Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Contemporary Advantage Three pull is a matte black aluminum cabinet handle designed around a 5-1/16 inch (128 mm) center to center hole spacing. That fixed drilling dimension lets you line this pull up with standard cabinet boring patterns for a straight swap on many layouts using that spread. The pull body measures 5-3/8 inches in overall length, so it reaches just past the mounting holes for a balanced look across typical drawer fronts and doors using that size range. A projection of 1-7/32 inches sets the grip off the face of the cabinet, giving hand clearance when you grab from above or below. The 1/2 inch width across the handle provides a defined edge to pull against without crowding smaller fronts. A base diameter of 25/32 inch at each mounting point visually caps the ends of the pull and sets a clear footprint on the door or drawer surface.
The 128 mm center to center measurement on this Berenson 9113-1055-P pull sets the mounting pattern, so once you lay out that spacing you can repeat the same hole locations across doors and drawers for consistent alignment. Its 5-3/8 inch overall length lets the handle reach slightly beyond the drilling points, which keeps the ends clear of the screw locations when you are driving fasteners from the back side. With a projection of 1-7/32 inches, the pull stands off enough to grip without your fingers contacting the cabinet face every time you open, which can help limit wear on finished surfaces. The 25/32 inch base diameter defines a rounded footprint at each screw location that visually anchors the pull on the face.
This Berenson Contemporary Advantage Three Series pull sits in the decorative hardware and moldings category under handles and pulls, so it is set up for cabinet doors and drawer fronts where you want a defined bar-style grip. The matte black finish lets it coordinate with other black elements in the space, such as hinges or appliance details finished in similar tones. Its 5-1/16 inch (128 mm) center to center drilling dimension lines up with a common metric spacing, which matters on jobs where casework or existing fronts are already bored at that distance and you need a pull that respects that pattern. On new work, that same spacing provides a clear target for setting up drilling jigs or CNC programs so each handle in the run lands in the same position.
The aluminum material of this Advantage Series cabinet handle keeps each pull relatively light, which helps when you multiply the hardware count across a full kitchen, office, or shop installation and want the door action to feel consistent. The 1/2 inch width along the grip gives you a predictable edge to pull against from job to job, so users get the same hand feel on drawers carrying different loads. With 1-7/32 inches of projection, the handle creates a defined gap between the cabinet face and the back of the pull, which provides clearance for fingers without requiring an exaggerated reach. The 25/32 inch base diameter at each mounting point forms a repeatable footprint at the screw locations, so every pull in a row presents the same circular pad against the surface. The specified 8-32 x 1 inch screw size connects the handle to a common cabinet fastener standard, which ties directly into typical door and drawer thicknesses drilled for that thread and length.
The Berenson Contemporary Advantage Three pull has a 5-1/16 inch (128 mm) center to center dimension, which sets the exact hole spacing you work with on cabinet doors and drawers.
The pull length is 5-3/8 inches, so it extends slightly beyond the 128 mm hole spacing to give a full hand grip area across the front.
This Berenson pull projects 1-7/32 inches off the cabinet face, creating a defined gap for fingers while keeping the handle close to the door plane.
The pull is made from aluminum with a matte black finish, pairing a lighter-weight metal body with a non-reflective, dark appearance on cabinet fronts.
The Berenson 9113-1055-P uses 8-32 x 1 inch screws, aligning the handle with a common cabinet screw thread and length for standard doors and drawers.
The handle width is 1/2 inch, giving a narrow but solid bar for gripping when opening or closing cabinet doors and drawers.
This Berenson Contemporary Advantage Three Series aluminum pull ties a 5-1/16 inch (128 mm) center to center layout to a 5-3/8 inch overall length, giving a defined size for cabinets planned around that drilling. The matte black finish supports jobs needing a dark, non-reflective handle, while the 1-7/32 inch projection and 1/2 inch width set a consistent hand feel. When a project calls for this specific spacing and look, this pull from Wurth Baer Supply fits that requirement.
Sold In: 1 Each
