Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2880 glass shelf support satin stainless describes a Sugatsune America shelf support designed for glass shelving where appearance and load rating both matter. The product is classified as a shelf support in the Shelf, Closet & Garage Organization category, so it suits projects where glass shelves are part of a storage or display run. The stated load capacity is 5 kg, or 11 lb per pair, measured at the center of the glass, which gives installers a clear working limit when planning span and load. The load rating applies when the shelf support distance is a maximum of 300 mm, so keeping supports within that spacing maintains the published capacity. The glass depth is specified as a maximum of 300 mm, which helps define how far the glass can project without exceeding the intended design envelope. The support is intended for 1/4 inch to 3/8 inch, or 6-10 mm, thickness glass, which sets the clamping range during layout.
The Sugatsune America 2880VA2 glass shelf support is designed for tempered glass with a thickness between 1/4 inch and 3/8 inch, or 6-10 mm, which simplifies selecting glass that will sit properly in the support. The load capacity is stated as 5 kg, or 11 lb per pair, measured at the center of the glass, so arranging pairs under each shelf within the specified spacing uses that rating effectively. The maximum support distance of 300 mm gives a defined span between supports along the shelf, guiding layout across wider cabinets or longer display units. The glass depth limit of 300 mm helps keep the shelf projection within the zone where this support is intended to perform, aligning depth across multiple bays.
This product is defined as a glass shelf support within the Shelf, Closet & Garage Organization group, so it is oriented toward shelving in storage or display applications built around cabinetry or casework. The satin stainless description in the SAP text signals a satin stainless appearance, which pairs with other satin stainless components in a project for a consistent visible hardware look. The glass depth maximum of 300 mm suits relatively shallow display or storage shelves that sit inside cabinets or along walls rather than deep work surfaces. Because the thickness range is 1/4 inch to 3/8 inch, or 6-10 mm, this support works with typical tempered glass shelf stock used in many residential and commercial interiors. The 5 kg (11 lb) per pair capacity suits lighter items within that rating, such as decor, toiletries, or smaller storage pieces, when arranged along a properly supported glass span.
The specified 5 kg (11 lb) per pair load capacity at the center of the glass, combined with a shelf support distance maximum of 300 mm, provides clear design parameters when spacing supports. Following that 300 mm maximum between supports along the shelf allows the published capacity to inform layout across multiple bays. The glass depth maximum of 300 mm ties directly into those spacing details, keeping shelf projection balanced with the support pattern. The thickness range of 1/4 inch to 3/8 inch, or 6-10 mm, tempered glass recommended means that once a glass thickness is selected within that band, it can be repeated through a project for consistent fit in each support. The manufacturer part number 2880VA2 and the reference to matte, polished, and satin variants help specifiers and installers align this satin stainless support with other finish options from Sugatsune America when building coordinated runs of shelving.
The Sugatsune America 2880VA2 glass shelf support is intended for glass from 1/4 inch to 3/8 inch, or 6-10 mm, which matches common tempered glass shelf sizes in cabinet and display work.
The 2880VA2 glass shelf support has a load capacity of 5 kg, or 11 lb per pair, measured at the center of the glass, which guides how much weight to place on each supported shelf.
The 2880VA2 shelf support is rated with a maximum shelf support distance of 300 mm, so supports are arranged along the shelf within that spacing for the stated load capacity.
The Sugatsune America glass shelf support with part number 2880VA2 is specified for glass depths up to 300 mm, which suits shallower cabinet and wall shelving applications.
The web description states that tempered glass is recommended for the 2880VA2 shelf support, which aligns the product with typical safety glass used in shelving.
The 2880VA2 glass shelf support is listed under Shelf, Closet & Garage Organization in the Shelf Supports product class, indicating its role in glass shelving within storage systems.
The Sugatsune America 2880VA2 glass shelf support from Wurth Baer Supply provides a defined 5 kg (11 lb) per pair load rating, a maximum 300 mm support spacing, and a glass depth limit of 300 mm, all centered on tempered glass from 1/4 inch to 3/8 inch thick. Those specifics allow this satin stainless support to slot into projects where controlled loading, consistent shelf depth, and standard tempered glass sizes are part of the design. For glass shelving within the Shelf, Closet & Garage Organization category, these parameters give a straightforward basis to match glass size, span, and appearance to the needs of each installation.
Sold In: 1 Each