Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Modern Square Series pull gives cabinets a contemporary linear grip using a straight aluminum bar, so installers get a clean, modern look with predictable handling on doors and drawers. The Advantage Series designation ties this pull to a coordinated decorative hardware family, which helps projects stay visually consistent across a full run of cabinets. A brushed nickel finish on the aluminum body provides a muted metallic appearance, so fingerprints are less obvious during regular use than on high-gloss surfaces. The 8 inch overall length creates a substantial handhold, giving users a confident grasp on wider drawer fronts.
The pull is built around a 7-9/16 inch (192 mm) center to center mounting dimension, which matches common drilling patterns for longer cabinet hardware. A 13/32 inch width keeps the profile slim while still reading as a solid visual line across the front, supporting modern design layouts.
The 192 mm center to center mounting measurement on this pull anchors the drilling pattern, so jigs or templates can be set once and reused across every front in a run. A base diameter of 7/16 inch tells installers how much flat surface is needed around each hole, which helps when positioning the pull near panel edges or profiled rails. The 1-9/32 inch projection defines how far the handle stands off the surface, allowing planners to account for door swing clearance next to walls or adjacent fronts. At 8 inches long and 13/32 inch wide, the pull spans a noticeable section of the face while staying slim enough for tight layouts around other hardware.
This 7-9/16 inch center to center cabinet pull suits applications where longer hardware visually balances wider doors and drawers, because the 8 inch overall length stretches the line of the handle across more of the front. The Modern Square Series geometry, with its straight aluminum bar and narrow 13/32 inch width, works well on flat-panel or slab-style cabinetry, where clean lines are a design priority. Brushed nickel finish on aluminum coordinates with many satin nickel hinges and appliances, helping maintain a unified hardware appearance in kitchens, baths, or built-ins. The 1-9/32 inch projection offers enough stand-off for adult hands to grip comfortably, which is useful on frequently used base cabinets and tall pantry doors.
The Advantage Series label identifies this pull as part of a broader decorative hardware offering from Berenson Corporation, which supports projects that repeat similar pulls at different lengths. Using the same brushed nickel finish and square styling across multiple cabinet zones can keep visual transitions smooth from wall units to base cabinets.
The fixed 192 mm center to center dimension lets installers standardize hole drilling, which reduces layout time and helps fronts line up consistently across a whole room. When every pull shares the same 7-9/16 inch spacing, it becomes easier to align handles horizontally along banks of drawers or vertically on tall doors. The 7/16 inch base diameter around each mounting point provides a defined contact area against the cabinet surface, which helps the pull sit stable and square when tightened.
The combination of 8 inch length, 13/32 inch width, and 1-9/32 inch projection creates a predictable handhold size, so users experience the same grip feel from one cabinet to the next. Aluminum construction keeps each pull lighter than many solid steel options, which can be beneficial on large doors where hardware weight adds up. The brushed nickel finish offers a consistent satin sheen that helps minor handling marks read less sharply under everyday lighting, supporting a tidy appearance over time when cabinets are used frequently.
The pull has a 7-9/16 inch, or 192 mm, center to center dimension, so mounting holes must be drilled at that spacing for a proper fit on cabinet fronts.
The Berenson 9018-4BPN-P pull is 8 inches long, about 13/32 inch wide, and projects 1-9/32 inches from the cabinet face, shaping the handhold and clearance.
The pull is made from aluminum with a brushed nickel finish, combining lightweight construction with a satin metallic appearance for modern cabinet installations.
A 1-9/32 inch projection sets the pull away from the cabinet face, giving fingers room behind the bar so doors and drawers can be gripped comfortably.
The 192 mm center to center length works well on wider doors and drawers, where the 8 inch bar visually matches the front width and offers a longer gripping area.
This brushed nickel aluminum pull is part of the Advantage Series and Modern Square Series from Berenson Corporation, supporting coordinated decorative hardware layouts.
The Advantage Series brushed nickel pull with 192 mm center to center spacing gives installers a defined drilling pattern and a modern square profile that suits contemporary cabinetry. Aluminum construction with an 8 inch length and 1-9/32 inch projection offers a consistent handhold on doors and drawers. When a project calls for a brushed nickel finish, 7-9/16 inch mounting distance, and Modern Square styling from Berenson Corporation, this 9018-4BPN-P pull provides a straightforward match.
Sold In: 1 Each
