Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Steel Series 3 inch pull is a steel handle with a 3 inch center to center hole spacing, so it functions as a standard cabinet or drawer pull where 3 inch boring is already drilled. The pull is part of the Advantage Series, which groups it with other coordinated decorative hardware for consistent styling on a project. The matte black finish gives a dark, non-reflective look, which helps the pull visually blend with modern cabinet fronts. The steel material provides a solid feel in hand, which matters on frequently used cabinet doors and drawers. A length of 4-9/16 inches gives finger clearance past the screw holes, so the user can comfortably grab the pull from either side. A projection of 1-1/4 inches sets the pull off the surface, creating space behind for fingers during opening and closing.
This Berenson Corporation pull is drilled on a 3 inch center to center pattern, so it lines up with standard 3 inch cabinet boring and replacement layouts. The 4-9/16 inch overall length leaves material extending past each screw location, which supports mounting across rail sections on typical cabinet doors. With a 1-1/4 inch projection, the handle stands far enough off the face for a full finger grip while still staying close to the cabinet front. The 1/2 inch width provides a narrow front edge, so the handle occupies limited space on narrower drawer fronts. A base diameter of 3/8 inch at each mounting point localizes the footprint where it contacts the wood surface, which helps when aligning over existing holes on face frames or drawer fronts.
The Berenson Steel Series 3 inch pull works on cabinet doors and drawers that are drilled for a 3 inch center to center pull, because its mounting holes match that spacing. The 4-9/16 inch length suits doors with mid-size rails, as the handle spans the rail without crowding the edges. A 1/2 inch width keeps the hardware visually light on narrow drawer fronts, useful in kitchens, baths, or shop cabinets where multiple pulls sit close together. The matte black finish supports installations on dark painted or stained fronts, where a subdued hardware line is preferred. With a 1-1/4 inch projection, the pull provides clearance for gloved or larger hands to grab behind the bar in utility or workshop cabinetry.
The defined 3 inch center to center measurement on this Advantage Series cabinet pull lets installers use standard jigs and drilling templates without changing settings between doors and drawers. The 4-9/16 inch overall length provides a known span that helps in visual planning, especially when aligning multiple pulls on wide drawer banks. A consistent 1-1/4 inch projection keeps the handle projecting the same distance across an entire run, which maintains uniform hand clearance from cabinet to cabinet. The 1/2 inch width and 3/8 inch base diameter give predictable bearing points on the front surface, useful when laying out hardware relative to panel edges or stile widths. Because the pull is made from steel, it maintains its shape under normal operating forces, which helps keep alignment consistent over time once installed.
The Berenson 9544-2055-P pull has a 3 inch center to center, 4-9/16 inch overall length, 1/2 inch width, and 1-1/4 inch projection, giving installers clear layout and hand clearance information.
The 3 inch center to center spacing matches a common cabinet drilling pattern, so installers can use standard jigs for boring and easily align replacements on existing doors and drawers.
This Advantage Series cabinet pull is made from steel, providing a solid-feeling handle that supports regular opening and closing on frequently used cabinet fronts.
The 1-1/4 inch projection stands the pull off the cabinet face, creating space behind the bar so fingers can hook comfortably when pulling doors or drawers open.
The pull has a matte black finish, giving it a low-gloss appearance that works well on contemporary or dark-colored cabinet doors and drawers.
The 3/8 inch base diameter defines the contact point at each mounting hole, helping installers understand how much surface area the pull covers around existing bores.
The Berenson Steel Series 3 inch pull in matte black combines a 3 inch center to center layout, steel construction, and a 4-9/16 inch overall length, giving clear sizing and material details for cabinet work. The 1-1/4 inch projection and 1/2 inch width define how far the handle stands off and how much front face it occupies, which supports consistent planning across doors and drawers. For projects calling for a matte black, steel Advantage Series pull with standard 3 inch boring, this model 9544-2055-P offers the necessary measurements and finish details for straightforward selection.
Sold In: 1 Each
