Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Traditional Advantage Two pull gives you a 3 inch center to center cabinet pull in a champagne finish that suits many cabinet styles. The pull is made from zinc, which provides a solid metal feel for everyday cabinet and drawer use. Overall length of 5-3/4 inches spans more of the drawer front, which helps distribute hand contact and makes smaller doors or drawers feel more substantial. A width of 5/8 inch creates a comfortable gripping surface without crowding adjacent hardware on narrow rails. The 7/8 inch projection stands the pull off the front enough for fingers to hook behind it, supporting easier opening on heavier fronts. Matching 5/8 inch base diameter at each end gives a defined footprint, helping the pull visually align with face frame rails or inset panel edges.
This Berenson 9187-10CZ-P pull uses a 3 inch center to center mounting dimension, so hole spacing lines up with many common cabinet drilling jigs in the shop. The 5-3/4 inch overall length provides clear endpoints to mark when laying out a new installation line across several drawer fronts. A 7/8 inch projection positions the hand away from the cabinet face, allowing doors with moderate profile edges to swing without knuckles brushing the edge. Width of 5/8 inch works within narrow rails, helping keep the pull centered without overlapping raised profiles. The 5/8 inch base diameter at each mounting point establishes a clear seating area against the surface, supporting stable contact when tightening mounting fasteners.
The Berenson Traditional Advantage Two Series 3 inch center to center champagne pull fits cabinet and drawer fronts that are already drilled or planned at the 3 inch spacing, giving straightforward alignment on many framed or frameless cabinets. Its 5-3/4 inch length suits small to mid-size doors and drawers, which is useful in kitchens, baths, and built-ins that repeat this size across multiple fronts. The 7/8 inch projection keeps the hand away from recessed panel details or applied moldings, so the pull functions cleanly on both flat and profiled faces. With a 5/8 inch width and matching 5/8 inch base diameter, the pull occupies a modest footprint on the stile or drawer rail, helpful when hardware needs to work between panel reveals or on narrower drawer fronts.
The 3 inch center to center drilling on this Berenson 9187-10CZ-P pull allows installers to reuse many existing jigs, which helps maintain consistent spacing from door edges and reduces layout variability across a run. The 5-3/4 inch overall length gives a repeatable reference for setting pulls at a uniform distance from the drawer side, aiding visual alignment down tall cabinet stacks. A 7/8 inch projection provides consistent clearance behind the pull, which is valuable when doors open past adjacent appliances or trim where knuckle space is limited. The 5/8 inch width and 5/8 inch base diameter pair together so the visible footprint stays predictable from cabinet to cabinet, supporting a cohesive look when mixing this pull across doors and drawers in the same room.
The Berenson 9187-10CZ-P pull has a 3 inch center to center dimension, which matches many standard cabinet drilling patterns for straightforward replacements or new layouts.
The Traditional Advantage Two cabinet pull measures 5-3/4 inches in overall length, giving enough span to feel substantial on smaller doors and typical drawer fronts.
This champagne cabinet pull has a 7/8 inch projection, standing it off the cabinet face so fingers can easily grip behind the pull when opening doors or drawers.
The Berenson Traditional Advantage Two pull is made from zinc, giving a metal construction that supports regular opening and closing on cabinet doors and drawers.
This Berenson pull has a 5/8 inch width and a 5/8 inch base diameter, creating a defined footprint that can cover small marks around existing mounting holes.
The 9187-10CZ-P cabinet pull has a champagne finish, which offers a soft metallic tone for projects using similar champagne cabinet hardware.
The Berenson Traditional Advantage Two Series 3 inch center to center champagne pull combines zinc construction with a 5-3/4 inch length, 5/8 inch width, and 7/8 inch projection to support consistent cabinet work. These dimensions align with common drilling patterns and layout practices, helping runs of doors and drawers present a unified look. For projects calling for a champagne finish and 3 inch center to center spacing, this Berenson 9187-10CZ-P pull offers a defined footprint that coordinates across multiple cabinet locations.
