
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Advantage Series pull uses a 3-3/4 inch (96 mm) center to center, which sets a consistent drill layout across doors and drawers. That spacing helps streamline cabinet runs when you are repeating the same hole pattern on multiple fronts. The pull is made from steel, giving a solid feel in hand and a stable connection between front and fastener point. A matte black finish provides a satin, low-sheen look that pairs cleanly with many door styles while visually minimizing fingerprints. Overall length of 5-3/8 inches offers enough hand clearance over typical cabinet edge profiles, which supports comfortable everyday use. A projection of 1-1/4 inches sets the pull out from the face, leaving finger room without catching on clothing as people pass by. Width of 1/2 inch keeps the profile slim, which helps when you are lining up several pulls in a tight visual grid.
The 96 mm center to center layout on this Berenson steel cabinet pull aligns with a common drilling standard, so a single jig setting can be used repeatedly across a full kitchen or bank of office cabinets. The manufacturer specifies screw size 8-32 x 1 inch, which matches a common machine screw thread used in cabinet hardware, making it straightforward to tap into pre-bored fronts using standard tooling. With a width of 1/2 inch, the pull body stays clear of adjacent hardware on narrow rails, helping avoid interference when doors are closely spaced. The 1-1/4 inch projection helps create enough clearance for fingers even when fronts have applied moldings or thicker decorative edges, which keeps the pull usable after door detailing is complete.
This Berenson Advantage Series pull in matte black is suited to cabinet and drawer fronts where a 3-3/4 inch (96 mm) center to center pattern is desired, so it fits projects built around that common spacing. The satin-style black finish pairs with other matte black decorative hardware, allowing a uniform look across a room using the same color tone. Its 5-3/8 inch overall length makes the handle stand out enough on larger drawer faces, which helps users visually locate the pull and grab it quickly. On narrower doors, the 1/2 inch width helps the pull sit neatly within rails and stiles, keeping the hardware from dominating the face design. The 3/8 inch base diameter defines a small contact area, so the pull fits comfortably on slim framing members without crowding panel details or adjacent edges.
The 96 mm center to center dimension on this 9545-2055-P cabinet pull lets installers set up a drill guide or CNC program once, supporting repeatable hole placement and reducing layout time on larger runs. A projection of 1-1/4 inches keeps the hand away from the door surface during operation, which helps limit contact with the finish around the pull over repeated openings. Steel as the material ties the grip directly to a rigid base, giving a solid feel under load when users pull on heavy drawers. The 1/2 inch width and 5-3/8 inch overall length combine to provide a balanced handle, so forces from either side of the pull transfer cleanly back to the two 96 mm mounting points. The 3/8 inch base diameter also helps cover the immediate drill area at each end, which can visually tidy the transition from pull foot to cabinet face.
The Berenson Advantage Series pull has a 3-3/4 inch (96 mm) center to center, which defines the hole spacing needed on cabinet or drawer fronts during installation.
The pull length is 5-3/8 inches, providing a comfortable grip span that works on both cabinet doors and wider drawer fronts.
The 9545-2055-P cabinet pull is made from steel, giving a solid, rigid structure suitable for frequent use on doors and drawers.
This cabinet handle has a matte black finish, providing a low-sheen, satin appearance that coordinates with other black decorative hardware.
The pull projects 1-1/4 inches from the cabinet face, leaving space for fingers behind the handle while keeping the profile compact.
The specified screw size is 8-32 x 1 inch, matching a common machine screw thread used for mounting cabinet pulls through standard door and drawer fronts.
This Berenson steel cabinet pull with 3-3/4 inch (96 mm) center to center suits projects built around that standard spacing, supporting efficient drilling and consistent alignment. The matte black finish and 5-3/8 inch length give a practical grip area that coordinates with other black decorative hardware. With a 1-1/4 inch projection and 1/2 inch width, the handle balances finger clearance and a slim profile on both doors and drawers. Select this Advantage Series pull when a steel, matte black option with these specific dimensions matches your cabinet layout plan.
Sold In: 1 Each