8091 Salice Full Overlay Hinge Kit for Pocket Door Slide with 75lb Capacity, Black
Description
8091 Salice Full Overlay Hinge Kit For Pocket Doors
8091 Salice full overlay hinge kit is a Knape and Vogt pocket door hardware set designed for the KV 8091 4x4 Pocket Door System, so it ties directly into that flipper slide setup for consistent operation. It provides a full overlay on doors up to 3/4 inch thick, which lets you run standard 3/4 inch cabinet doors while still covering the opening cleanly. The kit uses Salice style hinge brackets in a black finish, helping the hardware visually blend into darker interiors and media cabinets. With a 75 lb capacity rating, the hardware supports typical pocket door loads within that range, so the door and slide can work together without overstressing the hinge point. Every detail of this hinge kit is aimed at giving professional installers and serious DIY users a defined, repeatable way to hang overlay doors on the KV 8091 pocket door slide.
Key Pocket Door Hinge Kit Details And Uses
- The hinge kit is designed for the KV 8091 4x4 Pocket Door System, so it integrates directly with that slide layout and saves time adapting unrelated parts.
- Providing a full overlay on doors up to 3/4 inch thick means you can use common 3/4 inch cabinet doors and still cover the face frame or case edge for a finished look.
- The 75 lb capacity rating gives a clear load guideline, helping you match door size, material, and hardware selection to the intended use without overloading the hinge connection.
- Two brackets are supplied in the kit, which sets up a consistent hinge mounting pattern on the door and cabinet side so both sides of the pocket door operate the same.
- Four protective door felt pads are part of the kit, cushioning contact points so door movement is quieter and cabinet surfaces see less wear during repeated cycles.
- Bracket mounting hardware is part of the kit, so the hinge brackets can be fastened using parts matched to the system without searching for separate fasteners.
Pocket Door Hinge Mounting And Overlay Fit
This Salice full overlay hinge kit is tailored to the KV 8091 4x4 Pocket Door System, so the bracket geometry and hinge positions line up with that slide for reliable pocket action. By providing a full overlay on doors up to 3/4 inch thick, the hardware positions the door to cover the opening while still clearing the pocket slide path. The kit includes bracket mounting hardware to attach the brackets, which sets the door on the correct centerline relative to the 4x4 slide carriage. With a 75 lb capacity, the hinge setup supports doors within that weight range so the pocket slide and hinge work together smoothly across the full travel.
Using This Hinge Kit In Pocket Door Projects
Where This 8091SFULL34S Hinge Kit Fits Best
This 8091SFULL34S hinge kit from Knape and Vogt is designed for multimedia and workspace components that rely on the KV 8091 4x4 Pocket Door System, so it fits naturally into entertainment cabinets and workstation enclosures using that slide. Its full overlay function on doors up to 3/4 inch thick lets you run typical 3/4 inch cabinet doors that close flush over the case opening while still retracting into the pocket. The 75 lb capacity supports doors sized and built for that rating, which suits many media and storage doors in that system. The black finish aligns well with darker closet, garage, or media interiors where visible hardware needs to stay low profile. Two brackets and the related parts position the door for pocket travel so the slide and hinge geometry stay coordinated on cabinets built around the KV 8091 4x4 layout.
Why These Hinge Details Support Repeatable Results
Because the kit is specified for the KV 8091 4x4 Pocket Door System, the bracket dimensions and hinge locations are already matched to that track and carriage, which reduces layout work and keeps door reveals consistent from job to job. Full overlay support on 3/4 inch thick doors means you can standardize on common door stock while still delivering a concealed cabinet opening, simplifying ordering and machining. The 75 lb capacity rating gives a defined upper limit, so door design and material choices can be planned around that figure for predictable performance over time on typical multimedia and workspace installations. The protective door felt pads soften contact points as the door opens and closes, which helps maintain finishes at touch points during everyday use. Bracket mounting hardware in the kit pairs with the brackets, so the fastening method aligns with the bracket design and keeps the hinge seating secure on the cabinet and door for reliable pocket function.
Common Questions About This Pocket Door Hinge Kit
What pocket door system is this 8091 Salice hinge kit for?
The 8091 Salice full overlay hinge kit is designed to attach easily to the KV 8091 4x4 Pocket Door System, so it matches that specific flipper slide setup.
What door thickness does this hinge kit support?
The hinge kit provides a full overlay on doors up to 3/4 inch thick, so it works with standard 3/4 inch cabinet doors used in many pocket door projects.
What is the weight capacity of this pocket door hinge kit?
The 8091 Salice full overlay hinge kit has a 75 lb capacity, which sets a clear guideline for door weight when planning multimedia or workspace pocket doors.
How do the brackets work with the KV 8091 4x4 slide?
The hinge brackets are designed for the KV 8091 4x4 Pocket Door System, so their mounting and hinge positions align with the slide hardware for coordinated pocket action.
Why are protective door felt pads part of this kit?
The four protective door felt pads cushion contact points as the door moves, which reduces noise and helps limit wear on the door and cabinet surfaces.
What does the 8091SFULL34S part number refer to?
8091SFULL34S is the Knape and Vogt manufacturer part number for this Salice full overlay hinge kit that works with the KV 8091 4x4 Pocket Door System.
Selecting This Hinge Kit For KV 8091 Projects
This Knape and Vogt 8091 Salice full overlay hinge kit is built specifically for the KV 8091 4x4 Pocket Door System, so it matches the slide hardware used in many multimedia and workspace cabinets. Its full overlay support on doors up to 3/4 inch thick and 75 lb capacity give clear working parameters for door design around that system. For projects already using the KV 8091 4x4 flipper slide, this hinge kit provides the matched Salice-style brackets and related components needed to hang overlay doors within the defined rating.