Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson brushed nickel cabinet pull delivers a 3-3/4 inch (96 mm) center to center mounting layout that sets consistent spacing for cabinet screws, which keeps runs of doors and drawers visually aligned across a project. The pull comes from the Transitional Advantage One Series, so its styling supports projects that need a balanced look between traditional and contemporary fronts. Its brushed nickel finish provides a muted metallic surface that helps fingerprints read less on active doors, useful in busy kitchens or shop-built installations. The pull uses zinc as the base material, giving a solid metal feel that responds well when doors are opened repeatedly throughout the day. Overall length of 6-3/16 inches establishes comfortable hand clearance across wider drawer fronts, so the pull can serve both small doors and moderate-width drawers on the same line.
The 3-25/32 inch center to center dimension provides a precise metric for positioning the two mounting holes, letting installers lay out boring patterns accurately across doors and drawers. This spacing aligns with the identified 96 mm center to center measurement, supporting metric-based shop setups without reworking templates. The pull uses a width of 1-1/4 inches across its face, which affects how it sits on narrow rails or small drawer fronts, helping plan hardware placement relative to panel edges and profiles. With a projection of 1-5/32 inches, the pull stands off the surface enough for fingers to wrap behind the bar, which can improve leverage when opening heavier fronts. The overall length of 6-3/16 inches helps installers plan side clearances where pulls sit near adjacent cabinets or walls.
This Berenson Transitional Advantage One Series pull serves cabinet and drawer applications where a 3-3/4 inch (96 mm) center to center pattern is desired, tying doors and drawers together with a unified drilling layout. In runs of base and wall cabinets, the 6-3/16 inch length visually anchors hardware on wider faces while remaining proportional on smaller doors. The brushed nickel finish coordinates with other brushed nickel decorative hardware and moldings in the same space, supporting a continuous look from handles to related trim. Zinc construction gives the pull a metal mass that suits residential kitchens, baths, and shop-built casework needing sturdy-feeling hardware. The 1-5/32 inch projection creates working space between the hand and the cabinet face, useful on thicker door profiles or applied moldings where fingers benefit from extra clearance.
The defined 3-25/32 inch center to center dimension lets installers repeat hole boring with confidence, so long cabinet runs maintain straight visual lines from pull to pull. The 7/16 inch base diameter at each mounting point helps cover standard drilled holes while leaving enough surrounding surface visible to showcase door or drawer materials. A 1-1/4 inch width means the grip presents a clear, easy-to-find target, which can help users reliably grasp the pull without crowding decorative profiles near the edges. The brushed nickel finish not only sets the visual tone but also softens reflected light along the pull, helping hardware appear consistent under varied room lighting. With zinc as the material, the pull supports a predictable screw bite at each mounting location, which is important when multiple units are installed across a bank of cabinets.
The Berenson Transitional Advantage One pull has a 3-3/4 inch (96 mm) center to center measurement, which sets the hole spacing and supports consistent drilling across cabinet doors and drawers.
The pull measures 6-3/16 inches in overall length, providing a grip that spans more of the door or drawer front for comfortable hand placement in daily use.
The Advantage Series brushed nickel pull is made from zinc, giving it a metal body that feels solid in the hand during regular cabinet and drawer operation.
The Berenson brushed nickel cabinet pull projects 1-5/32 inches from the surface, creating finger clearance that supports a comfortable grip without extending excessively.
The pull has a width of 1-1/4 inches, which influences how it sits on narrow rails or drawer fronts and provides a defined target area for the hand.
Each mounting base on this cabinet pull measures 7/16 inch in diameter, helping cover typical bore edges while keeping the mounting area visually compact.
The Berenson Transitional Advantage One Series 3-3/4 inch (96 mm) center to center brushed nickel pull offers defined dimensions that support repeatable drilling and layout work. Its zinc construction, brushed nickel finish, and 6-3/16 inch length help align the look and feel of doors and drawers across a project. For cabinet runs, built-ins, or shop-produced casework that use a 96 mm pattern, this pull provides the measurements needed to plan hole placement, grip spacing, and visual balance on each front.
Sold In: 1 Each
