DOUBLE FLUTE STRAIGHT BIT from Freud Tool is a straight mortising router bit designed for general stock removal with a smooth finish, so one bit handles cleanup and sizing when you want consistent surfaces. The 3/8 inch diameter cutting profile shapes or clears material to that exact width, which matters when routing mortises, dados, or grooves that must match mating parts. A 1/4 inch shank fits routers that accept that shank size, keeping this bit ready for common shop setups. The 2 inch overall length gives reach for deeper cuts in composition materials, plywoods, hardwoods, and softwoods, so the same bit serves across different sheet goods and solid stock. As a router bit in the Straight Mortising category, it focuses on straight, flat-bottom cuts, helping maintain accurate joinery and clean bottoms in routed pockets.
The 1/4 inch shank on the Freud 12-110T router bit seats into router collets made for that size, so the bit centers securely for smooth running. Using a straight mortising router bit with a 3/8 inch diameter helps align fences, guides, or CNC toolpaths to that known cutting width, which supports accurate dado, groove, and mortise dimensions. The 2 inch length gives enough projection for deeper passes while keeping the cutting geometry aligned close to the collet, which helps maintain control when routing in plywoods, hardwoods, softwoods, or other composition materials.
This Freud straight mortising bit sits in the Straight Mortising product class, so it is built for straight-line routing rather than profiling edges, which suits dados, mortises, and pocket routing. With a 3/8 inch diameter, it routes slots and grooves for parts that share that dimension, helping match hardware channels or panel grooves sized to that width. Its ability to cut composition materials and plywoods makes it useful on cabinet carcasses and built-ins where sheet goods dominate the layout. The same DOUBLE FLUTE STRAIGHT BIT also cuts hardwoods and softwoods, so shop-made face frames, rails, and stiles can be routed with the same setup across solid lumber components.
Being usable on CNC and other automatic routers means this general stock removal router bit can run in nested or point-to-point machining, where repeatable toolpaths cut multiple parts from a single sheet. Running in hand-held routers lets this 1/4 inch shank router bit handle on-site trimming, mortising, or small batch work without moving material to a large machine. When mounted in table-mounted portable routers, the bit supports fence-guided work, which is helpful for repeated grooves and slots that must line up from piece to piece.
The application description of general stock removal with a smooth finish indicates that the cutting geometry is designed to clear material efficiently yet leave a routed surface suitable for joinery, which reduces cleanup on dados and mortises. Because the bit cuts hardwoods and softwoods, edge quality stays consistent as projects move between solid frames and softwood cleats or supports, keeping routed joints uniform. Its performance in composition materials and plywoods matters in cabinet construction, where veneers and cores benefit from straight, clean cuts that help panels seat fully in grooves.
Using the same 3/8 inch straight router bit across CNC, automatic routers, hand-held routers, and table-mounted portable routers keeps dimensions tied to one tool, so templates, jigs, and CNC programs can revolve around a single cutting width. The Freud Tool brand and the specific 12-110T manufacturer part number give a repeatable reference when reordering or matching bits between machines, helping larger shops maintain consistent routing results across multiple stations.
The DOUBLE FLUTE STRAIGHT BIT cuts composition materials, plywoods, hardwoods, and softwoods, so one bit works across typical cabinet panels and solid wood parts.
This Freud straight mortising bit is specified for general stock removal with a smooth finish, making it suitable for routing mortises, dados, and pockets needing clean surfaces.
The Freud 12-110T router bit is rated for CNC and other automatic routers as well as hand-held and table-mounted portable routers, covering both shop and jobsite routing.
The 3/8 inch diameter creates grooves and mortises matching that width, which helps align mating parts or hardware channels sized to a 3/8 inch opening.
The 1/4 inch shank allows the bit to fit routers with 1/4 inch collets, providing a secure grip and smooth rotation during stock removal.
A smooth finish from general stock removal means routed surfaces often need less sanding, which keeps joinery fitting more precisely and saves time.
The DOUBLE FLUTE STRAIGHT BIT from Freud Tool, with its 3/8 inch diameter, 1/4 inch shank, and 2 inch length, is set up for general stock removal with a smooth finish across composition materials, plywoods, hardwoods, and softwoods. Its ability to run in CNC, automatic, hand-held, and table-mounted portable routers lets one router bit handle multiple routing stations and job types. For shops working through Wurth Baer Supply, this Freud 12-110T router bit provides a consistent straight mortising option for cabinet, furniture, and general woodworking projects.
Sold In: 1 Each