Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Edge Pull Series tab pull in the Advantage Two Series gives cabinet fronts a low-profile grip that stays easy to grab along the edge. The aluminum construction forms a light yet solid pull that handles frequent use on doors or drawers. A matte black finish keeps reflections down, helping faces read clean in a row of cabinets. The 4-7/16 inch (113 mm) center to center dimension sets the hole spread, so aligned drilling produces a straight run of pulls. With an overall length of 6 inches, the pull extends slightly beyond the fastener spacing, creating a balanced look along wider drawer fronts. A projection of 1-21/32 inches brings the gripping surface away from the cabinet face so fingers clear the edge during opening. The 3/4 inch width and 3/4 inch base diameter present a consistent face to the user, supporting a uniform layout across multiple installations.
This Berenson Corporation tab pull uses a 4-7/16 inch center to center layout, so holes can be drilled using that fixed spacing for every installation. The 112 mm center to center noted in the description closely matches this measurement, which supports planning in metric or imperial layouts. A 3/4 inch width helps position the pull evenly near an edge without covering too much of the door or drawer surface. The 3/4 inch base diameter gives each mounting point a defined footprint on the cabinet front, which helps seat the pull firmly against the surface. With a 6 inch total length running past the hole spread, the pull spans a practical portion of the front for a secure grip. The 1-21/32 inch projection keeps hands off the cabinet finish during operation while keeping the pull compact.
The Advantage Two Series aluminum tab pull suits cabinet and drawer fronts that call for a linear, contemporary handle. Its matte black finish lets the pull coordinate with other dark hardware and fixtures in a space, tying together door and drawer fronts visually. The 4-7/16 inch (113 mm) center to center dimension fits layouts that favor a mid-length pull rather than short finger pulls or extra-long bars. On wider drawers, the 6 inch overall length provides a defined gripping area across the front, helping users open heavier drawers from the center. On doors, the 3/4 inch width keeps the pull close to the edge, supporting an unobtrusive, edge-grab style that does not intrude far into the panel field. Because the pull is made from aluminum, it suits projects where installers want to limit added weight while still using a metal handle on every opening.
The 4-7/16 inch center to center spacing lets installers work with common drilling templates or jigs built around that dimension, which speeds layout over long cabinet runs. The 112 mm center to center reference in the description aligns closely with the 4-7/16 inch value, so designers working in metric units can coordinate their drawings to the same pull. A consistent 3/4 inch width means that once an offset from the door or drawer edge is chosen, the pull will sit with the same reveal on every front. The 1-21/32 inch projection provides a predictable stand-off distance, so installers can anticipate finger clearance even when planning around adjacent doors or tight reveals. The 3/4 inch base diameter at each mounting point spreads contact where the pull meets the cabinet surface, which supports a firm seat against the face. Together, these dimensions help deliver a uniform hardware layout across custom or production jobs using this specific Berenson 9008-4055-P pull.
This Berenson Edge Pull Series tab pull uses a 4-7/16 inch (113 mm) center to center measurement, which sets the distance between mounting holes for cabinet doors and drawers.
The Berenson 9008-4055-P pull has a 6 inch overall length, so it spans a noticeable portion of the cabinet front while keeping hole spacing at 4-7/16 inch.
This Advantage Two Series edge pull is made of aluminum with a matte black finish, giving a metal grip with a dark, non-gloss surface for contemporary cabinet designs.
The cabinet pull projects 1-21/32 inches from the front, providing finger clearance behind the pull while keeping it relatively close to the cabinet surface.
This matte black tab pull has a 3/4 inch width and a 3/4 inch base diameter, giving a consistent footprint where it contacts the cabinet face.
This matte black tab pull is part of the Advantage Two Series from Berenson Corporation, keeping style consistent with other pulls in that collection.
The Berenson Edge Pull Series tab pull in matte black brings a defined 4-7/16 inch (113 mm) center to center layout and 6 inch length to cabinet projects. Aluminum construction and a 1-21/32 inch projection support daily use on doors and drawers. With a 3/4 inch width and matching base diameter, the pull seats cleanly along edges for a modern, low-profile grip. For jobs built around the Advantage Two Series look, these fixed dimensions help keep every opening aligned to the same hardware standard.
Sold In: 1 Each
