
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Contemporary Advantage Three pull gives you a 5-1/16 inch (128 mm) center to center mounting layout, so it aligns with standard drill patterns used on many cabinet and drawer fronts. The pull is part of the Advantage Series, which groups matching decorative hardware for consistent styling across a project. It is made from aluminum, so the handle keeps weight down on doors and drawer fronts while providing a solid gripping surface. The brushed nickel finish provides a muted metallic appearance that coordinates with many hinges and other decorative hardware in the same tone. Overall length is 5-3/8 inch, which leaves usable grip beyond the mounting holes for comfortable hand clearance. A projection of 1-7/32 inch spaces fingers away from the cabinet face, which supports easy opening. The 1/2 inch width offers a slim profile, which helps when installing multiple pulls on narrower drawer fronts.
This Berenson 9115-1BPN-P pull uses a 5-1/16 inch (128 mm) center to center distance, so hole locations are fixed for consistent drilling across multiple doors and drawers. The pull projects 1-7/32 inch from the mounting surface, establishing a defined standoff that supports finger clearance. An overall length of 5-3/8 inch sets the visible span of the handle, which matters when aligning several pulls in a row on wider cabinet runs. The 1/2 inch width and 25/32 inch base diameter determine how much of the front each end covers, affecting how the pull visually ties into rail and stile dimensions. The specified screw size of 8-32 x 1 inch defines the threaded connection through standard cabinet door or drawer materials in typical thickness ranges.
The Advantage Series aluminum pull with 5-1/16 inch center to center spacing fits cabinet and drawer fronts that are drilled or planned for 128 mm hole patterns. Its 5-3/8 inch overall length positions it well on medium-width doors and drawers where short pulls may look undersized. The brushed nickel finish supports use anywhere brushed nickel decorative hardware is specified, tying handles visually to other components in the project. With a 1/2 inch width, the pull sits comfortably on narrow rails or drawer fronts without crowding edge details. The 25/32 inch base diameter at each end provides a defined contact area against painted, stained, or laminated fronts, which can help visually frame the mounting points in residential or commercial cabinetry.
The 5-1/16 inch (128 mm) center to center measurement on the Berenson Contemporary Advantage Three pull supports repeatable installations because once a drilling jig or template is set to 128 mm, it can be used across an entire job. The 1-7/32 inch projection gives a consistent stand-off from the cabinet face, so doors and drawers across a run feel the same when grasped. With a 5-3/8 inch length, alignment of multiple pulls remains visually consistent, reducing layout adjustments on longer banks of drawers. The 1/2 inch width keeps the pull centered on typical rail sizes, helping maintain equal margins above and below the handle. Aluminum construction keeps weight to a known level, which can be useful when matching hardware feel across several fronts. The brushed nickel finish delivers a stable color tone, supporting cohesive appearance when the same pull is used throughout a room.
The Berenson Contemporary Advantage Three pull uses a 5-1/16 inch (128 mm) center to center size, which sets the hole spacing for mounting on cabinet doors and drawers.
The 9115-1BPN-P pull is 5-3/8 inch long, projects 1-7/32 inch from the surface, and has a 1/2 inch width, defining how it sits and feels on the cabinet front.
The pull is made from aluminum with a brushed nickel finish, which sets its weight and surface appearance to match brushed nickel decorative hardware.
The 128 mm center to center spacing aligns with many pre-drilled cabinets, so this pull fits existing 5-1/16 inch hole patterns without changing the drilling layout.
The Berenson Contemporary Advantage Three pull uses 8-32 x 1 inch screws, which match common cabinet door and drawer thickness ranges in many installations.
The 1-7/32 inch projection sets the pull off the cabinet face enough to give consistent finger clearance, which supports comfortable gripping during frequent opening.
The Berenson Contemporary Advantage Three aluminum pull with 5-1/16 inch (128 mm) center to center spacing provides a defined layout for cabinet and drawer fronts. Its 5-3/8 inch length, 1-7/32 inch projection, and 1/2 inch width deliver a known fit and feel across doors and drawers. The brushed nickel finish coordinates with other brushed nickel decorative hardware, supporting unified styling in kitchens, baths, or casework projects. For projects built around 128 mm hole patterns and a brushed nickel look, this 9115-1BPN-P pull offers consistent dimensions to use across the run.
Sold In: 1 Each