Berenson Traditional Advantage Three Series 3-3/4" (96 mm) Center to Center Champagne Pull, - 9192-10CZ-P
Description
Berenson Traditional Advantage Pull For Cabinets
Berenson Traditional Advantage Three pull gives you a 3-3/4 inch (96 mm) center to center handle that works as a straightforward cabinet or drawer pull. The zinc construction forms a solid handle body, which provides a stable gripping point for regular cabinet use. A champagne finish covers the pull surface, so the hardware presents a consistent color tone wherever it is mounted. The pull measures 4 inches in overall length, giving clear reference when laying out multiple handles along a run of doors or drawers. A 1 inch projection sets the handle off the front, creating finger clearance between the pull and the cabinet face. The 9/16 inch width keeps the profile narrow, which is useful on smaller faces where wider hardware could crowd the layout.
Key Dimensions And Details For Daily Use
- The 3-3/4 inch (96 mm) center to center dimension sets the mounting hole spacing, which guides drilling layouts and helps match this pull to pre-bored cabinet fronts.
- The 4 inch overall length defines the full bar span, which aids in visual planning when aligning multiple pulls across upper and lower cabinets.
- The 1 inch projection extends the grip away from the door face, creating working space for fingers while keeping the handle relatively close to the cabinet surface.
- The 9/16 inch width keeps the pull slim across the front, which helps on narrow rails and styles where wider hardware might interfere with edges.
- The 9/16 inch base diameter at each end determines the footprint on the cabinet, which matters when covering old marks or working close to panel details.
- The zinc material forms the body of the pull, providing a single-piece metal construction that supports everyday opening and closing cycles.
Installation Layout And Mounting Dimensions
The 3-25/32 inch stated center to center measurement describes the spacing between the two mounting points, giving a precise dimension for boring holes in new work. This spacing works alongside the 4 inch overall length, so installers can position the pull consistently across multiple cabinet faces. The 1 inch projection affects screw selection length and grip clearance, since the hardware stands that distance off the front surface. The 9/16 inch base diameter at both contact points defines the circular area that rests against the door or drawer front, which can be useful when aligning the pull relative to panel edges or decorative profiles. Together, these measurements support repeatable layouts across a full kitchen or bath run.
Using This Champagne Pull In Cabinet Projects
Where This Berenson Pull Fits Best
This Berenson Traditional Advantage Three Series pull belongs to the Advantage Series collection, which identifies it within Berenson decorative cabinet hardware lines. The 3-3/4 inch (96 mm) center to center size often appears on cabinet doors and drawers, so this pull fits common drilling patterns on many residential cabinet layouts. With a 4 inch overall length, the handle suits standard-width doors and medium drawers where a compact but usable grip is preferred. The champagne finish gives the pull a uniform color that can coordinate with other champagne-finished decorative hardware in the same area. As a handle and pull category product, it serves on both doors and drawers in kitchen, bath, or built-in cabinetry applications requiring a consistent style across multiple fronts.
Why These Dimensions Support Consistent Results
The specified 3-25/32 inch center to center dimension anchors drilling measurements, so hole placement remains consistent from cabinet to cabinet when using this model. The 1 inch projection influences how far the hand sits from the cabinet face, which can support comfortable gripping when opening heavier drawers. The 9/16 inch width helps maintain clearance from edge details, reducing the chance that the handle overlaps narrow stiles or rails on framed cabinetry. The 9/16 inch base diameter allows the pull to sit fully on flat sections of the door or drawer front, which is helpful when working around raised panel profiles. The zinc material provides a single, defined metal base for threading the specified 8-32 x 1 inch screws, creating a secure connection between the pull and the cabinet front during regular use.
Common Questions About This Berenson Cabinet Pull
What are the exact mounting dimensions of this pull?
The Berenson Traditional Advantage Three pull has a 3-3/4 inch (96 mm) center to center dimension, which sets the hole spacing and helps align multiple pulls on cabinet doors and drawers.
How long and wide is the Berenson 9192-10CZ-P pull?
The Berenson 9192-10CZ-P pull is 4 inches in overall length and 9/16 inch in width, giving a compact footprint that works well on standard cabinet doors and medium-sized drawers.
What projection does this champagne cabinet pull provide?
This champagne cabinet pull projects 1 inch from the cabinet face, creating space for fingers to grip while keeping the handle close to the door or drawer front.
What material is the Traditional Advantage Series pull made from?
The Traditional Advantage Series pull is made from zinc, which provides a solid metal body for the handle in everyday cabinet and drawer use.
What finish does this Berenson zinc cabinet pull have?
This Berenson zinc cabinet pull has a champagne finish, giving the visible surfaces a consistent color that coordinates with other champagne-finished decorative hardware.
Which screw size is specified for this cabinet pull?
The specified screw size for this cabinet pull is 8-32 x 1 inch, which matches the threaded mounting detail in the zinc handle body.
Selecting This Pull For Your Cabinet Run
The Berenson Traditional Advantage Three Series 3-3/4 inch (96 mm) center to center champagne pull combines a defined 3-25/32 inch mounting span with a 4 inch overall length, so layouts can be repeated accurately across doors and drawers. The zinc construction, 1 inch projection, and 9/16 inch base diameter establish clear physical dimensions that guide drilling, alignment, and grip space. When a cabinet project calls for a champagne-finished handle and pull solution with these specific measurements, this Berenson 9192-10CZ-P model offers a consistent option for building out a full run.