Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Shelf Standard Aluminum Sugatsune AP-DM1820WT is a surface-mount aluminum shelf standard that supports adjustable shelving runs wherever the track is installed on a wall or cabinet side. The 1820 mm length provides a long continuous run, which helps lay out multiple shelf positions over tall closet, pantry, or garage bays without splicing shorter sections. The thin 3 mm profile keeps the standard low-profile against the mounting surface, which helps when working in tight spaces or where a flush, clean look is desired along cabinet interiors. The white finish noted in the description suits closet and storage interiors that already use light-colored components, which helps the standard blend visually with common casework colors. The aluminum construction keeps the standard lightweight during handling and cutting, while still giving a rigid track for shelf supports to lock into along the full length.
This surface-mount aluminum shelf standard is described as easy to cut to the desired length, which allows trimming each piece to match actual cabinet or wall height on site without special fabrication steps. The installer can work from the 1820 mm stock and cut standards for shorter closet sections, which helps keep shelf positions consistent across different openings using the same part. The thin 3 mm profile means the cut edges remain narrow, which supports a clean finished appearance when the standard terminates above a base or below a top panel. With screw holes every 120 mm, layout for mounting stays consistent even after cutting, because many of the original fastening points remain usable along the trimmed piece.
This surface-mount aluminum shelf standard works as the vertical track that carries shelf supports in closet, shelf, and garage organization projects covered by its category. Because it belongs to the shelf standards and brackets class, it is intended to pair with compatible shelf supports that engage its slot pattern, giving adjustable support points along the full 1820 mm length. The thin 3 mm profile keeps the track close to the cabinet or wall surface, which helps maintain usable shelf depth when planning storage layouts in shallow cases or narrow closets. Aluminum construction keeps the standard manageable during installation, especially when lifting a full-length 1820 mm piece into position for marking and fastening along tall runs. The white description ties into common light-colored storage interiors, which helps the track visually recede behind shelves while still providing a clear guide for bracket positioning during adjustments.
The screw hole located every 120 mm, 4-23/32", sets a predictable fastening rhythm along the standard, which supports straight, plumb installation over the full 1820 mm height and helps minimize twist that could affect bracket seating. The new slot shape designed to prevent shelf support from falling off helps keep brackets engaged while loading shelves, which supports smoother use in busy storage areas. Because the standard is easy to cut to the desired length, installers can produce multiple matching segments from several pieces, which helps keep shelf levels aligned across banks of cabinets using one reference part. The special screw with silver finish, identified by AP-SC3-16, is noted as available for this standard, which provides a matching fastener option when a consistent appearance at each screw point is important along exposed runs.
The AP-DM1820WT is a surface-mount aluminum shelf standard from Sugatsune America, which serves as the vertical track that supports adjustable shelf supports in storage and closet projects.
The shelf standard length is 1820 mm, so it covers tall cabinet or closet sections in a single continuous piece, helping keep shelf support positions aligned along the full run.
The AP-DM1820WT has a thin 3 mm, 1/8" profile, which keeps projection low and helps preserve shelf depth and clearance in tight cabinet or closet spaces.
The shelf standard has a screw hole located every 120 mm, 4-23/32", which provides regular fastening points and simplifies layout when attaching the track to walls or cabinet sides.
The AP-DM1820WT is described as easy to cut to the desired length, allowing on-site adjustment so the standard matches specific cabinet or wall heights.
The AP-SC3-16 is identified as a special screw with silver finish available for this shelf standard, providing a coordinated screw option where fastener appearance matters.
The Sugatsune America AP-DM1820WT surface-mount aluminum shelf standard brings an 1820 mm length, thin 3 mm profile, and screw holes every 120 mm to adjustable shelving projects, which supports clean layouts and straightforward fastening. The new slot shape designed to prevent shelf support from falling off adds security during shelf adjustments, which suits active storage areas. With an easy-to-cut aluminum construction and a special silver-finish screw option identified as AP-SC3-16, this standard fits projects that need customizable heights and consistent appearance along closet, pantry, or garage organization runs.