Berenson Edge Pull Series 4-7/16" (113 mm) Center to Center Champagne Tab Pull, - 8999-40CZ-P
Description
Berenson Edge Pull Series Tab Pull For Cabinets
Berenson Edge Pull Series tab pull gives cabinets a clean grip point while keeping the front face mostly clear. The aluminum construction provides a solid metal feel that supports frequent opening and closing on busy doors or drawers. The Advantage Two Series design groups this pull with matching pieces in the same family, which helps maintain a consistent hardware look across a project. A champagne finish adds a warm metallic tone that works where a softer look than chrome or stainless is preferred. The 4-7/16 inch (113 mm) center to center dimension sets the screw spacing, so the pull spans the hand comfortably without dominating a narrow front. A projection of 1-21/32 inches stands the pull off the surface enough for fingers to wrap behind it during use.
Key Edge Pull Details That Support Daily Use
- The aluminum material keeps the pull lightweight while still offering a sturdy metal grip, which helps cabinet fronts operate smoothly under regular handling.
- The champagne finish establishes a warm, neutral metallic look that coordinates with many door and drawer finishes in kitchens, baths, or office cabinetry.
- The 4-7/16 inch (113 mm) center to center spacing balances hand room and visual scale, which helps the pull sit comfortably on both smaller and wider fronts.
- The overall 6 inch length extends slightly beyond the mounting points, creating more usable grip surface for different hand positions along the tab.
- The 3/4 inch width defines a slim front profile, which lets the pull present as a minimal strip along the edge instead of a bulky handle.
- The 1-21/32 inch projection sets the standoff from the cabinet face, helping provide finger clearance behind the pull during opening and closing.
Edge Pull Fit, Center To Center, And Layout
The 112 mm center to center dimension from the SAP description and the 4-7/16 inch (113 mm) center to center listing both indicate the screw spacing used to mount this pull. This spacing governs drilling layout when placing multiple pulls in a line. A base diameter of 3/4 inch defines the footprint at each mounting point, which helps determine how much flat surface is needed at the installation area. The 3/4 inch width matches that footprint, so the visible strip along the edge stays narrow and straight. With a 6 inch overall length, the pull extends beyond the mounting centers at each end, affecting how far it reaches along the door or drawer edge when aligned to a layout line.
Using This Advantage Two Edge Pull On Projects
Where This Champagne Aluminum Tab Pull Fits
This Advantage Two Series tab pull works in cabinet applications where an edge grip is preferred over a traditional protruding handle. The aluminum material is suited for wood-based cabinet fronts commonly used in kitchens, laundry areas, and workspaces. A champagne finish supports use in settings where a subdued metallic color coordinates with painted or stained fronts without high reflectivity. The 4-7/16 inch (113 mm) center to center format matches layouts that call for a mid-size pull, so it can be used across banks of doors and drawers for a unified appearance. Its 6 inch overall length lets it span a practical section of the edge, which helps the same pull work on both narrower and wider fronts in a run.
Details That Support Consistent Grip And Alignment
The 1-21/32 inch projection determines how far fingers can wrap behind the pull, supporting a firm grip during repeated opening. This projection also sets how far the tab stands off the cabinet face, which affects shadow lines and visual depth along the edge. A 3/4 inch width gives a stable bearing surface against the cabinet, supporting alignment when multiple pulls are installed at the same height. Because the center to center spacing is fixed at 4-7/16 inches (113 mm), hole placement can be repeated accurately across several fronts. The 3/4 inch base diameter at each mounting point helps distribute load around the fastener areas, supporting the pull when significant hand force is applied. Together, these dimensions guide layout so each pull sits straight, feels consistent in the hand, and operates in the same way from cabinet to cabinet.
Common Questions About This Berenson Edge Pull
What is the center to center size of this pull?
The Berenson Edge Pull Series tab pull has a 4-7/16 inch (113 mm) center to center spacing, which sets the screw hole locations for consistent mounting across multiple cabinet fronts.
How long is the Advantage Two Series edge pull overall?
The pull has a 6 inch overall length, so it extends beyond the mounting centers to give more gripping area along the cabinet edge while keeping a controlled visual footprint.
What material and finish does this tab pull use?
The tab pull is made from aluminum with a champagne finish, providing a metal grip and a warm metallic color that coordinates with many cabinet surfaces.
How far does this cabinet pull project from the door?
The pull projects 1-21/32 inches from the surface, giving finger clearance behind the pull so doors and drawers can be opened with a full hand grip.
What are the width and base dimensions of this pull?
The pull has a 3/4 inch width and a 3/4 inch base diameter, so the visible strip and the mounting footprint share a slim, consistent profile on the cabinet edge.
Which Berenson series does this edge pull belong to?
This pull belongs to the Advantage Two Series from Berenson Corporation, which helps align it with other pieces in the same decorative hardware family.
Choose This Edge Pull For Consistent Cabinet Layouts
The Berenson Edge Pull Series tab pull with 4-7/16 inch (113 mm) center to center spacing, 6 inch overall length, and 1-21/32 inch projection offers defined dimensions for repeatable layouts. The aluminum construction and champagne finish give a straightforward, warm-metal option for coordinated cabinet runs.