Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Modern Square pull gives cabinet doors and drawers a modern linear look using the Advantage Series design in a champagne finish. The pull uses aluminum construction, which provides a light handle that is straightforward to work with on cabinets.
The pull has a 6-5/16 inch center to center dimension, so hole spacing on the cabinet front aligns with that measurement during layout and drilling. A center to center of 160 mm supports metric planning when cabinets or shop drawings are set up in millimeters.
The overall length of 6-23/32 inch provides hand clearance across wider drawer fronts while keeping a consistent visual line on doors. A projection of 1-3/16 inch allows fingers to wrap behind the pull without crowding the cabinet face, which helps when users grip from different angles.
The 13/32 inch width and 7/16 inch base diameter keep the profile slim, so the pull sits cleanly on narrow rails or stile faces without overhanging edges, which is useful on smaller door sizes.
The 160 mm center to center dimension defines exact mounting-hole spacing for this pull, so drilling operations on doors and drawers follow that single measurement for repeatable placement across a kitchen or project run.
A projection of 1-3/16 inch sets how far the pull stands off the cabinet face, which affects finger clearance when users grab from above, below, or the side. The 7/16 inch base diameter keeps the footing compact, which fits comfortably on narrower rails.
The 6-23/32 inch overall length provides a clear reference when positioning the pull on wider drawers, so installers can center it accurately relative to drawer width and height. The 13/32 inch width defines the visible face, guiding layout when aligning multiple pulls along horizontal lines.
The pull uses screw size 8-32 x 1 inch, so the threaded interface matches that specification when selecting fasteners and drilling pilot holes to support proper thread engagement into the cabinet front.
This Advantage Series cabinet pull fits work where a 6-5/16 inch center to center layout is already planned or desired, because the 160 mm spacing lines up with standard drilling jigs and metric cabinet designs. The 6-23/32 inch length suits medium and larger drawers or doors, giving enough reach across the face without extending excessively toward adjacent fronts.
The 13/32 inch width and 7/16 inch base diameter allow this aluminum cabinet pull to sit comfortably on face frames or frameless doors where stile or rail dimensions are limited, so the pull does not crowd edges. A champagne finish aligns with projects using champagne decorative hardware, helping maintain a unified appearance across handles and pulls in the same installation.
The 1-3/16 inch projection supports use on kitchen, bath, or shop cabinets where users frequently handle doors and drawers, because the stand-off distance creates a clear gap for fingers behind the pull. The aluminum material keeps each handle lightweight, which pairs well with thinner drawer fronts and lighter doors that do not benefit from heavier hardware pieces.
The 160 mm center to center measurement simplifies layout because the same spacing repeats on every cabinet, reducing variation when drilling and allowing templates or jigs to stay set to a single dimension throughout the job. This repeatability supports straight sight lines across banks of drawers and doors.
The 6-23/32 inch overall length works with the 6-5/16 inch mounting spread to keep the ends of the pull extending slightly beyond the screw locations, which helps distribute hand contact along the bar rather than concentrating force directly over the fasteners. The 13/32 inch width produces a slim front face, so a row of these pulls reads as a clean modern band instead of a bulky projection.
The 1-3/16 inch projection provides enough depth for a firm grip while controlling how far hardware protrudes into walkways, which can be useful on island cabinets or tight galley layouts. The 7/16 inch base diameter helps the pull seat firmly against the surface, providing a defined contact area that supports snug fastening on both solid and composite fronts.
The specified 8-32 x 1 inch screw size provides a known thread and length reference, which aligns with common cabinet drilling practices and helps the pull fasten securely into typical door and drawer thicknesses that match this screw length.
The Berenson Modern Square pull uses a 6-5/16 inch, or 160 mm, center to center dimension, which sets the exact hole spacing for mounting on cabinet doors and drawers.
The pull has an overall length of 6-23/32 inch, so it stretches slightly beyond the mounting points and provides a full hand grip across typical cabinet drawer fronts.
The Advantage Series pull is made from aluminum, which keeps the handle light and easy to handle during installation while providing a solid feel on cabinet fronts.
This champagne cabinet pull projects 1-3/16 inch from the cabinet surface, creating space for fingers behind the bar when opening doors or drawers from different angles.
The pull is specified with 8-32 x 1 inch screws, so the mounting holes and threads are sized for that screw diameter and length during fastening.
The visible face width is 13/32 inch, giving the pull a slim modern profile that fits comfortably on narrow rails or stiles without overpowering the cabinet design.
The Berenson Modern Square pull with 6-5/16 inch (160 mm) center to center spacing, 6-23/32 inch length, and 1-3/16 inch projection offers a defined set of dimensions for cabinet layouts. Choosing this champagne aluminum pull aligns hole spacing, grip depth, and visual proportion so doors and drawers operate consistently across the project.
Sold In: 1 Each
