Berenson Steel Series 6-5/16" (160 mm) Center to Center Satin Black Pull, - 9521-2055-P
Description
Berenson Steel Series Pull For Cabinet Jobs
Berenson Steel Series pull describes a steel handle from the Advantage Series, so it delivers a consistent look across projects that specify this collection. The 6-5/16 inch (160 mm) center to center dimension sets reliable spacing for cabinet or drawer mounting layouts. The overall 8-11/16 inch length gives the pull visual presence across wider fronts, helping align multiple fronts on banks of cabinets. A 1-1/4 inch projection creates finger clearance from the door or drawer face, supporting comfortable access when hands are wet or gloved. The 1/2 inch width and 3/8 inch base diameter define a slim profile that fits modern, linear designs. The finish is matte black, so the pull reads as a dark accent against light surfaces and blends into dark finishes. The manufacturer part number 9521-2055-P uniquely identifies this exact size, material, and finish for repeat ordering.
Key Matte Black Pull Details For Projects
- The pull uses steel construction, which provides a solid feel in hand during daily use and supports consistent performance across multiple openings.
- The 6-5/16 inch (160 mm) center to center mounting size allows precise hole drilling on doors and drawers that follow metric or inch-based layout drawings.
- The overall 8-11/16 inch length lets the handle span wider cabinet fronts, which helps visually balance tall or broad faces in kitchens or casework.
- The 1-1/4 inch projection holds the grip away from the surface, giving space for fingers to pull without scraping finished fronts.
- The matte black finish presents a low-sheen appearance that reduces glare and creates defined contrast against many cabinet colors.
Mounting Dimensions And Screw Fit Details
The pull specifies a 6-19/64 inch center to center dimension, aligning closely with the 160 mm stated size for layout on metric job plans. This dimension guides hole positioning so multiples line up cleanly across doors and drawers. The pull uses an 8-32 screw size, which matches a common cabinet hardware standard and supports straightforward threading into prepared holes or inserts. The 3/8 inch base diameter defines the footprint where the pull meets the surface, providing a predictable area to cover minor layout marks around mounting points. With a 1/2 inch width along the bar, the pull offers a defined gripping edge while keeping a narrow visual line across the front.
Using This Berenson Pull In Cabinet Work
Where This Advantage Series Pull Fits Best
This pull belongs to the Advantage Series, tying it to other Berenson pieces that share the same design family for cohesive hardware layouts. The center to center distance of 6-5/16 inches (160 mm) suits medium and larger cabinet doors or drawers that benefit from a longer grip point. The satin black description and matte black finish give the handle a dark, even tone that works on both painted and stained cabinetry where a contrasting pull is desired. The 8-11/16 inch overall length lets the hardware read proportionally on wider drawer fronts, so multiple pulls can align in straight runs on banks of base cabinets. Because the pull sits 1-1/4 inches off the surface, it provides clearance that is useful on frequently used kitchen, bath, or shop storage where hands need room behind the grip.
Details That Support Consistent Mounting Results
The 160 mm center to center dimension gives installers a fixed drilling pattern that transfers easily from templates to jobsite workpieces. The 6-19/64 inch stated spacing refines that measurement, helping align to detailed drawings when tight symmetry is required across multiple openings. The steel material provides rigidity across the 8-11/16 inch span, so the handle maintains its straight line when fastened at both ends. A 3/8 inch base diameter at each mounting point defines a compact contact area, which can help seat the pull firmly against flat cabinet faces. The specified 8-32 screw size simplifies selection from standard cabinet hardware fasteners, keeping threading consistent across the project. The 1/2 inch width offers enough surface for a confident grip while maintaining a slim profile that lines up neatly along door and drawer edges.
Common Questions About This 160 Mm Pull
What is the center to center size on this pull?
The pull has a 6-5/16 inch (160 mm) center to center dimension, which sets the hole spacing for consistent mounting on cabinet doors and drawers.
How long is the Berenson 9521-2055-P pull overall?
The Berenson 9521-2055-P pull measures 8-11/16 inches in overall length, giving it a substantial span across cabinet or drawer fronts.
What material is used for this Advantage Series pull?
The Advantage Series pull is made of steel, providing a solid-feeling handle that supports everyday cabinet and drawer operation.
What finish does this matte black cabinet pull have?
The cabinet pull has a matte black finish, giving it a low-sheen, dark appearance that contrasts cleanly with many cabinet surfaces.
What projection does this Berenson Steel Series pull provide?
This pull has a 1-1/4 inch projection from the mounting surface, which creates finger clearance for gripping doors and drawers.
What screw size is specified for this cabinet pull?
The cabinet pull specifies 8-32 screw size, aligning with a common cabinet hardware thread standard for mounting through door and drawer fronts.
Select This Pull For Black Steel Cabinet Runs
This Berenson Steel Series 6-5/16 inch (160 mm) center to center pull in matte black combines steel construction with a defined 8-11/16 inch length for balanced cabinet fronts. With 1-1/4 inch projection and 8-32 screw sizing, it supports straightforward installation across consistent layouts. The Advantage Series identity and part number 9521-2055-P allow repeat selection on future jobs where the same look and dimensions are required.