Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Advantage Series pull gives you a 3-3/4 inch, or 96 mm, center to center layout that lines up with standard cabinet drilling, so existing holes on many doors and drawers can be reused during hardware changes. The matte black finish creates a dark, uniform appearance that helps pulls visually align across a run of cabinetry. Zinc die cast construction forms a solid metal body, which supports everyday cabinet and drawer use in residential or light commercial spaces. The pull length of 4-1/16 inch provides hand contact across the grip area, which helps users open doors and drawers with a stable pull point. A projection of 1-1/4 inch sets the hand clearance off the front of the face frame or drawer front for comfortable reach. A width of 5/16 inch keeps the profile slim across the face, which works well where a narrow, clean look is preferred.
The 96 mm center to center measurement sets the mounting hole spacing, so installers can drill two points exactly 96 mm apart for a correct fit. The specified screw size of 8-32 x 1 inch indicates the thread and length used with typical cabinet door and drawer front thicknesses, which supports a secure mount into standard drilled holes. The 5/16 inch width and base diameter define the bearing area around each fastener, which helps the pull sit flat against the wood surface when tightened. With a projection of 1-1/4 inch, the pull stands off enough from the front to allow fingers to wrap behind the bar, which aids in repeated opening and closing motions. The 4-1/16 inch overall length positions the pull across the face, which helps align multiple pulls at consistent horizontal or vertical distances.
This matte black cabinet pull from the Advantage Series provides a dark finish across the zinc die cast body, which supports projects where hardware is meant to visually recede against painted or dark stained fronts. The 3-3/4 inch, or 96 mm, center to center layout matches a commonly used drilling pattern, which helps coordinate new pulls with many existing cabinet and drawer fronts. With an overall length of 4-1/16 inch, the pull occupies a defined span on the rail or drawer front, which can be repeated across a kitchen or workspace for consistent sight lines. The 5/16 inch width keeps the bar relatively narrow, which is useful on smaller drawers or door frames where wider pulls might crowd panel details or edge profiles. The 1-1/4 inch projection creates hand clearance from the surface, which supports comfortable grip on both doors and drawers during everyday use.
The defined 96 mm center to center spacing allows installers to use drilling templates or jigs without adjustment between cabinets using this pull, which speeds repetitive layout work. The zinc die cast construction keeps dimensions consistent from pull to pull, which helps each piece sit level when mounted across multiple fronts. A base diameter of 5/16 inch at each contact point gives a small, repeatable footprint around the mounting holes, which supports tidy alignment over drilled openings. The 8-32 x 1 inch screw specification sets expectations for thread engagement through standard cabinet materials, which helps achieve a tight joint between the pull bases and the door or drawer. Combined, the 4-1/16 inch length and 1-1/4 inch projection define a stable gripping area, which supports predictable hand placement and operation over long runs of cabinetry.
The Berenson Advantage Series pull has a 3-3/4 inch, or 96 mm, center to center dimension, which guides drilling distance for mounting holes on cabinet doors and drawers.
The pull is made from zinc die cast material, which creates a solid metal body suitable for routine cabinet and drawer operation in typical woodworking environments.
The pull projects 1-1/4 inch from the mounting surface, which provides finger clearance behind the bar for gripping doors and drawers comfortably.
The 6127-2055-P pull is specified with 8-32 x 1 inch screws, which matches common cabinet drilling and supports secure attachment to doors and drawer fronts.
The pull has an overall length of 4-1/16 inch, which defines the visible span on the cabinet front and helps plan spacing between adjacent pulls.
The pull has a width of 5/16 inch and a 5/16 inch base diameter, which set a slim profile and a compact contact area where the pull meets the cabinet surface.
The Berenson Advantage Series pull with 3-3/4 inch, or 96 mm, center to center spacing, matte black finish, and zinc die cast construction provides defined dimensions for consistent cabinet layouts. Using its 4-1/16 inch length, 1-1/4 inch projection, and 5/16 inch width, layouts can be planned to align pulls across doors and drawers. For projects that match a 96 mm drilling pattern with a dark, slim profile, this 6127-2055-P pull from Wurth Baer Supply supports straightforward selection and repeatable cabinet hardware results.
Sold In: 1 Each
