Berenson Contemporary Advantage Three Series 3-3/4" (96 mm) Center to Center Brushed Nickel Pull, - 9120-1BPN-P

Berenson Advantage Three Pull For Cabinets

Berenson Contemporary Advantage Three pull gives cabinet doors and drawers a contemporary handle designed for everyday use in kitchens, baths, and built-ins. This pull is part of the Advantage Series, so it follows a consistent design language across matching hardware in that collection. The pull is made from zinc, which provides a solid metal feel while keeping the piece straightforward to work with during layout and installation. A brushed nickel finish tones down reflectivity, helping the pull sit visually clean on modern cabinet faces. The pull has a manufacturer part number 9120-1BPN-P, which lets shops and installers reorder the exact same item when repeating a job or matching existing hardware on an expansion. This pull is classified under Handles and Pulls, Berenson, giving hardware buyers a clear fit within decorative hardware programs.

Key Details That Support Cabinet Jobs

• The pull has a 3-3/4 inch (96 mm) center to center dimension, which sets precise hole spacing so drilling templates and CNC programs can be aligned for repeatable runs across multiple cabinet fronts.
• The overall length of 4-3/16 inch provides hand clearance across typical cabinet rail widths, allowing comfortable grip while leaving measurable margins at door or drawer edges during layout.
• A projection of 1-3/16 inch stands the pull off the face of the cabinet, giving fingers room to grasp while maintaining a low profile that stays within common clearance envelopes for adjacent doors.
• The pull width of 1/2 inch creates a slender bar profile, helping it sit neatly on narrow drawer fronts and providing a consistent visual band when multiple pulls are lined up in a run.
• A base diameter of 25/32 inch establishes the footprint at each mounting point, which helps cover standard drilled holes and gives designers a known bearing surface against the cabinet face.

Installation Dimensions For Accurate Layout

The 3-25/32 inch center to center measurement called out for this pull defines the exact spacing between mounting points, guiding jig settings and hole placement on doors and drawer fronts. With a 4-3/16 inch overall length, installers can reference both edges of the pull when aligning to panel margins, face-frame stiles, or drawer box centers. The 1-3/16 inch projection from the door or drawer surface affects how far the pull extends into the working space, which matters around tight clearances at walls, appliances, or adjacent cabinets. A 25/32 inch base diameter at each contact point spreads load and defines how much surface area bears against the cabinet, which impacts how the pull visually anchors on flat or profiled fronts.

Using This Berenson Pull In Real Projects

Where This 96 Mm Center Pull Fits Best

This pull is identified as a Berenson Contemporary Advantage Three Series piece, positioning it for projects that call for a contemporary aesthetic across cabinet runs. The 96 mm center to center dimension matches a widely used drilling standard, so it suits new cabinet builds set up around metric spacing as well as remodel work where 96 mm hole patterns are specified. Its role as a handle within the Advantage Series helps designers coordinate with other Berenson hardware from the same family, keeping door and drawer fronts visually consistent across a room or an entire project. The brushed nickel finish works as a muted metallic surface, which can tie in with brushed fixtures and appliances where glare control and a blended appearance are preferred. Because the material is zinc, the pull provides a solid metal component that integrates well with typical cabinet construction in residential or light commercial environments.

Why These Dimensions Support Repeatable Results

The 3-25/32 inch center to center distance gives fabricators a fixed drilling pattern they can program into jigs or CNC equipment, reducing layout time when running multiple fronts with the same hardware. An overall length of 4-3/16 inch offers a predictable edge-to-hole ratio, which helps maintain consistent reveals from door or drawer edges when applying standard layout rules across varied cabinet sizes. The 1-3/16 inch projection governs how the pull interacts with adjacent faces; on banks of drawers or paired doors, this projection keeps the gripping point clear of the cabinet plane while staying within expected clearance paths. A 1/2 inch width keeps the handle visually light on narrow fronts, which matters when using multiple pulls on smaller drawers where heavier bars could dominate the face. The base diameter of 25/32 inch ensures that, once mounted, each end of the pull covers the drilled area cleanly, supporting a finished look even on simple flat-panel cabinetry.

Common Questions About The 9120-1BPN-P Pull

Select This Pull For Consistent Cabinet Layouts

The Berenson Contemporary Advantage Three Series 96 mm center to center brushed nickel pull brings a defined set of dimensions and a clear brushed nickel finish to cabinet projects. With its 3-3/4 inch center to center spacing, 4-3/16 inch overall length, and 1-3/16 inch projection, it lets installers work from repeatable measurements across entire runs of doors and drawers. The zinc construction and 1/2 inch width support a straightforward, contemporary handle profile suited to the Advantage Series look. For projects calling for this specific combination of size, material, and finish, this pull offers a precise option to match design intent and drilling patterns.