Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Traditional Advantage One pull gives a 3 inch center to center grip that aligns with common hole spacing on cabinet doors and drawers, so installers can match existing drilling and keep layouts consistent across a run of fronts. The pull length of 4-5/16 inches provides hand clearance beyond the fastener span, which supports comfortable everyday operation on kitchen, bath, or shop cabinets. A projection of 15/16 inch stands the pull off the face, creating space for fingers while keeping the profile relatively tight to the door or drawer front. The 7/16 inch width keeps the pull visually light, which helps it work on narrow rails as well as wider drawer fronts. A base diameter of 9/16 inch creates a defined footprint at each mounting point, giving a finished look around the screw holes.
The 3 inch center to center dimension defines the drilling pattern for this pull, so installers can lay out or reuse 3 inch on-center holes when planning cabinet fronts. A projection of 15/16 inch influences door clearance near adjacent surfaces, keeping the handle close to the face while still offering room for fingers behind the pull. The 4-5/16 inch overall length affects visual spacing on narrower drawers and doors, helping plan edge distances so the pull sits balanced on the panel. The 9/16 inch base diameter informs how much area at each end will contact the surface, allowing alignment with rail widths or decorative trim lines. The 7/16 inch width helps determine orientation and spacing when running multiple pulls in a bank of drawers.
The Berenson Traditional Advantage One pull with a 3 inch center to center dimension fits cabinets drilled on the common 3 inch pattern, which is frequently used on many door and drawer applications. The 4-5/16 inch overall length lets this pull span a practical portion of small to medium drawer fronts, providing enough handle area without overwhelming narrower faces. A projection of 15/16 inch positions the grip slightly off the surface, working well on face frame or frameless cabinets where users want clearance without a deep protrusion into the room. The 7/16 inch width allows the pull to sit comfortably on slim stiles, which supports use on doors with narrow rails or built-ins with tight proportions. The matte black finish pairs with other dark hardware components, helping maintain a consistent look across kitchens, baths, or workroom cabinets that use black decorative hardware.
The 3 inch center to center drilling dimension helps installers repeat hole locations across multiple doors and drawers, which supports straight sightlines and uniform handle placement along cabinet runs. The 9/16 inch base diameter at each end provides a defined seating area around the fastener, which can visually stabilize the pull against the cabinet surface and help mask small chips near the bore. The 4-5/16 inch length, combined with 15/16 inch projection, sets a predictable footprint for the handle, assisting in planning clearances near edges, adjacent pulls, or wall returns. The 7/16 inch width offers a consistent bar thickness for the hand to contact, supporting repeatable feel from one cabinet to the next. Zinc construction gives the pull a metal structure suited to typical cabinet use, which supports long-term handling on frequently opened doors and drawers. The matte black finish presents a steady low-sheen surface that can visually tie together multiple cabinet zones using the same pull style.
The Berenson Traditional Advantage One pull has a 3 inch center to center measurement, which matches many standard cabinet drilling patterns for doors and drawers.
The Berenson 9197-1055-P pull has an overall length of 4-5/16 inches, giving extra gripping area beyond the 3 inch fastener spacing on cabinet fronts.
This matte black pull projects 15/16 inch from the cabinet surface, creating finger clearance while keeping a relatively low profile on doors and drawers.
The Traditional Advantage One pull is made from zinc, providing a solid metal body suited to regular cabinet door and drawer use.
This Berenson cabinet pull has a matte black finish, giving a non-reflective dark look that coordinates with other black decorative hardware.
The pull has a 9/16 inch base diameter and a 7/16 inch width, defining its footprint and slim profile on cabinet doors and drawers.
The Berenson Traditional Advantage One pull combines a 3 inch center to center pattern, 4-5/16 inch length, and 15/16 inch projection to support straightforward cabinet layouts using common drilling. Zinc construction and a matte black finish give the pull a metal body with a dark, consistent appearance that coordinates with other black decorative hardware. The 7/16 inch width and 9/16 inch base diameter create a slim yet defined presence, useful across both narrow stiles and wider drawer fronts. For projects built around a 3 inch pattern that call for a matte black pull, this model lines up with familiar dimensions and finish requirements.
Sold In: 1 Each
