Berenson Modern Square Series 6-5/16" (160 mm) Center to Center Polished Chrome Pull, - 9016-4026-P

Berenson Modern Square Pull For Cabinet Fronts

Berenson Modern Square pull gives a 6-5/16 inch center to center grip that spans typical cabinet drawer and door widths, so layouts line up cleanly across a run. The Advantage Series identity ties this pull to a modern, squared style that suits contemporary casework. Its aluminum material keeps the pull light on the door or drawer front, which helps when working with larger fronts or thinner materials. The polished chrome finish provides a bright, reflective surface that reads clean against painted or laminated cabinetry, supporting a crisp visual line across multiple fronts. Overall length at 6-23/32 inches means the pull extends slightly past the drilled centers, giving good hand clearance while still fitting on standard residential and light commercial fronts.

Key Details Of This Advantage Series Pull

• The 6-5/16 inch (160 mm) center to center layout gives a precise drilling dimension, which supports repeatable hole placement on cabinet doors and drawers when using jigs or line boring equipment.
• The 6-23/32 inch overall length positions the ends slightly beyond the mounting holes, which creates a visually balanced margin on most cabinet fronts and helps maintain consistent reveals across multiple units.
• The 1-3/16 inch projection sets the pull away from the surface, which offers finger clearance for a comfortable grip while keeping the handle close enough to reduce snagging in tight galley or corridor installations.
• The 13/32 inch width keeps the profile slim, which gives a modern look while presenting enough face area for a solid grasp on heavier drawers or full-height pantry doors.
• The 7/16 inch base diameter at each contact point concentrates the load on a defined footprint, which supports a snug mount against the door or drawer front.

Mounting Measurements For Clean Cabinet Alignment

The 160 mm center to center dimension establishes a metric drilling pattern that aligns with common European cabinet layouts, so it fits smoothly into projects built around system hole spacing. With a 1-3/16 inch projection, the pull stands off the surface enough to clear typical door edge profiles while still reading as a low-profile piece of hardware. The 13/32 inch width pairs with the 6-23/32 inch length to produce a handle that visually anchors wider drawers without overwhelming narrower doors, simplifying hardware selection across a mixed cabinet run.

Using This Polished Chrome Pull In Real Projects

Where This 160 mm Center Pull Works Best

This 160 mm center to center pull fits applications where a consistent drill pattern is required across banks of drawers and doors, such as kitchens or shop-built casework. The aluminum construction suits cabinet and furniture projects that benefit from lighter hardware on the front, particularly on large or thick faces where weight concentration matters. With a polished chrome finish, the pull supports installations that need a reflective, modern surface, such as contemporary kitchens or office storage. The length of 6-23/32 inches spans mid-width drawers effectively, giving a wide grasping area that helps distribute pull force across the front.

In cabinet runs using metric spacing, this pull's 160 mm centers allow straightforward layout with templates or automated drilling systems, which reduces layout variation between openings. The 1-3/16 inch projection and 13/32 inch width work together to provide a stable grip for everyday use on frequently accessed doors and drawers. The 7/16 inch base diameter offers defined contact points that sit firmly against the front surface, which supports solid-feeling operation when fronts are opened and closed repeatedly in residential or light commercial spaces.

Why These Dimensions Help Repeatable Installation

The 6-5/16 inch (160 mm) center to center measurement simplifies repetitive drilling operations, because installers can set jigs or stops once and apply the same spacing to every matching front. The 6-23/32 inch overall length offers enough bar beyond the centers to visually align hardware with door and drawer proportions across a project. The 1-3/16 inch projection gives predictable clearance from the cabinet face, which helps when aligning pulls near adjacent walls, appliances, or tall panels where hand space is limited.

The 13/32 inch width allows the pull to sit neatly on narrow stile widths, so it can be positioned close to door edges without overhanging the stile. The 7/16 inch base diameter defines a clear bearing area against the panel, which helps the pull seat evenly when tightened. As part of the Advantage Series, this pull shares a consistent modern square styling with other pieces in the collection, making it straightforward to repeat a single visual language across doors, drawers, and auxiliary cabinetry.

Common Questions About This Berenson Pull

Select This Pull For Metric-Center Cabinet Runs

The Berenson Modern Square pull with 160 mm center to center spacing, 6-23/32 inch overall length, and polished chrome finish fits projects needing a consistent modern look on cabinet doors and drawers. Use these defined dimensions when planning hardware across your next casework run.