Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Contemporary Advantage Three pull gives a 5-1/16 inch (128 mm) center to center span, which sets consistent hole spacing for cabinet doors or drawers. This matches standard drilling patterns, helping installers line up multiple pulls across a run of cabinets without layout changes.
The Champagne finish creates a specific look that can be matched across a job wherever the same finish is used, supporting visual continuity from door to drawer fronts. The pull is part of the Advantage Series, so it fits into that defined collection when a project calls for coordinated decorative hardware.
Made from zinc, this pull offers a metal construction that suits typical cabinet and woodworking environments where metal decorative hardware is required. The overall length of 5-3/8 inches gives you defined edge-to-edge coverage on the face of the cabinet, helping plan spacing relative to stile widths and drawer sizes.
The 128 mm (5-1/16 inch) center to center measurement is the primary installation dimension, because it specifies exactly where the two mounting points land on the cabinet front. This lets you set up drilling jigs or boring patterns to that metric or imperial spacing.
The pull projects 1-7/32 inches from the surface, so you know how far the grip stands out relative to door thickness and nearby components. With a width of 1/2 inch, the pull presents a defined gripping surface that pairs with the projection to establish a predictable handhold during daily use.
The base diameter of 25/32 inch at each end indicates the circular footprint resting on the door or drawer face. That measurement matters when laying out pulls near panel reveals or raised profiles, because it keeps the bases fully supported on flat material.
This Berenson 9116-10CZ-P pull fits decorative hardware applications where a 5-1/16 inch (128 mm) center to center layout is required on cabinet doors or drawer fronts. The defined spacing works well in kitchens, baths, or built-ins that follow this common drilling standard.
The 5-3/8 inch overall length gives a proportional handle size for many cabinet faces, allowing it to sit centered on medium-width drawers or vertically on doors. Because it belongs to the Advantage Series, it suits projects that call for a coordinated set of handles and pulls from the same product family.
The Champagne finish supports jobs designed around that finish tone, letting this pull be used wherever a matching decorative hardware look is specified. The zinc material makes it a metal pull suitable for typical woodworking environments where metal handles are preferred on casework.
The 128 mm center to center measurement allows installers to standardize boring jigs, so every door and drawer front can be drilled to the same spacing without re-measuring. That repeatability reduces layout variation when handling a full bank of cabinets.
The 1-7/32 inch projection defines a stable stand-off from the cabinet surface, which keeps the pull consistently reachable without interfering with adjacent fronts. Combined with the 1/2 inch width, it yields a predictable gripping profile that performs the same across all installed pieces.
The 25/32 inch base diameter helps align the pull visually with surrounding profiles, because each base lands with a uniform circular footprint. This consistency makes it easier to line up handles relative to panel edges and rail joints, maintaining even reveals from one front to the next.
The 5-3/8 inch overall length also aids repeatable alignment, since installers can reference the handle ends to door edges during layout. Together, these defined dimensions support efficient installation and uniform appearance across an entire hardware run.
The Berenson Contemporary Advantage Three pull has a 5-1/16 inch (128 mm) center to center size, which sets the distance between mounting points for drilling and alignment.
The Berenson 9116-10CZ-P pull has an overall length of 5-3/8 inches, giving a defined handle span to plan positioning on cabinet doors or drawer fronts.
This Advantage Series pull has a Champagne finish, so it matches projects and other decorative hardware specified in the same Champagne tone.
The Contemporary Advantage Three pull is made from zinc, providing a metal construction suitable for typical cabinet and woodworking hardware applications.
This cabinet pull has a projection of 1-7/32 inches from the cabinet surface, which sets a consistent stand-off distance for gripping clearance.
The pull has a width of 1/2 inch and a base diameter of 25/32 inch, defining the front face size and the circular footprint where it meets the cabinet.
This Berenson Contemporary Advantage Three pull combines a 5-1/16 inch (128 mm) center to center layout with a 5-3/8 inch overall length, so it fits cabinet runs designed around that spacing. The Champagne finish and zinc construction align with projects calling for metal decorative hardware in that finish tone. For work that relies on defined mounting dimensions and a coordinated Advantage Series look, this pull offers the specified measurements to plan drilling and alignment across your cabinets.
