Berenson Contemporary Advantage Two Series 3-3/4" (96 mm) Center to Center Champagne Pull, - 9033-40CZ-P
Description
Berenson Contemporary Advantage Two Pull For Cabinets
Berenson Contemporary Advantage Two pull is a 3-3/4 inch (96 mm) center to center cabinet handle, so it bridges standard drilled hole patterns on doors or drawers and keeps layout work straightforward on new or replacement jobs. The pull is part of the Advantage Series, which groups it with similar contemporary profiles for consistent styling across a project. Its aluminum material keeps weight down while providing a rigid grip point, which helps when installing across multiple fronts without stressing the door or drawer faces. A champagne finish gives a warm metallic look that coordinates with many laminates and painted surfaces in the shop or on site. The handle length of 6-5/16 inches provides finger clearance along the run, while the 1-1/16 inch projection creates space to grab without reaching too far past the cabinet front.
Key Details That Help On Cabinet Jobs
- The 96 mm center to center dimension matches 3-3/4 inch drilling, which streamlines layout on frameless or face-frame fronts and supports accurate jig or CNC setups.
- A total length of 6-5/16 inches spreads the pull visually across the front, which can help balance proportions on wider drawers or doors.
- The aluminum construction keeps the pull light, which can reduce load on thinner doors while still giving a solid gripping point for frequent use.
- A champagne finish provides a neutral metallic tone, which supports pairing this pull with a range of decorative hardware and moldings without clashing.
- The 1-1/2 inch base diameter creates a stable footprint against the cabinet surface, which helps distribute hand force around the mounting points.
- A 1/4 inch width presents a slim front profile, which supports a clean contemporary look and leaves more visible cabinet face around the pull.
Mounting And Fit Details For This 96 Mm Pull
This 96 mm center to center pull uses the standard hole spacing noted in the description, so installers can align it with existing 3-3/4 inch bore patterns on retrofits or run consistent spacing on new cabinetry. The 1-1/16 inch projection determines how far the pull stands off the face, giving room for fingers behind the handle while keeping the grip close enough to the door or drawer for controlled opening. A base diameter of 1-1/2 inches defines the contact area against the front, which can help cover minor chips at the bore and provide a clear mark for positioning when using templates. With a 1/4 inch width, the pull presents a narrow bar across the cabinet surface, which assists with tight layouts near edges or adjacent fronts.
Using This Champagne Pull In Real Projects
Where This Champagne Aluminum Pull Fits Best
This Champagne aluminum cabinet pull sits in the Decorative Hardware & Moldings, Handles and Pulls category, so it is suited to cabinet doors and drawers that call for a contemporary bar-style handle. As part of the Advantage Series, it can be used wherever a coordinated set of pulls is needed across a run of casework, because the series identity keeps styling consistent from unit to unit. The 3-3/4 inch (96 mm) center to center dimension positions it well on kitchen, bath, or shop cabinets drilled on that common spacing, giving installers a straightforward match to established layouts. Its champagne finish allows the same pull to move between lighter and darker fronts while maintaining a single tone throughout the project, which can simplify hardware selection when mixing materials.
Details That Support Repeatable Layout And Results
The 96 mm center to center measurement on the Berenson cabinet handle 96 mm allows installers to use existing jigs, line-boring, or CNC programs keyed to that spacing, which helps maintain repeatable handle placement from cabinet to cabinet. A 6-5/16 inch overall length gives a predictable dimension to reference off door or drawer edges, which can simplify setting reveals and aligning hardware lines across a bank. The 1-1/16 inch projection and 1/4 inch width define the grip geometry, which aids in predicting how far the handle will stand off the face and how it will feel in hand during daily operation. The 1-1/2 inch base diameter also offers a defined bearing surface, which can be useful when aligning multiple pulls visually and when covering slight variances at drilled holes, keeping finished fronts looking consistent.
Common Questions About This Berenson Cabinet Pull
What is the center to center measurement on this pull?
The pull has a 3-3/4 inch (96 mm) center to center dimension, which matches common cabinet drilling patterns and supports straightforward alignment across multiple fronts.
How long is the Berenson Contemporary Advantage Two pull overall?
The Berenson Contemporary Advantage Two pull has a total length of 6-5/16 inches, which spreads the grip across the front and helps proportion wider drawers or doors.
What material and finish does this cabinet pull have?
The pull is made from aluminum with a champagne finish, so it provides a light but rigid grip with a neutral metallic appearance for contemporary cabinetry.
How far does this 96 mm center to center pull project from the cabinet?
The pull projects 1-1/16 inches from the cabinet face, creating finger clearance behind the handle while keeping the grip close for controlled opening.
What are the width and base diameter of this handle?
The handle has a 1/4 inch width and a 1-1/2 inch base diameter, which gives a slim bar look with a broader bearing surface at the contact points.
Which series and category does this Berenson pull belong to?
This pull is part of the Advantage Series from Berenson Corporation and falls under Decorative Hardware & Moldings, Handles and Pulls, aligning it with cabinet door and drawer use.
Select This 96 Mm Pull For Coordinated Cabinets
The 9033-40CZ-P cabinet pull combines a 3-3/4 inch (96 mm) center to center layout, aluminum construction, and a champagne finish, giving installers a defined set of dimensions and appearance for cabinet fronts. With its 6-5/16 inch length, 1-1/16 inch projection, and 1/4 inch width, the pull offers a predictable footprint that supports consistent drilling, alignment, and grip across doors and drawers. For projects calling for Berenson Contemporary Advantage Two pull styling in a neutral metallic tone, this handle provides a straightforward option for building out a matching run of hardware.