Berenson Contemporary Advantage Four Series 3-3/4" (96 mm) Center to Center Champagne Pull, - 9125-40CZ-P

Berenson Contemporary Advantage Four Pull For Cabinets

Berenson Contemporary Advantage Four pull gives you a 3-3/4 inch (96 mm) center to center handle that sets consistent spacing across cabinet doors and drawers, which keeps layouts aligned on runs of base and wall cabinets. The pull is part of the Advantage Series, so it follows a coordinated design line when multiple pieces are used in the same project, helping maintain a unified look across a kitchen or shop build. The aluminum construction provides a metal handle with a solid feel in daily use while keeping overall weight down on smaller doors. A champagne finish adds a soft metallic tone that visually complements many painted or stained fronts, which simplifies finish selection on mixed-material jobs. With a 4-1/2 inch overall length, this pull leaves comfortable grip room past the mounting holes, so hands have clear access when opening heavier cabinet fronts.

Key Details That Support Cabinet Hardware Layouts

• The 3-3/4 inch (96 mm) center to center dimension sets a repeatable drilling pattern, speeding jig setup and helping rows of pulls stay straight across multiple cabinet faces.
• The 4-1/2 inch length or diameter provides extra handle beyond the mounting points, giving fingers more leverage on wider or heavier doors and drawer fronts during regular operation.
• The 1 inch projection spaces the pull off the surface, creating finger clearance that helps users grip comfortably without scraping knuckles along the cabinet face.
• The 7/16 inch width supplies a slimmer front profile, which keeps the hardware visually light while still offering enough surface for a stable hand contact point.
• The 9/16 inch base diameter gives each mounting foot a defined footprint against the door or drawer, helping the pull seat neatly where it meets the cabinet surface.
• The 8-32 x 1 inch screw size matches a common cabinet hardware thread, which supports straightforward hole threading and predictable engagement into the pull.

Mounting Dimensions For Straightforward Pull Alignment

The 96 mm (3-3/4 inch) center to center spacing on this Berenson pull defines exactly where to drill two mounting holes, so installers can rely on existing jigs or templates set for that common size. A projection of 1 inch from the cabinet face positions the grip away from the door enough to clear fingers, which is helpful on thicker doors or drawer fronts where space can feel tight. With a 4-1/2 inch overall length, the pull aligns neatly on standard drawer rails without overhanging typical face frame widths. The 8-32 x 1 inch screw size gives a known fastener thread and length for passing through standard cabinet door thicknesses into the pull body.

How This Berenson Pull Performs In Real Projects

Using The 96mm Pull On Cabinets And Drawers

This Berenson Contemporary Advantage Four pull, with its 3-3/4 inch (96 mm) center to center measurement, fits layouts built around that drilling size on both doors and drawers, which helps when matching hardware across a full room. The champagne finish provides a consistent color tone from piece to piece, supporting uniform appearance on banks of drawers or tall pantry doors. Because the pull length is 4-1/2 inches, it sits comfortably on standard kitchen drawer fronts, offering enough span so users can grab near either end when pulling wider drawers. A 1 inch projection keeps the handle far enough from the surface so fingers can wrap behind it, which is useful when someone is opening a base cabinet while standing close to the counter edge. The 7/16 inch width presents a slimmer face, so multiple pulls along a long run do not visually crowd the cabinet fronts.

Details That Help Repeatable Alignment And Operation

The 3-25/32 inch center to center dimension defined in the description ties directly to 96 mm spacing, which aligns with metric-based jigs and drilling machines in many cabinet shops, supporting quick, repeatable hole placement. The 9/16 inch base diameter at each end of the pull sets a clear contact circle on the door or drawer, so installers can visually center the base over the drilled holes and keep the pull square to edges. With aluminum as the material, the pull adds minimal extra weight to moving parts like taller doors, which helps hinges and slides operate as expected. The champagne finish across the aluminum body delivers a consistent surface that integrates into decorative hardware plans where matching finish is important from one handle to the next.

Common Questions About This 96mm Champagne Pull

Select This 96mm Champagne Pull For Consistent Layouts

The Berenson Contemporary Advantage Four Series 3-3/4 inch (96 mm) center to center champagne pull offers defined dimensions, from its 4-1/2 inch length to 1 inch projection, that support predictable cabinet layouts. The aluminum material and champagne finish align with the Advantage Series design language when coordinating hardware across a project. With a 9/16 inch base diameter and 7/16 inch width, the pull seats cleanly on doors and drawers while keeping a slim appearance. For projects organized around 96 mm spacing, this 9125-40CZ-P pull gives clear measurements for drilling and mounting so cabinets and drawers operate with a consistent grip feel.