Berenson Transitional Advantage Three Series 3-3/4" (96 mm) Center to Center Champagne Pull, - 9138-10CZ-P

Berenson Transitional Advantage Three Pull For Cabinets

Berenson Transitional Advantage Three pull provides a 3-3/4 inch (96 mm) center to center grip that works well on typical cabinet doors and drawers where this drilling pattern is already laid out. The pull is made from zinc, giving a solid metal feel that suits everyday cabinet use in kitchens, baths, or shop-built casework. Its champagne finish offers a light, neutral tone that pairs with a wide range of door and drawer finishes without dominating the facade. Overall length of 5 inches keeps the handle visually balanced on standard-width fronts while still leaving enough hand clearance. A projection of 1-3/16 inches spaces the hand away from the cabinet face for comfortable grabs during daily use. At 9/16 inch width, the pull presents a slim front profile that looks clean on both framed and frameless cabinet designs.

Key Advantage Three Pull Details For Projects

• The 3-25/32 inch center to center drilling, identified as 96 mm, aligns with a common hole spread, which helps when matching existing layouts or setting up consistent boring on new cabinet runs.
• The 5 inch overall length ties the mounting points together with slight overhang on each side, giving a proportional look on many drawer fronts and doors without crowding smaller panels.
• The zinc material provides a metal construction that supports repeat use on frequently opened cabinets, which matters in busy residential or shop installations.
• The champagne finish offers a muted, warm metallic appearance that blends with many hinge finishes and appliances, helping keep visual continuity across the room.
• The 1-3/16 inch projection stands the grip away from the face enough for fingers to wrap behind, which aids quick opening even when hands are larger or doors are recessed.
• The 9/16 inch width keeps the pull slim across the front, which can help maintain clean sightlines on modern or transitional cabinet designs.

Mounting And Fit Details For This Champagne Pull

The 96 mm center to center dimension on this Berenson Transitional Advantage Three pull sets the drilling pattern that installers match when laying out or reusing holes on doors and drawers. The 3-25/32 inch measurement ties directly to that spread, helping align boring templates or CNC programs around a known standard. With a 1/2 inch base diameter at each post, the pull covers a modest area around the screw holes, which is useful when dressing slight chipping at the bore or finishing edges around the mount. The specified 8-32 x 1 inch screw size defines the threaded connection through typical cabinet fronts, which supports secure attachment into standard door and drawer thicknesses used in many woodworking projects.

Using This Advantage Three Pull In Real Projects

Where The Berenson Transitional Advantage Three Pull Fits

This Berenson Transitional Advantage Three pull, with its 3-3/4 inch (96 mm) center to center layout, fits well on cabinet doors and drawers laid out for that common drilling distance, which often appears in kitchen, bath, and shop cabinetry. The 5 inch overall length keeps the pull scaled to standard face widths, so it can be used repeatedly across base and wall cabinets without visual imbalance. Its 1-3/16 inch projection creates a consistent stand-off from the face, supporting an easy grasp whether the pull is mounted vertically on doors or horizontally on drawers. The 9/16 inch width and 1/2 inch base diameter let the pull sit comfortably on rail and stile constructions or on slab fronts where a lean look is preferred. With zinc construction and a champagne finish, this pull coordinates with many existing decorative hardware lines specified for transitional cabinet styles.

Details That Support Consistent Installation Results

The defined 96 mm center to center spacing on this champagne zinc cabinet pull gives installers a repeatable reference for jigs, boring equipment, and layout marks, reducing layout variation across multiple fronts. Because that drilling size is described as 3-25/32 inch, it translates cleanly between metric and imperial setups on the bench. The 8-32 x 1 inch screw size standardizes the fastener specification at each mounting point, which helps streamline hardware selection and supports consistent thread engagement through common door and drawer thicknesses. A 1/2 inch base diameter provides enough bearing surface at each end of the pull to spread load around the drill hole area, which matters when doors are opened frequently. Combined with the 1-3/16 inch projection and 9/16 inch width, these dimensions work together to give predictable hand clearance and visual alignment across a full run of cabinets.

Common Questions About This Berenson Cabinet Pull

Select This Pull For 96 Mm Cabinet Layouts

The Berenson Transitional Advantage Three pull brings a 3-3/4 inch (96 mm) center to center layout, zinc construction, and a champagne finish that supports many cabinet designs. With a 5 inch overall length, 1-3/16 inch projection, and 9/16 inch width, it aligns well with typical drilling patterns and front sizes. For projects built around 96 mm spacing, this Berenson 9138-10CZ-P pull offers a consistent, defined set of dimensions that helps keep door and drawer hardware uniform across the entire run.