
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Plastic shelf hold down clip with 5 mm peg designed for 5/8 or 3/4 thick shelving locks the panel to the support, which helps keep closet and garage shelves from shifting when loaded or bumped. The clip is made for 3/4 shelf use, so it suits common cabinet and built-in shelf construction where installers frame for that thickness. Star ends on the shelf hold down bite against the shelf edge, which helps resist upward movement and keeps panels seated on the support under normal use. The 5 mm peg matches standard metric shelf pin drilling patterns, so it works in typical 32 mm system rows and other 5 mm routes without layout changes. Almond color on the Bainbridge Manufacturing 3411AL-62 clip blends with many light-toned shelving materials, so it remains visually low profile along closet runs and storage bays.
The shelf hold down with 5 mm peg is designed around standard 5 mm steel spoon shelf supports, so it plugs into the same holes as the support and works in typical cabinet or closet panel drilling. Because it is intended for 5/8 or 3/4 thick shelving, the hold down suits common melamine, composite, or similar shelf stock used in closet and garage organization projects. Star ends on the hold down bear against the upper face of the shelf, which creates a clamping action over the spoon support and limits shelf lift during everyday use. The plastic body of the clip seats against the shelf and side panel, which distributes contact and helps the shelf stay aligned along rows of supports.
This Bainbridge Manufacturing 3411AL-62 plastic shelf hold down clip fits into 5 mm peg holes alongside 5 mm steel spoon shelf supports, so it serves well in closet systems and garage organization built on those supports. Because it is designed for 5/8 or 3/4 thick shelving, it suits many pre-cut melamine shelves and custom cut boards sized for residential storage, laundry rooms, and utility cabinets that rely on adjustable shelf rows. Star ends on the hold down help clamp the shelf at each support location, which is useful wherever upward shelf movement from handling, stacked totes, or sliding items would otherwise disturb spacing. Almond color lets the shelf hold down blend into light-toned storage runs, so it works in visible living areas as well as back-of-house utility spaces without drawing attention along the vertical panels.
The 5 mm peg on this shelf hold down follows a common metric shelf support standard, so installers can rely on predictable fit across rows of 5 mm steel spoon shelf supports in cabinets or closet panels drilled on a consistent pattern. Designed for 5/8 or 3/4 thick shelving, the geometry of the hold down positions the star ends over the board edge so that each clip presses the shelf firmly toward the spoon supports, which helps maintain consistent reveals between multiple adjustable shelves. The plastic construction of the shelf hold down allows it to sit flush as it bears on the shelf surface, which keeps shelves registering to the same line along the cabinet or closet sides. By relying on one Bainbridge 3411AL-62 clip type for typical 5 mm spoon support systems, installers gain a repeatable approach for controlling shelf lift and alignment across different storage projects.
The plastic shelf hold down clip is designed for 5/8 or 3/4 thick shelving, so it covers two common board thicknesses used in closets, cabinets, and garage storage layouts.
The shelf hold down uses a 5 mm peg, so it fits standard 5 mm drilling and aligns with 5 mm steel spoon shelf supports in typical cabinet or closet panel rows.
The star ends on the shelf hold down grip the shelf edge and press it toward the support, which helps limit upward shelf movement under normal handling and loading.
The clip is designed to be used with 5 mm steel spoon shelf supports, so it integrates with installations already based on that specific support style.
The Bainbridge Manufacturing 3411AL-62 shelf hold down is almond, so it visually coordinates with many light-colored shelving and closet components.
The shelf hold down suits closet, cabinet, and garage organization projects that use 5/8 or 3/4 thick shelving with 5 mm steel spoon shelf supports.
The Bainbridge Manufacturing 3411AL-62 plastic shelf hold down clip with 5 mm peg is built for 5/8 or 3/4 thick shelving, which matches many closet and garage layouts. Using this almond shelf hold down with 5 mm steel spoon shelf supports helps keep shelves seated and aligned along standard 5 mm rows. For projects running on Wurth Baer Supply hardware, this shelf hold down offers a straightforward way to control shelf lift in adjustable systems using familiar drilling patterns.
Sold In: 1 Box