Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Advantage Series pull gives cabinets a transitional look using a steel handle with a Verona Bronze finish, which suits projects needing decorative hardware that bridges traditional and contemporary styles in a consistent series across multiple openings.
The 7-9/16 inch (192 mm) center to center dimension sets precise hole spacing, which matters when aligning multiple doors and drawers so replacement or new layouts follow a predictable drilling pattern on cabinet runs.
The overall length of 9-15/16 inches establishes the visual footprint on the face of the cabinet, which affects how the pull lines up with rail widths and door proportions on wider fronts or tall pantry doors.
A projection of 1-1/4 inches defines how far the pull stands off the surface, which matters for hand clearance and prevents fingers from rubbing the door or drawer face during regular use in a busy workspace or kitchen.
The 1/2 inch width and 3/8 inch base diameter describe the grip profile and contact points, which affects how the hand feels on the pull and how the base visually seats against the cabinet surface on framed or frameless construction.
The 7-9/16 inch (192 mm) center to center dimension defines where mounting holes land, which lets installers use standard jigs or repeatable measurements when drilling fronts for consistent alignment along upper and base cabinet runs.
The 9-15/16 inch overall length gives a clear reference for where the pull will sit visually on the face, which helps position it relative to stiles, rails, and drawer edges so lines stay even from cabinet to cabinet.
The 3/8 inch base diameter indicates the footprint at each contact point, which matters when working near narrow rails or edges because it shows how much flat surface is needed around the mounting area.
The 1-1/4 inch projection sets how far the hand sits off the door or drawer surface, which helps avoid knuckles contacting the face when pulling and supports smoother operation on thicker fronts.
This Berenson Transitional Advantage Two Series pull is part of the Advantage Series, which positions it as decorative hardware for cabinets where a coordinated look across multiple pieces is important in kitchens, baths, or built-ins using the same design language.
The Verona Bronze finish ties into projects calling for a bronze color tone, which helps hardware align with faucets, lighting, or other bronze elements so the cabinet handles read as part of a unified finish palette.
The 7-9/16 inch (192 mm) center to center size suits cabinet doors and drawers that can visually support a longer pull, which is useful on wider fronts or tall units where a small handle would look underscaled.
The 9-15/16 inch overall length makes this pull suitable for applications where a longer visual bar is preferred, which helps span more of the front on large drawers and adds presence on feature cabinets or tall pantry doors.
The 1/2 inch width keeps the grip profile relatively slim, which works well on doors with narrower rails or modern-styled fronts, helping the pull sit within the rail space without overwhelming the panel design.
The 3/8 inch base diameter keeps the contact points compact, which is helpful when working close to edges or within tight rail dimensions because the pull seats cleanly without covering decorative detail or profiling.
The 7-9/16 inch (192 mm) center to center dimension gives a fixed drilling pattern, which supports templated layouts so installers can repeat the same measurements across an entire job and maintain straight sightlines along rows of doors and drawers.
The 1-1/4 inch projection contributes to predictable hand clearance, which helps avoid interference with adjacent trim or neighboring doors because the stand-off distance from the face remains consistent on every front.
The steel construction paired with the Verona Bronze finish provides a solid-feeling handle surface, which gives users a firm grip and a finish that coordinates with other Verona Bronze decorative hardware elements in the same environment.
The 9-15/16 inch overall length helps set visual spacing from door edges and corners, which aids layout decisions so pulls land at consistent offsets on both left- and right-hand doors across a run.
The 1/2 inch width and 3/8 inch base diameter detail the proportion of grip to mounting points, which lets designers and installers anticipate how the pull will look on different door styles and choose fronts that complement its scale.
The manufacturer part number 9518-20VB-P identifies this exact Berenson Corporation pull, which helps keep reorders and matching across multi-phase projects accurate when adding new cabinets to an existing installation.
This pull has a 7-9/16 inch (192 mm) center to center dimension, which sets the hole spacing for drilling and helps match existing 192 mm layouts on cabinet doors and drawers.
The Berenson 9518-20VB-P pull is 9-15/16 inches long overall, which defines the visible length on the cabinet front and helps with positioning on wider doors or drawers.
This cabinet pull uses steel with a Verona Bronze finish, which provides a solid metal grip while matching other Verona Bronze decorative hardware on the same project.
This pull projects 1-1/4 inches from the cabinet surface, which sets hand clearance and helps prevent fingers from rubbing the door or drawer face during use.
The pull has a 1/2 inch width and a 3/8 inch base diameter, which define the grip thickness and the footprint at the mounting points on the cabinet face.
This Verona Bronze pull belongs to the Berenson Transitional Advantage Two Series, which identifies it as part of the Advantage Series decorative hardware line.
The Berenson Transitional Advantage Two Series pull with 7-9/16 inch (192 mm) center to center spacing offers a defined drilling pattern, which supports straightforward cabinet layouts when coordinating multiple doors and drawers in Verona Bronze.
The 9-15/16 inch overall length, 1-1/4 inch projection, and 1/2 inch width combine into a specific profile, which helps match this pull to fronts that suit a longer, transitional-style handle.
The steel construction and Verona Bronze finish from Berenson Corporation provide a consistent decorative hardware option, which supports projects that standardize on Advantage Series pulls across new or updated cabinetry.
Sold In: 1 Each
