Berenson Contemporary Advantage One Series 6-5/16" (160 mm) Center to Center Verona Bronze Pull, - 9031-40VB-P
Description
Berenson Contemporary Advantage One Pull For Cabinets
Berenson Contemporary Advantage One pull gives cabinets a contemporary aluminum handle with a Verona Bronze finish, so a modern profile ties in with warm-toned jobs. The 6-5/16 inch center-to-center layout, listed as 160 mm, sets a predictable handle spread that matches common drilling patterns on many custom and stock cabinet layouts. The pull length of 6-23/32 inch provides hand space along the face, which supports comfortable use on kitchen, bath, or shop storage doors and drawers. A projection of 1-3/16 inch holds the grip off the front, so fingers can wrap the pull without rubbing the surface every time it is used. The width of 13/32 inch keeps the pull visually light on the face, helping it suit streamlined designs while still presenting a defined line across the cabinet.
Key Verona Bronze Pull Details For Projects
- The Advantage Series designation ties this pull to a defined Berenson collection, which helps match it visually with other handles from the same family across a full cabinet run.
- The aluminum material keeps the pull itself metal while keeping weight low, which supports use on standard cabinet fronts without adding load to hinges or slides.
- The Verona Bronze finish establishes a specific bronze tone, so the color reads consistently across multiple pulls on a large installation.
- The 5-5/16 inch center-to-center dimension translates directly to drilling layout, which simplifies boring and repeat layout on multiple doors and drawers.
- The 7/16 inch base diameter defines the footprint where the pull meets the cabinet face, so installers can gauge edge clearances and stile widths from the spec.
Dimensions That Support Straightforward Pull Installation
The 160 mm center-to-center measurement on this Berenson pull sets fixed hole spacing, so jigs and boring templates can be set once and run repeatedly across cabinet fronts. The 6-23/32 inch overall length keeps the handle long enough to span wider drawer fronts, which can help visually center the pull and balance proportions on face frames or slab fronts. A projection of 1-3/16 inch positions the grip far enough from the door or drawer surface that hands can approach from above or below without contact against the wood or laminate. The 13/32 inch width defines a slim bar shape, which can sit comfortably on narrow rails while maintaining a clean, linear appearance.
Using This 9031-40VB-P Pull In Cabinet Work
Where This 160mm Center To Center Pull Fits
This Berenson Corporation handle sits in the Decorative Hardware & Moldings, Handles and Pulls category, so it targets cabinet and furniture applications that call for a visible pull on the face. The Contemporary Advantage One Series identity positions it for projects looking for a contemporary line on doors and drawers, helping it coordinate with other modern details in the room. Its Verona Bronze finish sets a defined bronze color, so it can tie into hinges, other pulls, and nearby metals in the same tone family. With a 5-5/16 inch center-to-center spec and 6-23/32 inch length, the pull works across a range of door widths and drawer sizes where that drilling spread and overall bar length provide both grip and visual balance.
Why These Handle Dimensions Help Repeatable Results
The specified 5-5/16 inch center-to-center dimension on the 9031-40VB-P pull gives installers a fixed boring target, which supports building and reusing drilling jigs for consistent alignment across an entire job. The 7/16 inch base diameter defines the contact area on the cabinet face, so edge distances can be planned so the bases sit fully on stiles or rails without overhang. A projection of 1-3/16 inch establishes how far the pull stands off the surface, which influences clearance around door reveals and nearby hardware when doors swing or drawers extend. The 13/32 inch bar width sets the handle thickness in hand, which helps buyers anticipate the feel and visual weight on narrow fronts or small drawers. The aluminum construction provides a metal pull body with controlled mass, which supports repeated operation on doors and drawers without adding unnecessary stress to the front panel.
Common Questions About This Berenson Cabinet Pull
What is the center-to-center size of this pull?
The Berenson Contemporary Advantage One pull has a 5-5/16 inch, or 160 mm, center-to-center distance, which sets the boring layout for mounting holes on cabinet doors and drawers.
How long is the Berenson 9031-40VB-P cabinet pull overall?
The 9031-40VB-P pull measures 6-23/32 inch in overall length, which spans a good portion of typical cabinet doors and drawers to provide a full hand grip area.
What material is used for this Verona Bronze pull?
The Berenson Advantage Series pull is made from aluminum, giving a metal handle that keeps weight down on cabinet fronts during everyday opening and closing.
How far does this cabinet handle project from the door?
This Berenson cabinet pull projects 1-3/16 inch from the surface, creating finger clearance between the handle and the cabinet face during use.
What is the finish on this Advantage Series pull?
The pull uses a Verona Bronze finish, providing a defined bronze tone that coordinates with other bronze-colored hardware in a room.
How wide is the bar on this cabinet pull?
The Berenson Contemporary Advantage One bar is 13/32 inch wide, giving a slim profile that still presents a clear gripping edge on cabinet fronts.
Selecting This Verona Bronze Pull For Your Job
The Berenson Contemporary Advantage One Series 9031-40VB-P pull combines a 160 mm center-to-center layout, aluminum construction, and a Verona Bronze finish, so it aligns with contemporary cabinet work that calls for a defined bronze metal handle. The specified length, projection, and width translate directly into drilling, clearance, and grip feel on real doors and drawers, helping plan layouts across kitchens, baths, and storage runs. For projects calling for a consistent modern pull in this size and finish, this Verona Bronze cabinet pull from Wurth Baer Supply is positioned to match those requirements.