Berenson Contemporary Advantage Two Series 3-3/4" (96 mm) Center to Center Matte Black Pull, - 9024-4055-P

Berenson Contemporary Advantage Two Pull For Cabinets

Berenson Contemporary Advantage Two pull is a cabinet handle from Berenson Corporation designed for projects calling for a 3-3/4 inch (96 mm) center to center layout, so it aligns with standard drilling patterns on many cabinet doors and drawers. The pull is made from aluminum, which keeps weight low while still giving a solid feel when opening or closing fronts in a busy shop or kitchen. Its matte black finish provides a dark, uniform appearance that supports contemporary or transitional cabinet designs where visible hardware becomes part of the overall look. The pull measures 6-5/16 inches in overall length, giving hand clearance beyond the 96 mm mounting points, which helps when gripping with fingers or a full hand. A base diameter of 1-1/2 inches at each end spreads the contact area on the door surface, supporting stable mounting on wood or similar materials.

Key Details That Support Cabinet Workflows

• The 3-25/32 inch center to center dimension sets precise hole spacing, so drilling or existing bores can be laid out consistently across multiple doors and drawers in a run.
• The 1-1/16 inch projection brings the handle out from the front, giving space for fingers behind the pull, which helps when operating doors on thicker fronts or in tighter alcoves.
• The 1/4 inch width defines the gripping surface, giving a slim, contemporary profile that still offers enough edge for fingers to pull without slipping during everyday use.
• The 6-5/16 inch length or diameter dimension establishes the overall visual footprint, helping hardware align proportionally on wider drawer fronts or taller doors.
• The aluminum material keeps each pull light, which reduces stress on fasteners over time while still delivering a stable feel when mounted on cabinet faces.
• The black finish provides a consistent dark tone that coordinates with other black decorative hardware and moldings in the same installation.

Installation Dimensions For Accurate Handle Layout

This matte black cabinet pull is specified with a 3-25/32 inch center to center measurement, giving installers a clear distance between mounting points for drilling or layout templates. The pull uses 8-32 x 1 inch screw size, which matches a common thread and length used for cabinet hardware, aiding straightforward mounting into standard door and drawer thicknesses. With a projection of 1-1/16 inches, the handle stands off the surface far enough to operate comfortably while still staying close to the face for a low-profile look. The 1-1/2 inch base diameter at each mounting point defines the bearing area, helping the pull sit flat and flush against the cabinet front when fastened.

Using This Matte Black Pull In Cabinet Projects

Where This 96 mm Center Pull Fits Best

This 96 mm center to center pull fits applications where cabinets or drawers are drilled on a 3-3/4 inch spacing, so it works effectively on new casework and on replacements that share this pattern. The matte black finish ties into black decorative hardware and moldings, keeping the hardware family consistent across a kitchen, bath, or shop installation that already uses dark components. With an overall 6-5/16 inch length, the pull suits medium-width doors and drawers, positioning the grip area centrally while leaving visual margin at each end of the front. The 1/4 inch width and 1-1/16 inch projection combine to create a slim, modern profile that supports contemporary Advantage Series styling while still allowing a practical handhold for frequent door and drawer operation.

Why These Pull Details Support Repeatable Results

The defined 3-25/32 inch center to center measurement lets installers repeat hole spacing across multiple fronts, helping rows of pulls line up straight and consistent on long cabinet runs. The specified 8-32 x 1 inch screw size gives a known fastener interface, so hardware setups and drilling operations can follow a familiar pattern without reworking for unusual threads. Aluminum construction keeps weight down at each mounting location, which is useful where several pulls are mounted on large drawer banks or tall pantry doors. The 1-1/2 inch base diameter at each end increases the contact area with the door or drawer surface, supporting stable mounting when the pull is used daily. The black finish identifies the pull as part of a black hardware scheme, so trims, handles, and other elements in the Berenson decorative hardware and moldings category can be selected to stay visually coordinated on the project.

Common Questions About This Matte Black Cabinet Pull

Select This Pull For 96 mm Cabinet Layouts

The Berenson Contemporary Advantage Two pull in matte black brings a defined 3-25/32 inch center to center layout, 6-5/16 inch overall length, and aluminum construction together for practical cabinet work. These dimensions support consistent drilling, comfortable projection, and a coordinated black finish across doors and drawers. For projects built around 96 mm center to center hardware with a contemporary look, this Berenson 9024-4055-P pull aligns form and function for dependable cabinet operation.