Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Modern Square Series pull gives cabinets and drawers a clean modern line using a 5-1/16 inch (128 mm) center to center drilling layout, so hole spacing follows a common metric standard on many contemporary jobs. The polished chrome finish presents a bright, reflective surface, which visually pairs well with other chrome decorative hardware in the same space. Aluminum construction keeps the pull lightweight while still providing a rigid gripping surface across its 5-7/16 inch overall length, helping doors and drawers open smoothly. The 1-3/16 inch projection sets the handle off the front of the cabinet face, creating space for fingers to wrap around the bar. A base diameter of 7/16 inch and width of 13/32 inch keep the footprint compact, which helps when aligning multiple pulls across a bank of doors or drawers.
The 128 mm (5-1/16 inch) center to center drilling pattern defines the hole spacing required for this pull, which lets installers pre-drill cabinet doors and drawer fronts with confidence that the handle will seat properly. With a 5-7/16 inch overall length, the pull slightly overhangs the drilling span on both sides, which helps visually balance the handle on wider fronts without overwhelming narrower faces. The 1-3/16 inch projection determines how far the gripping surface stands away from the cabinet face, providing working room for fingers behind the bar while keeping the profile low. A 7/16 inch base diameter at each mounting point offers a compact bearing surface against the cabinet, which supports accurate alignment along reference lines during installation.
This Advantage Series pull from Berenson uses a 5-1/16 inch (128 mm) center to center layout, which suits cabinet doors and drawer fronts drilled to the common 128 mm handle standard. The 5-7/16 inch overall length lets the pull span a wider portion of the front than the hole spacing alone, which can visually anchor medium-width doors or drawers in kitchen, bath, or shop cabinetry that follows contemporary design. With a 1-3/16 inch projection, the gripping bar stands off the face enough to be comfortable when mounted on thicker drawer fronts, while still presenting a compact profile suited to modern square styling. The 7/16 inch base diameter and 13/32 inch width keep the pull feeling lean, which works well on flat-panel or slab-style cabinet fronts where clean lines are important. The polished chrome finish ties into other polished chrome decorative hardware pieces, helping maintain a unified look wherever this pull is mounted.
The fixed 5-1/16 inch (128 mm) center to center drilling dimension allows templates and jigs set to 128 mm to be used, which can speed up repetitive installations across multiple doors and drawers on a project. Because the overall length measures 5-7/16 inch, edge distances from the mounting holes to the ends of the pull remain consistent, which aids in predictable visual spacing when aligning handles along cabinet banks. The 1-3/16 inch projection creates a defined standoff, so installers know how far the handle will protrude into working areas such as walkways or narrow corridors, supporting clear planning when coordinating with adjacent components. A 7/16 inch base diameter and 13/32 inch width set a predictable footprint, which helps when laying out pulls to line up with rails or stile widths on face-frame or frameless cabinets. The polished chrome finish on aluminum material supports a uniform surface appearance, which helps maintain consistent results across multiple pulls on the same installation.
This pull uses a 5-1/16 inch (128 mm) center to center drilling layout, which defines the spacing between mounting holes for cabinet doors or drawer fronts.
The pull has a 5-7/16 inch overall length, 1-3/16 inch projection from the cabinet face, a 7/16 inch base diameter, and a 13/32 inch width, shaping its grip and profile.
The pull is made from aluminum with a polished chrome finish, giving a bright metallic appearance that coordinates with other polished chrome decorative hardware.
A 1-3/16 inch projection sets the handle off the cabinet face, creating space for fingers behind the pull while keeping the overall profile relatively compact.
This pull is from Berenson Corporation, in the Modern Square Series and Advantage Series family, pairing a squared profile with a polished chrome finish.
This polished chrome cabinet pull is identified by manufacturer part number 9013-4026-P, which links it to the specific Modern Square Series 128 mm model.
The Berenson Modern Square Series 5-1/16 inch (128 mm) center to center polished chrome pull combines a defined drilling layout with a compact, modern profile, which supports consistent results across doors and drawers. Its 5-7/16 inch overall length, 1-3/16 inch projection, and 7/16 inch base diameter create a predictable geometry that fits many contemporary cabinet designs. When a project calls for an aluminum pull with polished chrome finish from a recognized decorative hardware brand, this 9013-4026-P model offers the key dimensions and appearance needed for coordinated cabinet installations.
Sold In: 1 Each
