Berenson Contemporary Advantage Three Series 3-3/4" (96 mm) Center to Center Champagne Pull, - 9121-10CZ-P
Description
Berenson Contemporary Advantage Three Pull For Cabinets
Berenson Contemporary Advantage Three pull is a cabinet handle from the Advantage Series that uses a 96 mm center to center dimension, so it fits drilling layouts designed around this common metric spacing. The pull is made from zinc, which provides a solid metal body that works well for decorative hardware in typical cabinet environments. Its champagne finish gives the pull a muted metallic tone that supports projects calling for a soft, modern look on doors and drawers. The overall length of 4-3/16 inches positions the grip so fingers find it easily on standard cabinet fronts. A projection of 1-3/16 inches sets the handle off the surface enough for a comfortable grasp. The 1/2 inch width provides a slim front profile, so the pull reads visually light while still offering a defined edge to pull against during use.
Key Advantage Series Pull Details For Projects
- The 96 mm center to center measurement aligns the two mounting points, which simplifies layout when drilling or matching to existing holes on cabinet doors and drawers.
- The 4-3/16 inch overall length defines the footprint on the face of the cabinet, helping plan spacing between adjacent pulls on banks of drawers or narrow fronts.
- The champagne finish sets a consistent color tone across hardware, which helps coordinate with other champagne decorative hardware and nearby fixtures on the project.
- The zinc material gives the pull a metal structure, supporting everyday cabinet opening and closing without the flex associated with lighter non-metal materials.
- The 1-3/16 inch projection determines how far the pull stands off the door or drawer front, setting hand clearance and reducing knuckle contact with the surface during use.
- The 1/2 inch width establishes a narrow, streamlined face, which suits designs that call for a clean linear look rather than a bulky handle.
- The base diameter of 25/32 inch defines the size of the footprint where the pull meets the cabinet surface, which helps cover the area around each mounting hole.
Installation Dimensions For Accurate Pull Alignment
The center to center size of 3-25/32 inches, listed alongside the 96 mm center to center dimension, links imperial and metric measurements so layouts can reference either scale during drilling. Using this measurement between mounting holes keeps each Berenson Contemporary Advantage Three pull square and level along a run of cabinets. The 8-32 x 1 inch screw size in the product data defines the fastener thread and length that pair with the pull, so the handle seats properly when drawn tight to the door or drawer front. The 25/32 inch base diameter around each mounting point provides coverage over the drilled area, helping the pull sit cleanly against the cabinet surface.
Using This Champagne Pull In Cabinet Work
Where This 96 mm Cabinet Pull Fits Best
The Berenson Contemporary Advantage Three Series pull with a 96 mm center to center layout suits cabinet and drawer fronts that are drilled on this spacing, so it integrates into many standard kitchen or bath runs using that pattern. The 4-3/16 inch overall length makes this pull a practical size for both doors and medium-width drawers, giving enough bar length for a full hand grip without overwhelming smaller fronts. Its champagne finish positions it well on projects that use lighter woods, painted doors, or soft metallic accents, maintaining a consistent decorative hardware appearance across the installation. Because the pull sits 1-3/16 inches off the surface, it provides usable clearance where fingers can wrap behind the bar on typical framed or frameless cabinet constructions.
Details That Support Consistent Cabinet Layouts
The combination of the 96 mm and 3-25/32 inch center to center values allows installers who work in either metric or imperial units to set out hole spacing consistently for this pull. The 1/2 inch width keeps the bar slim, which can help maintain straight visual lines when several Berenson Contemporary Advantage Three pulls are aligned across multiple drawers. A base diameter of 25/32 inch around each post helps visually anchor the handle while covering the immediate area around the mounting holes, which is useful on painted or stained surfaces where precise hole placement affects the finished look. The defined 8-32 x 1 inch screw size listed in the data ties the handle to a standard cabinet fastener specification, supporting repeatable fastening across a job that uses this same pull on many fronts.
Common Questions About This Berenson Cabinet Pull
What is the center to center size of this pull?
The Berenson Contemporary Advantage Three pull uses a 96 mm center to center, also listed as 3-25/32 inches, so hole spacing can follow either metric or imperial measurements on cabinet fronts.
How long is the Berenson 9121-10CZ-P cabinet pull?
The pull has an overall length of 4-3/16 inches, which defines how much of the cabinet or drawer front the handle spans from end to end.
What material and finish does this cabinet pull use?
The pull is made from zinc with a champagne finish, providing a metal handle with a soft metallic color suited to decorative cabinet hardware applications.
How far does the Advantage Series pull project from the cabinet?
The projection is 1-3/16 inches, meaning the pull stands that distance off the door or drawer surface, creating space for fingers behind the bar.
What are the width and base diameter of this pull?
The pull has a 1/2 inch width across the bar and a 25/32 inch base diameter at each mounting point, setting both the front profile and the footprint on the cabinet.
What screw size works with the Berenson 9121-10CZ-P pull?
The product data lists an 8-32 x 1 inch screw size, so the pull is designed around this common cabinet hardware fastener specification.
Select This Champagne Pull For 96 mm Layouts
The Berenson Contemporary Advantage Three Series 96 mm center to center champagne pull ties together zinc construction, a 4-3/16 inch overall length, and a 1-3/16 inch projection to support functional cabinet gripping. The defined 3-25/32 inch center to center spacing and 8-32 x 1 inch screw size give clear layout and fastening dimensions for cabinet runs. For projects based around a champagne finish and 96 mm drilling patterns, this pull provides a consistent handle option ready to drop into new or updated cabinet work.