feed speed and keeps the cut path open during longer rips. The blade is part of the circular saw blades class, so it is suited to table saw and similar stationary saw applications that take a 10 inch blade. A 5/8 inch arbor interfaces with common saw arbors in woodworking shops.
The LU84M011 uses a 5/8 inch arbor, so it seats directly on saws drilled for that arbor size without bushings, which simplifies blade changes during production work. The 10 inch diameter defines the cutting depth and matches many cabinet and woodworking saws, allowing the blade to handle typical sheet goods and solid stock thicknesses. Laser cut anti-vibration slots in the plate control sideways movement during the cut, so the blade runs truer under load and supports a crisp, splinter-free finish at the workpiece edge. Because these anti-vibration slots reduce resonance that standard blades experience, the manufacturer specifies that there is no need for stabilizers, which keeps the setup straightforward on standard arbors.
This ultimate combination blade is designed as a general purpose solution, so it fits workflows that shift between ripping and crosscutting without changing blades. The layout of one flat tooth for ripping with four alternate top bevel teeth for crosscutting supports both operations, allowing a shop to handle dimensioning and trim cuts on a single table saw. Large gullets in front of the flat top rakers clear chips efficiently in long rips, so the operator can maintain steady feed pressure across full-length boards or panels. The 50 tooth count balances cut speed and finish, which is useful when processing mixed stock such as case parts and face frame components on the same machine. Silver Ice Coating resists corrosion and pitch build-up, helping the blade stay cleaner during runs in resinous materials and supporting more consistent cutting effort across the job.
Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut, so the LU84M011 tracks accurately and produces a crisp, splinter-free flawless finish at the cut line. This reduced movement also lessens stress on the carbide edges, which supports blade life over time. With this combination blade, the manufacturer states there is no need for stabilizers, so the plate relies on its own slot geometry for stability, keeping the setup focused on basic arbor mounting. The Premium Ti br Co HI-Density Carbide combination blend is specified for maximum performance, so each tooth is built to hold a sharp edge through repeated cycles of ripping and crosscutting before service. The combination of carbide blend, anti-vibration slots, and Silver Ice Coating means the blade is configured for extended use while maintaining a finish that suits cabinet and woodworking applications.
The Freud LU84M011 is a general purpose combination circular saw blade, so it is intended for both ripping and crosscutting tasks on woodworking saws using a 10 inch blade.
The blade uses 50 teeth with one flat tooth for ripping and four alternate top bevel teeth for crosscutting, giving a balanced design that supports smooth cuts across both operations.
Large gullets in front of the flat top rakers clear chips quickly, which supports faster ripping and helps keep the kerf open for smoother feeding through the saw.
Laser cut anti vibration slots drastically reduce vibration and sideways movement, so the blade runs truer in the cut and delivers a crisp, splinter-free flawless finish on the workpiece.
The Premium Ti br Co HI-Density Carbide combination blend is specified for maximum performance, which supports longer tooth life and consistent cutting results between sharpening cycles.
This blade features laser cut anti vibration slots that control resonance, so the manufacturer notes there is no need for stabilizers, keeping the mounting setup straightforward.
The Freud 10 inch general purpose saw blade LU84M011 combines a 50 tooth combination layout, Premium Ti br Co HI-Density Carbide, and laser-cut anti-vibration slots, so it supports both ripping and crosscutting with a crisp, splinter-free finish on cabinet and woodworking projects. When a job calls for one blade to handle varied cuts on a 10 inch, 5/8 inch arbor saw, this combination design provides a practical option grounded in a defined tooth pattern and coating system.
Sold In: 1 Each